Tightening Torque Specifications

CAUTION: For fastener with * (asterisk) below, be sure to tighten it according to specified procedure in "Repair Instructions".

TIGHTENING TORQUE SPECIFICATIONS

Fastening part	Tightening torque
Fastening part	N.m	kgf-m	lbf-ft
Transmission oil drain plug	23	2.3	17.0
Transmission oil filler plug	23	2.3	17.0
Extension case oil drain plug	23	2.3	17.0
Extension case oil filler plug	23	2.3	17.0
Gear shift control lever case cover bolt	10	1.0	7.5
Control lever boot cover bolt	12	1.2	9.0
Back up light switch	23	2.3	17.0
Gear shift lever front case bolt	23	2.3	17.0
Control shaft joint bolt	33	3.4	24.5
Control bush bolt	13	1.3	9.5
Engine rear mounting No. 1 bolt	55	5.5	40.0
Engine rear mounting member bolt	55	5.5	40.0
Engine rear mounting No. 2 bolt	55	5.5	40.0
Transmission to engine bolt and nut	85	8.5	61.5
Clutch housing lower plate bolt	11	1.1	8.0
Low gear shift inverse lever bolt	23	2.3	17.0
Transmission case bolt	23	2.3	17.0
Reverse shaft bolt	23	2.3	17.0
Gear shift locating bolt	23	2.3	17.0
Adapter case bolt	23	2.3	17.0
Input shaft 5th hub nut	210	21.0	152.0
Countershaft front bearing nut	210	21.0	152.0
Extension to transmission bolt	23	2.3	17.0
Extension case bolt	23	2.3	17.0
Damper bolts	50	5.0	36.5

Reference:

For the tightening torque of fastener not specified in this information, refer to FASTENER INFORMATION .