Motor Mount, Installing

NOTE:

Refer to "Motor Mount Removing" to get a list of the special tools needed. Refer to MOTOR MOUNT, REMOVING .

The Three-Phrase Current Drive -VX54- is held in the installation position with the Engine and Gearbox Jack.

-- Install the motor mount using the Ladder: VAS5085 and secure (bolts -2 and 1-.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- When all subframe mount bolts are tightened to the tightening specification, remove the Engine and Gearbox Jack and the Transmission Support: 3282 .

-- Install the pendulum support and install with new bolts. Refer to PENDULUM SUPPORT, REMOVING AND INSTALLING .

Fig 1: Identifying Pendulum Support

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Install the High-Voltage Battery Charger 1 -AX4- with the bracket. Refer to [For engine(s) EAGA] Component Location Overview - High-Voltage Components .