Overview - Bevel Box
- Bolt
- 25 Nm
- Replace after removing
- Heat Shield
- For drive axle
- Nuts
- Tightening specification. Refer to OVERVIEW - DRIVE AXLE .
- Quantity: 2
- Bolt
- 40 Nm
- Heat Shield
- For driveshaft
- Bolt
- 20 Nm
- Bevel Box
- Removing. Refer to BEVEL BOX, REMOVING .
- Installing. Refer to BEVEL BOX, INSTALLING .
- Bolts
- 40 Nm +90°
- Replace after removing
- Quantity: 4
- Transmission Support
- There are different versions. Refer to Vehicle Diagnostic Tester for the allocation.
- Bolts
- Tightening specification and sequence. Refer to Tightening Specification .
- Transmission support to bevel box
- Quantity: 2
- Bolts
- Tightening specification and sequence. Refer to Tightening Specification .
- Transmission support to engine
- Quantity: 2