Transmission System (Controls & Housing - Service Information - 6-Speed Manual - 02Q)
- 34 Controls, Housing
- Bevel Box
- Selector Mechanism
- Selector Mechanism Installation Position
- Overview - Gearshift Knob And Cover
- Overview - Selector Mechanism
- Gearshift Knob, Removing And Installing
- Selector Mechanism, Removing And Installing
- Notes
- Removing
- Installing
- Notes
- With The Selector Relay Lever Removed: Pry The Selector Cable Retainer Out Of The Selector Relay Lever.
- Installing The Selector Cable Retainer On The Relay Lever
- Removing The Cable Retainer From The Gearshift Cable And Selector Cable
- Shift Mechanism, Installing
- Cable Retainer Allocation
- Selector Lever/Relay Lever Installed Position
- Installing The Transmission Shift Lever
- Relay Lever: Lubricate The Following Areas Very Carefully When Installing.
- Gearshift Lever: Lubricate The Following Areas Very Carefully When Installing.
- Tightening Specifications
- Selector Mechanism, Adjusting
- Selector Mechanism, Checking
- Selector Shaft Seal, Replacing
- Transmission, Removing And Installing
- Assembly Mounts
- Front Axle Differential Lock
- Transmission, Transporting
- Transmission, Disassembling And Assembling
- Schematic Overview - Transmission
- Overview - Transmission
- Overview - Transmission Housing And Gearshift Mechanism
- Overview - Shift Unit
- Overview - Input Shaft, Output Shafts, Differential, Gearshift Rods
- Overview - Shift Forks
- Gearshift Shaft Seal, Replacing
- Transmission, Disassembling And Assembling
- Notes
- Transmission, Disassembling
- The Locking Ring -A- Has Been Discontinued Together With The Plastic Cover For The Input Shaft.
- Transmission, Assembling
- The Circlip -1- For The Grooved Ball Bearing/Input Shaft -2- Must Be Re-Examined On Transmissions With Reinforcements:
- Cover Differentiation
- Allocation
- Metal Cover
- Plastic Cover
- AWD Transmission
- Tightening Specifications
- Transmission Housing And Clutch Housing
- Overview - Transmission Housing
- Overview - Clutch Housing
- Transmission Housing, Servicing
- Notes
- Removing The Cover A
- Installing The Cover
- Removing The Locking Elbow For The Gearshift Shaft
- Installed Position: Locking Elbow
- Drive Lock Elbow Arrow For Selector Shaft In Up To Tool Stop.
- Removing The Shift Rod Bearing Bushing
- Installing The Shift Rod Bearing Bushing All The Way Onto The Tool
- Removing The Retaining Sleeve A From The Transmission Housing
- Removing The Retaining Sleeve On A Transmission Not Disassembled Using The 10-15.
- Lock Sleeve Differentiation
- Removing The Reverse Shaft Needle Sleeve From The Transmission Housing
- Installing The Needle Sleeve A Into The Transmission Housing
- Removing The Selector Shaft Bearing Bushing
- Installing The Gearshift Shaft Bearing Bushing A All The Way Onto The Tool
- Removing The Plug 1
- Installing The Plug 1
- Clutch Housing, Servicing
- Securing On Engine And Transmission Holder
- Transmission Fluid
- Manual Transmission Characteristics For Oil Filling
- Transmission Fluid Level, Checking
- Fluid Filler Or Drain Plug Tightening Specification
- Special Tools