Overview - Input Shaft, Output Shafts, Differential And Shift Rods

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

1. Differential
   • Disassembling and Assembling. Refer to DIFFERENTIAL .
2. Seal
   • Replace after removing
   • Quantity: 4
3. Output Shaft
   • Disassembling and Assembling. Refer to OUTPUT SHAFT, DISASSEMBLING AND ASSEMBLING .
4. Reverse Shaft Support
   • Disassembling and Assembling. Refer to REVERSE SHAFT .
5. Reverse Shaft
   • With >>reverse gear assembly<<. Refer to OVERVIEW - REVERSE SHAFT WITH REVERSE GEAR ASSEMBLY .
   • With >>reverse gear locking collar<< (on some transmissions). Refer to OVERVIEW - REVERSE SHAFT, WITH REVERSE GEAR LOCKING COLLAR .
6. Input Shaft
   • Refer to INPUT SHAFT
7. Reverse Gear Shift Fork
   • Only with the >>reverse gear assembly<<
     • Disassembling and Assembling. Refer to SHIFT FORKS, SERVICING .
   • Omitted with the >>reverse gear locking collar<<
     • Reverse gear shift mechanism is then replaced with a gearshift rail. Refer to OVERVIEW - SHIFT FORKS .
8. TORX^® Socket Bolt
   • 25 Nm
9. Shift Mechanism
   • (Shift forks)
   • With the >>reverse gear assembly<<
     • Disassembling and Assembling. Refer to OVERVIEW - SHIFT FORKS WITH REVERSE GEAR ASSEMBLY .
   • With the >>reverse gear locking collar<< (on some transmissions)
     • Disassembling and Assembling. Refer to OVERVIEW - SHIFT FORKS WITH REVERSE GEAR LOCKING COLLAR .
10. Clutch Housing
    • Servicing. Refer to TRANSMISSION HOUSING AND CLUTCH HOUSING .
11. Nut
    • 25 Nm +90°
    • Replace after removing
    • 4 nuts for the bearing mount
12. Flange Shaft with Pressure Spring
    • Removing and installing. Refer to LEFT SEAL, REPLACING .
    • Assembling. Refer to DIFFERENTIAL .
13. Bolt
    • 25 Nm