Repair and Diagnosis (Single Page)
You are viewing the full "tree" of links on one page. This can load slowly, but is easier to search. The same page can appear multiple times under a different folder, that is why the page is so large.View "split tree" where inner folders are split out. where inner links are on separate pages.
Quick Lookups
Common Specs & Procedures
Electrical Component Locations
Fluids
Technical Bulletins
Tire Fitment
Wiring Diagrams- OEM Connector End Views
- Connector End Views
- Engine Control Module (ECM) Connector Side Connector End View (J623)
- Engine Control Module (ECM) 2 Connector Side Connector End View (J624)
- Tire Pressure Monitoring Control Module Connector Side Connector End View (J502)
- Battery Monitoring Control Module Connector Side Connector End View (J367)
- Control Module For Distance Regulation Connector Side Connector End View (J428)
- Access/Start Control Module Connector Side Connector End View (J518)
- Digital Sound System Control Module Connector Side Connector End View (J525)
- Memory Seat Control Module Connector End Views (J136, T26s*)
- Connector End Views
- Supplemental Restraint System Wiring Diagrams
- Using lemon2025'S System Wiring Diagrams
- OEM Connector End Views
- Accessories & Equipment
- Anti-Theft Systems
- Body Exterior
- 50 Body - Front
- Lock carrier
- Tools
- Electrical/electronic components and locations
- Lock carrier service position, assembly overview
- Service position
- Lock carrier with attachments, assembly overview
- Lock carrier with attachments, removing and installing
- Lock carrier attachments, assembly overview
- Installation note for longmember
- Installation notes for Right Distance Regulation Sensor G259
- Right Distance Regulation Sensor G259, removing and installing
- Fenders
- Noise insulation
- Lock carrier
- 55 Hood, Lids
- Contact corrosion!
- Hood
- Locking and unlocking components of hood
- Rear lid
- Tools
- Aluminum hinge and hydraulic unit, assembly overview
- Hydraulic unit, removing and installing
- Steel hinge, assembly overview
- Gas-filled strut, removing
- Releasing gas from strut
- Rear lid, adjusting
- Basic setting of rear lid
- End plate, adjusting with lock cover removed
- End plate, adjusting with lock cover installed
- Damper, adjusting
- Lock parts with servo lid opening
- Lock parts with basic lid opening
- Fuel flap unit
- 57 Front doors, Central locking system
- Contact corrosion!
- Front door
- Tools
- Front door, assembly overview
- Door, removing and installing
- Door, adjusting
- Striker pin, adjusting
- Door handle and door lock, assembly overview
- Lock cylinder housing, removing and installing
- Door handle, removing and installing
- Door handle with cable routing (Keyless entry)
- Door lock, removing and installing
- Door Closing Assist Motor V278, assembly overview
- Door seals
- Inner door seal, removing and installing
- Outer door seal, removing and installing
- Door insulation, component location
- Door insulation, installing and removing
- Adaptation of ignition keys with radio-frequency remote control
- Batteries for the main key (foldable) with radio-frequency remote control, removing and installing
- Batteries for main key (foldable) with radio-frequency remote control (01.04 ), assembly overview
- Batteries for main key (foldable) with radio-frequency remote control (01.04 ), removing and installing
- 58 Rear doors, Window regulators
- Contact corrosion!
