Transmission Mount, Installing

NOTE:

Refer to "Transmission Mount Removing" to get a list of the special tools needed. Refer to TRANSMISSION MOUNT, REMOVING .

The Three-Phrase Current Drive -VX54- is held in the installation position with the Engine and Gearbox Jack.

-- Install the transmission mount using the Ladder: VAS5085 and secure (bolts -2 and 1-.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- When all subframe mount bolts are tightened to the tightening specification, remove the Engine and Gearbox Jack and the Transmission Support: 3282 .

-- Install the pendulum support and install with new bolts. Refer to PENDULUM SUPPORT, REMOVING AND INSTALLING .

Fig 1: Identifying Pendulum Support

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Install the Electric Drive Power and Control Electronics - JX1- and bracket. Refer to [For engine(s) EAGA] Electric Drive Power and Control Electronics .