Overview - Shift Unit

WARNING: This page is about a different variant/trim than selected.

Fig 1: Exploded View Of Shift Unit

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Bearing Bushing
- For the gearshift shaft
- Removing and installing. Refer to OVERVIEW - TRANSMISSION HOUSING .
Shift Unit
- Consisting of the selector shaft and the gearshift cover
- The components cannot be separated from each other
- Can be removed and installed with the transmission installed. Refer to SHIFT UNIT, REMOVING AND INSTALLING, WITH TRANSMISSION INSTALLED .
O-Ring
- Insert in the groove all around in the gearshift cover
- Install with transmission fluid
- Replace after removing
Cap
- For the transmission ventilation
Bolt
- For the shift unit to the transmission housing
- Tightening specification. Refer to OVERVIEW - TRANSMISSION HOUSING AND GEARSHIFT MECHANISM .
- Replace after removing
Gearshift Shaft Seal
- Replace after removing. Refer to SELECTOR SHAFT SEAL, REPLACING .