Manual Transaxle Unit Dismounting and Remounting: Remounting

CAUTION:

Care should be taken not to scratch oil seal lip with drive shaft while raising transaxle.
Do not hit drive shaft joint with hammer when installing it into differential gear.

Reverse dismounting procedure for remounting of transaxle, noting the following points.

Tighten each bolts and nuts to specified torque referring to MANUAL TRANSAXLE UNIT COMPONENTS and ENGINE MOUNTINGS COMPONENTS .
Set each clamp for wiring securely.
Fill transaxle oil and transfer oil referring to MANUAL TRANSAXLE OIL CHANGE and TRANSFER OIL CHANGE .
Connect battery and check function of engine, clutch and transaxle.