- Rear door
- Tools
- Rear door, assembly overview
- Door, removing and installing
- Door, adjusting
- Striker pin, adjusting
- Door handle and door lock, assembly overview
- Door handle, removing and installing
- Door handle with cable routing (Keyless entry)
- Door lock, removing and installing
- Door Closing Assist Motor V278, assembly overview
- Door seals
- Inner door seal, removing and installing
- Outer door seal, removing and installing
- Door insulation, component location
- Door insulation, installing
- 60 Sunroof
- Sliding/tilting sunroof with glass panel
- Tools
- Function
- Assembly overview
- Glass panel for sliding/tilting sunroof, removing
- Glass panel for sliding/tilting sunroof, installing
- Glass panel for sliding/tilting sunroof, adjusting (height adjustment)
- Parallel movement of glass panel, checking
- Parallel movement of glass panel, adjusting
- Panel seal, replacing
- Wind deflector, removing and installing
- Wind deflector, adjusting
- Sunroof shade, removing and installing
- Parallel movement of sunroof shade, adjusting
- Sunroof drive motor, removing and installing
- Drive motor for sliding/tilting sunroof, adjusting (zero position)
- Drive motor for sunroof shade, removing and installing
- Drive motor for wind deflector, removing and installing
- Automatic rotary switch for sunroof, removing and installing
- Sunroof shade switches, removing
- Assembly unit, removing and installing
- Operation without electricity
- Water drain hoses, cleaning
- Sunroof, adapting components
- Sunroof, coding
- Sliding/tilting sunroof with solar panel
- Tools
- Function
- Assembly overview
- Solar panel for sliding/tilting sunroof, removing
- Solar panel for sliding/tilting sunroof, installing
- Solar panel for sliding/tilting sunroof, adjusting (height adjustment)
- Parallel movement of solar panel, checking
- Parallel movement of solar panel, adjusting
- Panel seal, replacing
- Wind deflector, removing and installing
- Wind deflector, adjusting
- Trim for solar panel, removing and installing
- Sunroof drive motor, removing and installing
- Drive motor for sliding/tilting sunroof, adjusting (zero position)
- Drive motor for wind deflector, removing and installing
- Automatic rotary switch for sunroof, removing and installing
- DC converter, removing and installing
- Solar contact, removing
- Assembly unit, removing and installing
- Operation without electricity
- Water drain hoses, cleaning
- Sunroof, adapting components
- Sunroof, coding
- Sliding/tilting sunroof with glass panel
- 63 Bumpers
- Front bumper
- Bumper cover, repairing
- Tools
- Bumper cover, assembly overview
- Bumper cover, removing and installing
- Front bumper attachments
- Front bumper, substructure
- Installation notes for Right Distance Regulation Sensor G259
- Automatic distance regulation (ADR) sensor, removing and installing
- Cover piece, removing and installing
- Rear bumper
- Front bumper
- 64 Glass, Windows
- Flush bonded windows
- Tools
- Materials
- Windshield, repairing
- Windshield, assembly overview
- Plenum chamber cover, removing and installing
- Windshield, removing
- Windshield, installing
- New windshield with viewing window for VIN for vehicles without VIN, preparing
- Rear window, assembly overview
- Undamaged rear window, removing
- Rear window, installing
- Preparing old undamaged window for glazing
- Preparing new window for glazing
- Preparing window flange for glazing
- Installation notes
- Minimum curing time
- Repairing paint damage
- Cleaning when soiled by adhesive sealing material
- Front door window
- Rear door window
- Flush bonded windows
- 66 Exterior equipment
- Wheel housing liner, removing and installing
- Rearview mirror
- Radiator grille
- Roof moldings
- Protective moldings
- Sill panel trim
- 50 Body - Front
- Electrical Equipment
- 27 - Battery, Starter, Generator, Cruise control
- Battery
- Battery, checking
- Battery, charging
- Battery, disconnecting and reconnecting
- Battery, disconnecting and reconnecting
- Battery (vehicles with two-battery concept), disconnecting and connecting
- Notes
- Battery disconnecting and reconnecting sequence
- Disconnecting battery in luggage compartment, right
- Disconnecting second battery in luggage compartment, left
- Batteries, reconnecting sequence
- Connecting second battery in luggage compartment, left
- Connecting battery in luggage compartment, right
- Work steps required after reconnecting battery
