Upper Intake Manifold: Installing

WARNING: This page is about a different car, the 2012 Audi Q5, 2011 Audi Q5, 2010 Audi Q5, and 2009 Audi Q5. However, it is still accessible from the selected car via links, so may be relevant.

Installation is in reverse order of removal, note the following:

Tightening Specifications. Refer to UPPER INTAKE MANIFOLD OVERVIEW .

NOTE:

Replace seals and O-rings.

During installation, all cable ties must be re-installed at the same location.

Secure all hose connections using hose clamps appropriate for the model type.