LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2008 >> XL7 Base, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Cruise Control Systems >> Repair Instructions >> Cruise Control Release Switch Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

  1. Remove the instrument panel left lower closeout panel. refer to INSTRUMENT PANEL INSULATOR PANEL REPLACEMENT - LEFT SIDE .
  2. Remove the knee bolster. refer to KNEE BOLSTER REPLACEMENT .
    Fig 1: Identifying Cruise Brake Switch Connector
    G05471741Courtesy of SUZUKI OF AMERICA CORP.
  3. Disconnect the cruise brake switch connector.
    Fig 2: Identifying Cruise Brake Switch Connector
    G05471742Courtesy of SUZUKI OF AMERICA CORP.
  4. Rotate the cruise brake switch counterclockwise and remove the cruise brake switch from the switch retainer.
    NOTE: Depressing the brake pedal will allow easier access of the retainer locking tabs.
  5. Gently compress the locking tabs on the cruise brake retainer and remove the switch retainer from the brake pedal assembly.
scientia non olet · About LEMON Manuals