Shift Mechanism, Removing And Installing: Installing
WARNING: This page is about a different variant/trim than selected.
Install in reverse order of removal. Note the following:
- Do not bend or kink the selector lever cable.
- Do not lubricate the selector lever cable.
- After installing the selector mechanism, the selector lever cable must be checked for ease of movement and adjusted.
-- Install the heat shield under the selector mechanism. Refer to OVERVIEW - HEAT SHIELD .
-- If removed, install the footwell rear channel. Refer to OVERVIEW - AIR ROUTING AND AIR DISTRIBUTION IN VEHICLE INTERIOR .
-- Install the center console. Refer to CENTER CONSOLE, REMOVING AND INSTALLING .
-- Install the selector lever handle. Refer to SELECTOR LEVER HANDLE, REMOVING AND INSTALLING .
-- Adjust the selector lever cable. Refer to SELECTOR LEVER CABLE, CHECKING AND ADJUSTING .
-- Check the selector mechanism. Refer to SHIFT MECHANISM, CHECKING .
-- Install the battery tray and the battery. Refer to BATTERY TRAY, REMOVING AND INSTALLING .