Transmission Mount, Removing

Special tools and workshop equipment required

-- Read and follow the High-Voltage Vehicle Electrical System General Warnings. Refer to SAFETY PRECAUTIONS .

-- Pay attention to the High-Voltage System Danger Classification. Refer to [For engine(s) EAGA] High-Voltage System Danger Classification .

CAUTION:

Extremely dangerous due to high-voltage.

Electrocution can cause death or severe bodily injury.

- Have the high-voltage system de-energized by qualified personnel.

-- Disable the high-voltage system. Refer to [For engine(s) EAGA] High-Voltage Battery Unit .

-- Perform a visual inspection of the high-voltage components in the work area. Refer to [For engine(s) EAGA] Safety Precautions .

-- Remove the Electric Drive Power and Control Electronics - JX1-. Refer to [For engine(s) EAGA] Electric Drive Power and Control Electronics .

-- Remove the pendulum support. Refer to PENDULUM SUPPORT, REMOVING AND INSTALLING .

Fig 1: Identifying Pendulum Support

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Secure the Engine and Gearbox Jack under the Three-Phrase Current Drive - VX54-. Refer to Three-Phrase Current Drive -VX54- CROSSMEMBER, REMOVING .

-- Remove the bolts -1- and -2- from above using the Ladder: VAS5085 (the illustration shows a different bearing).

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the transmission mount.