Remote Control Key Transmitter, Programming To A Driver Seat Memory Position Button (GROUP 57, NO. 03-04)

Publication date: 2003-10-14
Reference number: GROUP 57, NO. 03-04

REMOTE CONTROL KEY TRANSMITTER, PROGRAMMING TO A DRIVER SEAT MEMORY POSITION BUTTON

TECHNICAL SERVICE BULLETIN

Reference Number(s): GROUP 57, NO. 03-04, Date of Issue: October 14, 2003

VOLKSWAGEN:	Touareg 2004
GROUP:	57 - Doors - Front

Remote Control Key Transmitter, Programming To A Driver Seat Memory Position Button

Remote control key transmitter is not programmed to a driver's seat memory button.

To assign a remote control key transmitter to a memory position:

Switch ignition ON.
Set all applicable driver programmable features (seat position, seat belt, mirrors, steering column position).
Press and release the "Set" button on the seat.
Press and release Memory button position "1", "2" or "3".
- Instrument cluster emits a signal (dinging sound).
Switch ignition OFF and pull key out of ignition.
- You now have 10 seconds to press the unlock button on the remote transmitter.
Press the "unlock" button on the remote transmitter.
- The instrument cluster emits a signal (dinging sound).
- Features are now programmed to that remote transmitter.
- If seat is moved after removing key and before pressing the "unlock button" to assign the remote transmitter to a memory position, the store function will be aborted.

The result of successful programming is as follows:

Without convenient entry function or if convenient entry function is disabled:

After unlocking the vehicle with the programmed remote transmitter, when the driver's door is opened:

The applicable programmed function which includes driver's seat, seat belt, mirrors and steering column settings move to the stored positions assigned to that remote transmitter.
With convenient entry function enabled:

After unlocking the vehicle with the programmed remote transmitter, when the driver's door is opened:
Outside mirrors and safety belt height settings move to stored positions.
After the key is inserted into the ignition switch:
The applicable programmed function which include driver's seat and steering column settings will move to stored positions assigned to that remote transmitter.
To delete programmed memory position:
- Perform procedure again with new settings for the applicable driver programmable features (seat position, seat belt, mirrors and steering column position).
New settings will overwrite old settings for that memory position.