LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2007 >> SX4 Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 64 (Automatic Transmission) >> Repair Instruction >> Side Shaft Disassembly and Assembly
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Side Shaft Disassembly and Assembly

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2008 Suzuki Reno, 2008 Suzuki Forenza, 2007 Suzuki Reno, 2007 Suzuki Forenza, and 2006 Suzuki Reno. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the differential. Refer to Differential Disassembly and Assembly .
  2. Tilt and remove the side shaft.
  3. Installation should follow the removal procedure in the reverse order.

    Removal Notice

    • Don't disassemble the differential to avoid incorrect operation.
      Fig 1: Removing Side Shaft
      G04717372Courtesy of SUZUKI OF AMERICA CORP.
scientia non olet · About LEMON Manuals