LEMON Manuals
: Even more car manuals for everyone: 1960-2025
Home
>>
Mitsubishi
>>
2011
>>
RVR ES
>>
Repair and Diagnosis
>>
Engine Mechanical
>>
Engine Intake System And Exhaust System
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Engine Intake System And Exhaust System
Expand All (for easy ctrl-f)
Collapse All
General Information
Service Specification
Intake And Exhaust Diagnosis
Introduction
Troubleshooting Strategy
Symptom Chart
Symptom Procedures
Inspection Procedure 1: Exhaust Leakage
Diagnosis
Inspection Procedure 2: Abnormal Noise
Diagnosis
Special Tools
Air Cleaner
Removal And Installation
Notes
Installation Service Point
>> A << Mass Airflow Sensor Installation
Intake Manifold
Removal And Installation
Notes
Installation Service Points
>> A << Intake Manifold/Protector Installation
>> B << Intake Manifold Stay Installation
>> C << O-Ring/Manifold Absolute Pressure Sensor/Evaporative Emission Purge Solenoid Installation
Inspection
Intake Manifold Check
Exhaust Manifold
Removal And Installation
Notes
Removal Service Point
<< A >> Exhaust Manifold Nut/Exhaust Manifold Washer/Exhaust Manifold/Exhaust Manifold Lower Cover Removal < AWD >
Installation Service Points
>> A << Exhaust Manifold/Exhaust Manifold Washer/Exhaust Manifold Nut Installation < Fwd >
>> A << Exhaust Manifold Lower Cover/Exhaust Manifold/Exhaust Manifold Washer/Exhaust Manifold Nut Installation < AWD >
>> B << Exhaust Manifold Bracket Installation
Inspection
Exhaust Manifold Check
Exhaust Pipe And Main Muffler
Removal And Installation
< FWD (Except vehicles for California emission regulation) >
< FWD (Vehicles for California emission regulation) >
< AWD >
Removal Service Points
<< A >> Linear Air-Fuel Ratio Sensor/Heated Oxygen Sensor (Rear) Removal
<< B >> Heated Oxygen Sensor (Rear)/Heated Oxygen Sensor (3RD) Removal
<< C >> Rivet Removal
Installation Service Points
>> A << Exhaust Tail Pipe Diffuser Installation
>> B << Rivet Installation
>> C << Heated Oxygen Sensor (Rear)/Heated Oxygen Sensor (3RD) Installation
>> D << Linear Air-Fuel Ratio Sensor/Heated Oxygen Sensor (Rear) Installation