- Battery - vehicles with electric closing assist, disconnecting and connecting
- Battery, removing and installing
- Battery cut-out relay J7 , removing and installing
- Battery cut-off
- Battery monitoring control module J367 , removing and installing
- Tightening Torques: Battery
- Starter
- Tightening Torques: Starter
- Generator, removing and installing
- Generator, removing and installing
- Generator features
- Ribbed belt, checking
- Generator (8-cyl. Gasoline engine), assembly overview
- Generator (8-cyl. gasoline engine), removing and installing
- Generator, 12-cyl. Gasoline engine
- Generator (12-cyl. gasoline engine), removing and installing
- Generator ribbed belt pulley, removing and installing
- Tightening Torques: Generator
- Adaptive Cruise Control (ACC)
- Cruise control system (CCS), removing and installing
- 90 - Instruments
- Instrument cluster
- Service interval indicator
- 92 - Windshield wiper and washer system
- Front windshield wiper system
- Front windshield wiper system
- General information
- Front windshield wiper system, removing and installing
- Notes
- Front windshield wiper system, removing
- Wiper arms, removing
- Plenum chamber cover, removing
- Cowl, removing
- Drivers side wiper frame, installing
- Left wiper frame, removing
- Removing wiper motor from left wiper frame
- Installing wiper motor into left wiper frame
- Right wiper frame, removing
- Removing wiper motor from wiper frame
- Installing wiper motor into right wiper frame
- Rest position of windshield wiper blades, adjusting
- Aero wipers, removing and installing
- Rain sensor G213 , removing and installing
- Windshield washer system
- Windshield washer system
- Front windshield washer system - assembly overview
- Washer fluid reservoir, removing and installing
- Windshield Washer Pump V5 , removing and installing
- Windshield Washer Fluid Level Sensor G33 , removing and installing
- Washer nozzles for front windshield washer system, removing and installing
- Spray jets for front windshield washer system, checking
- Headlamp cleaning system
- Washer Hose Couplings
- Washer hoses, repairing
- Tightening Torques: Windshield wiper and washer system
- 94 - Lights, Switches - Exterior
- Headlight with one gas-discharge bulb
- Headlight with one gas-discharge bulb
- Main headlamp with one gas-discharge bulb, assembly overview
- Main headlamp, removing and installing
- Correcting installation position of headlamp
- Bulbs for main headlamps with one gas discharge bulb, replacing
- Automatic headlamp range control adjusting motor, removing and installing
- Removing and installing Headlamp Range Control Module
- Level control system sensor, removing and installing
- Headlight range control module, coding
- Main headlamp, adjusting
- Main headlamp with two gas-discharge bulbs
- Main headlamp with two gas-discharge bulbs
- Main headlamp with two gas-discharge bulbs, assembly overview
- Main headlamp, removing and installing
- Correcting installation position of headlamp
- Bulbs for main headlamps with two gas discharge bulbs, replacing
- Automatic headlamp range control adjusting motor, removing and installing
- Removing and installing Headlamp Range Control Module
- HID lamp high beam control module, removing and installing
- Level control system sensor, removing and installing
- Headlight range control module, coding
- Main headlamp, adjusting
- Fog lamps
- Mirror turn signals and entry lights in exterior mirror
- Taillamps
- Taillamps
- Taillamp assembly in side panel - assembly overview
- Taillight in rear lid, assembly overview
- Taillamp assembly in side panel, removing and installing
- Tail light assembly in luggage compartment lid, removing and installing
- Back-up light, removing and installing
- Gap dimensions of taillamp assemblies
- Rear light function, checking
- License Plate Lights
- High-Mount Brake Light
- Steering column switch
- Access/start authorization
- Access/start authorization
- Emergency release
- Access/Start Authorization Switch E415
- Access/Start Authorization Button E408
- Access/Start Control Module J518
- Access/start authorization antennas, assembly overview
- Access/start authorization antennas, removing and installing
- Notes
- Drivers Access/Start Authorization Antenna R134 , removing and installing
- Front Passengers Access/Start Authorization Antenna R135 , removing and installing
- Access/Start Authorization Antenna (in rear bumper) R136
- Luggage Compartment Access/Start Authorization Antenna R137 , removing and installing
