Brake F, Slotted Nut Disassembly and Assembly and Installation: Notes

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2008 Suzuki Reno, 2008 Suzuki Forenza, 2007 Suzuki Reno, 2007 Suzuki Forenza, and 2006 Suzuki Reno. However, it is still accessible from the selected car via links, so may be relevant.

Tools Required:

DW260-060 Brake F Split Stop Ring Remover

Remove the side shaft. Refer to Side Shaft Disassembly and Assembly .
Take OFF the disc set and the brake F inner disc carrier.

Fig 1: Removing Disc Set
Courtesy of SUZUKI OF AMERICA CORP.

Fig 2: Removing Brake F Inner Disc Carrier
Courtesy of SUZUKI OF AMERICA CORP.
Mount fixture and remove the brake F split stop ring.

Fig 3: Removing Brake F Split Stop Ring
Courtesy of SUZUKI OF AMERICA CORP.
Remove the fixture and take off the cup spring.

Fig 4: Removing Cup Spring
Courtesy of SUZUKI OF AMERICA CORP.
Release the piston F by applying compressed air to the bore.

Fig 5: Releasing Piston F
Courtesy of SUZUKI OF AMERICA CORP.
Remove piston F and bearing plate with spur gear.
Installation should follow the removal procedure in the reverse order.

Fig 6: Removing Piston F And Bearing Plate With Spur Gear
Courtesy of SUZUKI OF AMERICA CORP.