Drive Plate With Overload Protection, Removing And Installing: Installing
WARNING: This page is about a different car, the 2014 Volkswagen Touareg, 2013 Volkswagen Touareg, 2012 Volkswagen Touareg, and 2011 Volkswagen Touareg. However, it is still accessible from the selected car via links, so may be relevant.
-- Position drive plate with overload protection -B- onto drive plate -C-.
-- Install and tighten the bolts -A- hand-tight.
-- Check the drive plate run-out -B-. Refer to DRIVE PLATE WITH OVERLOAD PROTECTION, CHECKING RUN-OUT AND ADJUSTING .
-- Tighten the bolts -A- to 10 Nm.
-- Check the drive plate run-out -B-. Refer to DRIVE PLATE WITH OVERLOAD PROTECTION, CHECKING RUN-OUT AND ADJUSTING .