- Interior Access/Start Authorization Antenna 1 R138 , removing and installing
- Interior Access/Start Authorization Antenna 2 R139 , removing and installing
- Interior Access/Start Authorization Antenna 3 R154 , removing and installing
- Antenna for Access/Start Authorization, checking
- Notes
- Checking Drivers Access/Start Authorization Antenna R134
- Checking Front Passengers Access/Start Authorization Antenna R135
- Checking Access/Start Authorization Antenna (in rear bumper) R136
- Checking Luggage Compartment Access/Start Authorization Antenna R137
- Checking Interior Access/Start Authorization Antenna 1 R138
- Checking Interior Access/Start Authorization Antenna 2 R139
- Checking Interior Access/Start Authorization Antenna 3 R154
- Antenna for Access/Start Authorization, tightening torques
- Parking aid
- Parking aid
- General information
- Parking assistance system - assembly overview
- Parking Aid Control Module J446 , removing and installing
- Front parking aid sensor, removing and installing
- Rear parking aid sensor, removing and installing
- Front parking aid display, removing and installing
- Rear parking aid display, removing
- Front side marker lamp, removing and installing
- Front windshield wiper system
- 96 - Lights, Switches - Interior, Anti-theft
- Interior lights and switches
- Lights and switches in the instrument panel
- Lights and switches in the instrument panel
- Light Switch E1 , removing and installing
- Instrument panel light dimmer switch E20 and trip odometer reset switch E123 , removing and installing
- Rear window shade switch E149 and parking aid button E266 , removing and installing
- Glove Compartment Light W6 , removing and installing
- Glove Compartment Lamp Switch E26 , removing and installing
- Steering Column Adjustment Switch E167 , removing and installing
- Footwell lights , removing and installing
- Front Doors - Lights and Switches
- Front Doors - Lights and Switches
- Central switch for window regulator, in drivers door E189 , switch for rear lid remote control lock E233 , and fuel tank lid unlock button E319 , removing and installing
- Right front window switch E41 , removing and installing
- Front Interior Locking Button E308 and E309 , removing and installing
- Front Door Opener Illumination L108 and L109 , removing and installing
- Front door contact switch, removing and installing
- Front Entry Light W31 and W32 , removing and installing
- Door Warning Light W30 and W36 , removing and installing
- Rear Doors - Lights and Switches
- Rear Doors - Lights and Switches
- Rear Window Switch E52 and E54 , removing and installing
- Rear Interior Locking Button E310 and E311 , removing and installing
- Rear Door Opener Illumination L110 and L111 , removing and installing
- Rear door contact switch, removing and installing
- Rear Entry Light W33 and W34 , removing and installing
- Rear Door Warning Light W37 and W38 , removing and installing
- Luggage Compartment - Lights and Switches
- Headliner - Lights and Switches
- Headliner - Lights and Switches
- Front interior light W1 , removing and installing
- Map/Reading Light W19 and W13 , removing and installing
- Sunroof Switch E8 , removing and installing
- Rear interior and reading lights, removing and installing
- Rear Interior Lamp Button E327 and E329 , removing and installing
- Removing and installing garage door opener
- Switch panel in roof module, removing and installing
- Center Console - Lights and Switches
- Center Console - Lights and Switches
- Mirror adjustment switch E43 with mirror selector switch E48 , removing and installing
- Access/start authorization button E408 , removing and installing
- Switch panel for front seat heating/ventilation with buttons for dampening, ESP, and level control in the center console, removing and installing
- Switch panel for rear seat position and heating/ventilation memory (4-seater), removing and installing
- Switch panel for rear seat adjustment (4-seater), removing and installing
- Switch panel for rear seat lumbar adjustment (5-seater), removing and installing
- Other electrical components
- 97 - Wiring
- Vehicle Diagnostic, Testing and Information Systems
- Fuse holder, relay panel, E-boxes and control modules, removing and installing
- Fuse holder, relay panel, E-boxes and control modules, removing and installing
- Fuse holder under the instrument panel, left, removing and installing
