LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Volkswagen >> 2012 >> Routan S >> Repair and Diagnosis >> External Pages >> Different car >> Section 1284 (Warning System - Side & Rear Vision) >> Diagnosis And Testing >> Blind Spot Monitoring >> Principles of Operation >> Notes
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Principles of Operation: Notes

WARNING: This page is about a different car, the 2010 Mercury Milan, 2010 Lincoln MKZ, and 2010 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: The Smart Junction Box (SJB) is also known as the Generic Electronic Module (GEM).
NOTE: If the vehicle is towing a trailer, the Blind Spot Information System (BLIS™) or Cross Traffic Alert (CTA) system might detect the trailer, causing a false alert.
NOTE: The BLIS™  and CTA  system both utilize the Side Obstacle Detection Control Module - Left (SOD-L), Side Obstacle Detection Control Module - Right (SOD-R) and the exterior mirror BLIS™  /CTA  LEDs.

The SOD-L  and SOD-R  run a self diagnostic check on each vehicle start cycle and illuminate the exterior mirror BLIS™  /CTA  amber LED for approximately 3 seconds indicating that the BLIS™  and CTA  system is operational. For BLIS™  , the exterior mirror BLIS™  /CTA  LED is at 95 percent illumination to be seen clearly during the day and is dimmed down to 10 percent at night. For the CTA  system, the exterior mirror BLIS™  /CTA  LED is always at 85 percent illumination.