LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Volvo >> 2003 >> S60 Base, 2.4 64 >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Servicing - A/T >> Removal & Installation >> Park/Neutral Position Sensor >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Park/Neutral Position Sensor: Installation

  1. Install the PNP sensor. Tighten the sensor screws lightly. Install the rubber washer, lock washer and the nut on the gear shift linkage rod connection. Tighten the nut. Lock the nut with the lock washer. Adjust the PNP sensor. See PARK NEUTRAL POSITION SENSOR  under ADJUSTMENTS.
  2. Carefully reinstall the cable on the lever pin and studs. See Figure . Ensure that neither the gear selector or lever change position. Install the nuts. Tighten alternately to specification. See TORQUE SPECIFICATIONS  . Install the washer and the retaining clip on the lever. Install the cable in the clip on the connector bracket. Check adjustment. See GEARSHIFT CABLE  under ADJUSTMENTS.
  3. Install the air cleaner housing assembly with the intake pipe and connector. See Figure .
scientia non olet · About LEMON Manuals