Section 1284 (Warning System - Side & Rear Vision)
WARNING: This page is about a different car, the 2010 Mercury Milan, 2010 Lincoln MKZ, and 2010 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
- Description And Operation
- Diagnosis And Testing
- Blind Spot Monitoring
- Special Tool(s)
- Principles of Operation
- Inspection and Verification
- DTC Tables
- Symptom Table
- Pinpoint Tests
- Pinpoint Test A: The Blind Spot Information System (BLIS™) Is Inoperative/Does Not Operate Correctly Or Poor Performance And No Message Center Warning Message Or Warning Led Indicators Present
- Pinpoint Test B: The Cross Traffic Alert (CTA) System Is Inoperative/Does Not Operate Correctly Or Poor Performance And No Warning Led Indicators Present
- Pinpoint Test C: The Left Or Right Exterior Mirror Blind Spot Information System (BLIS™)/Cross Traffic Alert (CTA) LED Is Constantly On And A Message In The Instrument Panel Cluster (IPC) Message Center Is Present, But No DTCs Are Recorded
- Pinpoint Test D: DTC B11D6:11 Or DTC B11D6:15
- Pinpoint Test E: The Side Obstacle Detection Control Module - Right (SOD-R) Does Not Respond To The Scan Tool Or Cannot Be Configured
- Pinpoint Test F: The Instrument Panel Cluster (IPC) Message Center Displays A Blocked Sensor Message
- Pinpoint Test G: The Blind Spot Information System (BLIS™) and Cross Traffic Alert (CTA) System Cannot Be Turned Off In The Instrument Panel Cluster (IPC) Message Center
- Pinpoint Test H: DTC U3000:44 Or DTC U3000:49
- Pinpoint Test I: The Left Or Right Exterior Mirror Blind Spot Information System (BLIS™)/Cross Traffic Alert (CTA) LED Appears Dim Or Does Not Illuminate With No DTC Or Message In The Instrument Panel Cluster (IPC) Message Center Present
- Blind Spot Monitoring
- Removal And Installation