Manual Transmission System (Clutch - Service Information)

• Clutch Mechanism
  • Notes
  • Overview - Pedal Assembly
    • Notes
    • Mounting Bracket With Damper -Arrow-
  • Overview - Clutch Hydraulics
    • Notes
    • Overview - Clutch Hydraulics
      • Notes
      • Seal & Plastic Hose For Clutch Hydraulic
    • Overview - Clutch Hydraulics, RHD
  • Overview - Clutch Release Mechanism
  • Clutch Pedal, Removing And Installing
    • Notes
    • Removing
    • Installing
    • Tightening Specifications
  • Over-Center Spring, Removing And Installing
    • Notes
    • Removing
    • Installing
    • Tightening Specifications
  • Mounting Bracket, Removing And Installing
    • Notes
    • Removing
    • Installing
    • Tightening Specifications
  • Clutch Master Cylinder, Removing And Installing
    • Notes
    • Removing
    • Installing
  • Clutch Slave Cylinder, Removing And Installing
    • Notes
    • Removing
    • Installing
    • Tightening Specifications
  • Clutch Mechanism, Bleeding
    • Notes
    • Tightening Specifications
  • Clutch Master And Clutch Slave Cylinder, Checking
  • Clutch Position Sensor - G476-, Removing And Installing
    • Notes
    • Removing
    • Installing
  • Clutch Release Mechanism, Servicing
    • Notes
    • Removing And Installing The Release Bearing
• Clutch
  • Notes
  • Clutch Manufacturers, Differentiating
  • Overview - Clutch
    • Notes
    • Overview - Clutch, With Dual Mass Flywheel, SACHS
    • OVERVIEW - CLUTCH, WITH DUAL MASS FLYWHEEL, LuK
    • Overview - Clutch, With Single Flywheel
  • Clutch, Removing And Installing
    • Notes
    • Clutch, Removing And Installing, With Dual Mass Flywheel, SACHS
      • Notes
      • "Transmission Side" Label Faces The Transmission.
      • Check The Ends Of The Diaphragm Spring
      • Checking The Spring Connections And Rivet Connections
      • Tightening Specifications
    • Clutch, Removing And Installing, With Dual Mass Flywheel, LUK
      • Notes
      • Removing
      • Installing
        • Notes
        • Check The Ends Of The Diaphragm Spring
        • Checking The Spring Connections And Rivet Connections
        • Only Check Position Of Adjustment Mechanism With New Pressure Plates
        • Install The -3067-.
      • Tightening Specifications
    • Clutch, Removing And Installing, With Single Flywheel
      • Notes
      • Removing
      • Installing
      • Check The Ends Of The Diaphragm Spring
      • Checking The Spring Connections And Rivet Connections
      • Checking The Pull-Springs And Rivet Connection
      • Checking The Metal Ring
      • Tightening Specifications
• Special Tools