LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Volkswagen >> 2010 >> Tiguan SE 4Motion >> Repair and Diagnosis (Single Page) >> General Information >> Reset Procedures >> Tire Pressure Monitor Systems >> TPMS Reset Procedures >> Tire Pressure Monitor System Reset >> Basic Setting
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Basic Setting

NOTE: This procedure cannot be performed unless vehicle is equipped with a SET button. SET button is located in the center console.
NOTE: Use this reset procedure for Indirect TPM systems.
  1. Set the tire pressure of all wheels to specified pressure.
  2. With vehicle stopped and parking brake applied, turn ignition switch to ON position.
  3. Press SET button (located in the center console) and hold until an audio signal is heard. The signal confirms basic setting.