SELECTABLE Diagnostic Modes Under Address Word 33 - OBD
NOTE:
The conditions required for selecting the desired diagnostic mode are listed in the following table:
| Diagnostic mode | Prerequisite: | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Selectable diagnostic modes under address word 33 - OBD |
|
|
|
||||||
| Mode 1: | Check measured values | DIAGNOSTIC MODE 01 - READ CURRENT SYSTEM DATA | Yes | Yes | Yes | ||||
| Mode 2: | Check operating conditions | DIAGNOSTIC MODE 02 - READ OPERATING CONDITIONS | Yes | Yes | Yes | ||||
| Mode 3: | Check DTC Memory | DIAGNOSTIC MODE 03 - READ DTC MEMORY | Yes(1) | Yes | Yes | ||||
| Mode 4: | Reset/erase diagnostic data | DIAGNOSTIC MODE 04 - ERASE DTC MEMORY | Yes | Yes | Yes | ||||
| Mode 5: | Check output of oxygen sensor signals | --- | --- | --- | --- | ||||
| Mode 6: | Check test results of components that are not continuously monitored(2) | DIAGNOSTIC MODE 06 - READ TEST RESULTS FOR SPECIFIC DIAGNOSTIC FUNCTIONS | No | Yes | Yes | ||||
|
|||||||||
NOTE:
Bank 1 = Cylinder bank 1, in direction of travel, right.
Bank 2 = Cylinder bank 2, in direction of travel, left.
| Diagnostic mode | Prerequisite: | ||||||
|---|---|---|---|---|---|---|---|
| Selectable diagnostic modes under address word 33 - OBD |
|
|
|
||||
| Mode 7: | Check test results of components that are continuously monitored | DIAGNOSTIC MODE 07 - READ FAULTS DETECTED DURING THE CURRENT OR LAST DRIVING CYCLE | Yes(1) | Yes | Yes | ||
| Mode 8: | Tank leak test | --- | --- | --- | --- | ||
| Mode 9: | Vehicle information | DIAGNOSTIC MODE 09 - READ VEHICLE INFORMATION | Yes | No | No | ||
|
|||||||