Adjustment Overview

WARNING: This page is about a different variant/trim than selected.

NOTE:

A re-adjustment of the drive axle, output shaft or differential is only required if components, which have a direct influence on transmission adjustment, have been replaced. Note the following table to avoid unnecessary adjustments:

		To be adjusted:
		Input Shaft Refer to INPUT SHAFT, ADJUSTING	Output Shaft. Refer to OUTPUT SHAFT, ADJUSTING .	Differential. Refer to DIFFERENTIAL, ADJUSTING .
Replaced part:	Transmission Housing	x		x
	Clutch Housing	x	x	x
	Input Shaft	x
	Output Shaft		x
	Differential			x
	Output shaft tapered roller bearing	x
	Output shaft tapered roller bearing		x
	Differential tapered roller bearing			x
	4th Gear	x