Battery, Transmitter And Receiver Unit, Fuse And Wiring Harness, Overview

Fig 1: Battery, Transmitter/Receiver Unit - Fuse And Wiring Harness, Overview

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

1. Positive Connection
   • Red wire with suitable connection
2. To Terminal 15a
   • Connection to terminal 15a, refer to => appropriate System Wiring Diagram Information
   • Ensure wire is protected by fuse
   • Fuse: maximum 15 A
3. Antenna Ground
   • Make sure the ground is connected to the body properly
   • Antenna location must be treated with suitable corrosion protection
4. Transmitting/Receiving Antenna
   • Installed locations, refer to TRANSMITTED OUTPUT, ANTENNA INSTALLATION LOCATIONS 
5. Shielded Antenna Wire
   • Wire with coaxial connector
6. Telephone Or Two-Way Radio Transmitter/Receiver Unit
7. Wiring Harness
   • Voltage supply positive via red wire, 2.5 mm ² cross section
   • Voltage supply negative via brown wire, 2.5 mm ² cross section
   • If necessary, wire to terminal 15a via black wire 1.5 mm ² cross section
8. Fuse Holder
   • Attach next to the Battery -A-
9. To the Starter -B-
10. Battery -A-
11. Negative Wire
12. Body Ground