Engine Mount, Removing And Installing

WARNING: This page is about a different car, the 2020 Volkswagen Arteon and 2019 Volkswagen Arteon. However, it is still accessible from the selected car via links, so may be relevant.

Golf, Passat, Touran, Tiguan and Arteon:

-- Remove the bolt -arrow-, if applicable.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Disconnect the connector -1-.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Free up the hoses -2-.

-- Release the retainers with a screwdriver in direction of -arrow- and move the coolant expansion tank to the side.

All Vehicles:

-- Support the engine in the installation position. Refer to ENGINE, SUPPORTING IN INSTALLATION POSITION .

-- Slightly pretension the engine/transmission assembly with the spindle, do not lift.

-- Remove the bolts -arrows- and engine mount -1-.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Installing

Install in reverse order of removal and note the following:

-- Check the adjustment of the subframe mount. Refer to ASSEMBLY MOUNT, CHECKING ADJUSTMENT .

Tightening Specifications

Refer to OVERVIEW - ASSEMBLY MOUNTS