Left Engine Mount, Removing And Installing: Installing
WARNING: This page is about a different car, the 2016 Audi Q5, 2015 Audi Q5, and 2014 Audi Q5. However, it is still accessible from the selected car via links, so may be relevant.
Install in reverse order of removal. Note the following:
Tightening specifications:
- Refer to OVERVIEW - SUBFRAME MOUNT .
- Refer to OVERVIEW - TORQUE SUPPORT .
NOTE:
Replace any bolts that were tightened with an additional turn.
-- Tighten the subframe, refer to OVERVIEW - SUBFRAME, CROSSBRACE, STABILIZER BAR, COUPLING ROD AND SUBFRAME SHIELD .
-- Install the A/C compressor, refer to A/C COMPRESSOR, REMOVING AND INSTALLING ON BRACKET, MECHANICALLY-DRIVEN A/C COMPRESSOR, VEHICLES WITH 6-CYLINDER TDI ENGINE .
-- Install the ribbed belt, refer to RIBBED BELT, REMOVING AND INSTALLING .
-- Install the engine cover, refer to ENGINE COVER, REMOVING AND INSTALLING .
-- Install the left front wheel housing liner, refer to WHEEL HOUSING LINER and the noise insulation, refer to OVERVIEW - NOISE INSULATION .