LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2012 >> Grand Vitara Base >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Rear Suspension >> Specifications >> Tightening Torque Specifications
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Tightening Torque Specifications

Fastening part Tightening torque Note
N.m kgf-m lbf-ft
Control rod mount nut 128 13.1 94.5 Refer to Rear Wheel Alignment Inspection and Adjustment 
Lower arm mount nut 128 13.1 94.5 Refer to Rear Wheel Alignment Inspection and Adjustment  and Rear Coil Spring and Bump Stopper Removal and Installation  and Lower Arm Removal and Installation  and Upper Arm Removal and Installation 
Shock absorber upper bolt 60 6.0 43.5 Refer to Rear Shock Absorber Removal and Installation  and Rear Coil Spring and Bump Stopper Removal and Installation  and Lower Arm Removal and Installation  and Upper Arm Removal and Installation 
Shock absorber lower bolt 90 9.0 65.0 Refer to Rear Shock Absorber Removal and Installation  and Rear Coil Spring and Bump Stopper Removal and Installation  and Lower Arm Removal and Installation  and Upper Arm Removal and Installation 
Bump stopper 50 5.0 36.5 Refer to Rear Coil Spring and Bump Stopper Removal and Installation 
Lower arm outer bolt 128 13.1 94.5 Refer to Rear Coil Spring and Bump Stopper Removal and Installation  and Lower Arm Removal and Installation  and Upper Arm Removal and Installation  and Rear Suspension knuckle Removal and Installation 
Parking cable clamp bolt (M6) 11 1.1 8.5 Refer to Control Rod Removal and Installation 
Control rod mount nut 128 13.1 94.5 Refer to Control Rod Removal and Installation  and Upper Arm Removal and Installation 
Control rod outer bolt 128 13.1 94.5 Refer to Control Rod Removal and Installation  and Upper Arm Removal and Installation  and Rear Suspension knuckle Removal and Installation 
Trailing rod mount bracket bolt 105 10.5 76.0 Refer to Trailing Rod Removal and Installation 
Trailing rod mount nut 128 13.1 94.5 Refer to Trailing Rod Removal and Installation  and Upper Arm Removal and Installation 
Trailing rod rear bolt 128 13.1 94.5 Refer to Trailing Rod Removal and Installation  and Upper Arm Removal and Installation  and Rear Suspension knuckle Removal and Installation 
Rear wheel speed sensor harness clamp bolt 11 1.1 8.5 Refer to Upper Arm Removal and Installation  and Rear Suspension Frame Removal and Installation 
Upper arm mount nut 128 13.1 94.5 Refer to Upper Arm Removal and Installation 
Rear suspension frame mount bolt 128 13.1 94.5 Refer to Rear Suspension Frame Removal and Installation 
Parking cable clamp bolt (M8) 25 2.5 18.0 Rear Suspension Frame Removal and Installation 
Rear wheel hub housing bolt 50 5.0 36.5 Refer to Rear Wheel Hub Assembly Removal and Installation 
Rear drive shaft nut 220 22.0 159.5 Refer to Rear Wheel Hub Assembly Removal and Installation 
Wheel nut 100 10.0 72.5 Refer to Rear Wheel Disc, Nut and Bearing Check 
Upper arm joint nut 55 5.5 40.0 Refer to Rear Suspension knuckle Removal and Installation 

Reference: 

For the tightening torques of fasteners not specified in this page, refer to: FASTENER INFORMATION