LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2013 >> Grand Vitara Base >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Front Suspension >> Specifications >> Tightening Torque Specifications
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Tightening Torque Specifications

Fastening part Tightening torque Note
N.m kgf-m lbf-ft
Tie-rod end lock nut 65 6.5 47.0 Refer to Front Wheel Alignment Inspection and Adjustment 
Strut bracket nut 128 13.1 94.5 Refer to Front Strut Assembly Removal and Installation  and Steering Knuckle Removal and Installation 
Brake hose mounting bolt 25 2.5 18.0 Refer to Front Strut Assembly Removal and Installation 
Stabilizer joint nut 60 6.0 43.5 Refer to Front Strut Assembly Removal and Installation  and Front Suspension Frame, Stabilizer Bar and/or Bushing Removal and Installation 
Front wheel speed sensor harness clamp bolt 11 1.1 8.5 Refer to Front Strut Assembly Removal and Installation 
Strut support nut 50 5.0 36.5 Refer to Front Strut Assembly Removal and Installation 
Strut nut 70 7.0 51.0 Refer to Front Strut Assembly Disassembly and Reassembly 
Wheel hub housing bolt 50 5.0 36.5 Refer to Front Wheel Hub Assembly Removal and Installation 
Drive shaft nut 220 22.0 159.5 Refer to Front Wheel Hub Assembly Removal and Installation  and Suspension Control Arm Removal and Installation 
Suspension control arm ball joint nut 55 5.5 40.0 Refer to Steering Knuckle Removal and Installation  and Suspension Control Arm Removal and Installation 
Front wheel speed sensor bolt 11 1.1 8.5 Refer to Steering Knuckle Removal and Installation 
Wheel nut 100 10.0 72.5 Refer to Front Wheel Hub, Disc, Nut and Bearing Check 
Suspension control arm nut 128 13.1 94.5 Refer to Suspension Control Arm Removal and Installation 
Stabilizer bar mounting bracket bolt 50 5.0 36.5 Refer to Front Suspension Frame, Stabilizer Bar and/or Bushing Removal and Installation 
Suspension frame mounting bolt 128 13.1 94.5 Refer to Front Suspension Frame, Stabilizer Bar and/or Bushing Removal and Installation 
Engine front body side mounting nut 55 5.5 40.0 Refer to Front Suspension Frame, Stabilizer Bar and/or Bushing Removal and Installation 
Pipe bracket bolt 11 1.1 8.5 Refer to Front Suspension Frame, Stabilizer Bar and/or Bushing Removal and Installation 
Union gear box bolt 35 3.5 25.5 Refer to Front Suspension Frame, Stabilizer Bar and/or Bushing Removal and Installation 

Reference: 

For the tightening torques of fasteners not specified in this page, refer to: FASTENER INFORMATION