Tightening Torque Specifications
| Fastening part | Tightening torque | Note | ||
|---|---|---|---|---|
| N.m | kgf-m | lbf-ft | ||
| Transmission oil drain plug | 23 | 2.3 | 17.0 | Refer to Manual Transmission Oil Change |
| Transmission oil filler plug | 23 | 2.3 | 17.0 | Refer to Manual Transmission Oil Change |
| Extension case oil drain plug | 23 | 2.3 | 17.0 | Refer to Extension Case Oil Change |
| Extension case oil filler plug | 23 | 2.3 | 17.0 | Refer to Extension Case Oil Change |
| Gear shift control lever case cover bolt | 10 | 1.0 | 7.5 | Refer to Transmission Shift Control Lever Removal and Installation |
| Control lever boot cover bolt | 12 | 1.2 | 9.0 | Refer to Transmission Shift Control Lever Removal and Installation |
| Back up light switch | 23 | 2.3 | 17.0 | Refer to Back Up Light Switch Removal and Installation |
| Gear shift lever front case bolt | 23 | 2.3 | 17.0 | Refer to Gear Shift Lever Front Case Assembly Removal and Installation |
| Control shaft joint bolt | 33 | 3.4 | 24.5 | Refer to Transmission Shift Control Lever Removal and Installation |
| Control bush bolt | 13 | 1.3 | 9.5 | Refer to Transmission Shift Control Lever Removal and Installation |
| Engine rear mounting No. 1 bolt | 55 | 5.5 | 40.0 | Refer to Engine Rear Mounting Replacement |
| Engine rear mounting member bolt | 55 | 5.5 | 40.0 | Refer to Transmission Shift Control Lever Removal and Installation and Manual Transmission Assembly Dismounting and Remounting |
| Engine rear mounting No. 2 bolt | 55 | 5.5 | 40.0 | Refer to Engine Rear Mounting Replacement and Manual Transmission Assembly Dismounting and Remounting |
| Transmission to engine bolt and nut | 85 | 8.5 | 61.5 | Refer to Manual Transmission Assembly Dismounting and Remounting |
| Clutch housing lower plate bolt | 11 | 1.1 | 8.0 | Refer to Manual Transmission Assembly Dismounting and Remounting |
| Low gear shift inverse lever bolt | 23 | 2.3 | 17.0 | Refer to Manual Transmission Unit Reassembly |
| Transmission case bolt | 23 | 2.3 | 17.0 | Refer to Manual Transmission Unit Reassembly |
| Reverse shaft bolt | 23 | 2.3 | 17.0 | Refer to Manual Transmission Unit Reassembly |
| Gear shift locating bolt | 23 | 2.3 | 17.0 | Refer to Manual Transmission Unit Reassembly |
| Adapter case bolt | 23 | 2.3 | 17.0 | Refer to Manual Transmission Unit Reassembly |
| Input shaft 5th hub nut | 210 | 21.0 | 152.0 | Refer to Input Shaft Reassembly |
| Countershaft front bearing nut | 210 | 21.0 | 152.0 | Refer to Countershaft Disassembly and Reassembly |
| Extension to transmission bolt | 23 | 2.3 | 17.0 | Refer to Extension Case Assembly Removal and Installation |
| Extension case bolt | 23 | 2.3 | 17.0 | Refer to Extension Case Disassembly and Reassembly |
| Damper bolts | 50 | 5.0 | 36.5 | Refer to Extension Case Disassembly and Reassembly |
NOTE:
The tightening torque(s) also specified in:
Manual Transmission Assembly Components
Gear Shift Control Lever Assembly Components
Gear Shift Lever Front Case Assembly Components
Gear Shift Shaft and Fork Components
Input Shaft Assembly, Output Shaft Assembly and Countershaft Assembly Components
Extension Case Assembly Components
Manual Transmission Assembly Components
Gear Shift Control Lever Assembly Components
Gear Shift Lever Front Case Assembly Components
Gear Shift Shaft and Fork Components
Input Shaft Assembly, Output Shaft Assembly and Countershaft Assembly Components
Extension Case Assembly Components
Reference:
For the tightening torques of fasteners not specified in this page, refer to: FASTENER INFORMATION