Torque Support And CROSSMEMBER, Removing And Installing: Installing

WARNING: This page is about a different car, the 2016 Audi Q5, 2015 Audi Q5, and 2014 Audi Q5. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. Note the following:

Tightening specifications:

Refer to OVERVIEW - TORQUE SUPPORT .

NOTE:

Replace any bolts that were tightened with an additional turn.

Remove the subframe bolts one after the other and replace them.

-- Install the crossmember and the subframe, refer to OVERVIEW - SUBFRAME, CROSSBRACE, STABILIZER BAR, COUPLING ROD AND SUBFRAME SHIELD .

-- Fill with coolant, refer to COOLANT, DRAINING AND FILLING => Filling .

-- Install the noise insulations, refer to OVERVIEW - NOISE INSULATION .

-- Install the right front wheel housing liner, refer to WHEEL HOUSING LINER .