Selector Lever Cable, Checking

Short Description

To check the selector lever cable for ease of movement, the selector lever cable must be removed from the transmission and the removed end must be set aside so that it does not make contact anywhere.

Then the selector lever is moved and finally the cable is reinstalled at transmission.

After that, selector lever cable must be adjusted. Refer to SELECTOR LEVER CABLE, ADJUSTING .

Do not grease the cable connections.

Checking

-- Place the selector lever in the "P" position.

-- Remove the cable from the lever on the transmission.

-- Move the selector lever from "P" to "S" and back to "P" several times.

• Selector lever must have freedom of movement while doing so.

-- Reinstall the cable with new lock washers and loosened adjustment bolt.

-- Adjust the cable, Refer to SELECTOR LEVER CABLE, ADJUSTING .