Knock Sensor 2 -G66-, Removing And Installing
WARNING: This page is about a different car, the 2023 Volkswagen Atlas Cross Sport, 2022 Volkswagen Atlas Cross Sport, 2021 Volkswagen Atlas Cross Sport, and 2020 Volkswagen Atlas Cross Sport. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the coolant thermostat. Refer to COOLANT THERMOSTAT, REMOVING AND INSTALLING .
-- Disconnect the connector -1-.
-- Remove the bolt -2- and then the Knock Sensor 2 -G66-.
Installing:
Install in reverse order of removal while noting the following:
Tightening Specification
- Refer to OVERVIEW - IGNITION SYSTEM