- Auxiliary fuse box in luggage compartment, left, removing and installing
- Thermal fuse box on driver side, removing and installing
- E-box in luggage compartment, left, removing and installing
- E-box in plenum chamber, right, removing and installing
- Relay carrier in right front footwell, removing and installing
- Vehicle electrical system control module, replacing
- Vehicle electrical system control module, removing and installing
- Roof electronics control module, removing and installing
- Wiring Harnesses and Connectors, Repairing
- 27 - Battery, Starter, Generator, Cruise control
- Body Exterior
- Cruise Control Systems
- Electrical Equipment
- 27 - Battery, Starter, Generator, Cruise control
- Battery
- Battery, checking
- Battery, charging
- Battery, disconnecting and reconnecting
- Battery, disconnecting and reconnecting
- Battery (vehicles with two-battery concept), disconnecting and connecting
- Notes
- Battery disconnecting and reconnecting sequence
- Disconnecting battery in luggage compartment, right
- Disconnecting second battery in luggage compartment, left
- Batteries, reconnecting sequence
- Connecting second battery in luggage compartment, left
- Connecting battery in luggage compartment, right
- Work steps required after reconnecting battery
- Battery - vehicles with electric closing assist, disconnecting and connecting
- Battery, removing and installing
- Battery cut-out relay J7 , removing and installing
- Battery cut-off
- Battery monitoring control module J367 , removing and installing
- Tightening Torques: Battery
- Starter
- Tightening Torques: Starter
- Generator, removing and installing
- Generator, removing and installing
- Generator features
- Ribbed belt, checking
- Generator (8-cyl. Gasoline engine), assembly overview
- Generator (8-cyl. gasoline engine), removing and installing
- Generator, 12-cyl. Gasoline engine
- Generator (12-cyl. gasoline engine), removing and installing
- Generator ribbed belt pulley, removing and installing
- Tightening Torques: Generator
- Adaptive Cruise Control (ACC)
- Cruise control system (CCS), removing and installing
- 90 - Instruments
- Instrument cluster
- Service interval indicator
- 92 - Windshield wiper and washer system
- Front windshield wiper system
- Front windshield wiper system
- General information
- Front windshield wiper system, removing and installing
- Notes
- Front windshield wiper system, removing
- Wiper arms, removing
- Plenum chamber cover, removing
- Cowl, removing
- Drivers side wiper frame, installing
- Left wiper frame, removing
- Removing wiper motor from left wiper frame
- Installing wiper motor into left wiper frame
- Right wiper frame, removing
- Removing wiper motor from wiper frame
- Installing wiper motor into right wiper frame
- Rest position of windshield wiper blades, adjusting
- Aero wipers, removing and installing
- Rain sensor G213 , removing and installing
- Windshield washer system
- Windshield washer system
- Front windshield washer system - assembly overview
- Washer fluid reservoir, removing and installing
- Windshield Washer Pump V5 , removing and installing
- Windshield Washer Fluid Level Sensor G33 , removing and installing
- Washer nozzles for front windshield washer system, removing and installing
- Spray jets for front windshield washer system, checking
- Headlamp cleaning system
- Washer Hose Couplings
- Washer hoses, repairing
- Tightening Torques: Windshield wiper and washer system
- 94 - Lights, Switches - Exterior
- Headlight with one gas-discharge bulb
- Headlight with one gas-discharge bulb
- Main headlamp with one gas-discharge bulb, assembly overview
- Main headlamp, removing and installing
- Correcting installation position of headlamp
- Bulbs for main headlamps with one gas discharge bulb, replacing
- Automatic headlamp range control adjusting motor, removing and installing
- Removing and installing Headlamp Range Control Module
- Level control system sensor, removing and installing
- Headlight range control module, coding
- Main headlamp, adjusting
- Main headlamp with two gas-discharge bulbs
- Main headlamp with two gas-discharge bulbs
- Main headlamp with two gas-discharge bulbs, assembly overview
- Main headlamp, removing and installing
- Correcting installation position of headlamp
- Bulbs for main headlamps with two gas discharge bulbs, replacing
- Automatic headlamp range control adjusting motor, removing and installing
- Removing and installing Headlamp Range Control Module
- HID lamp high beam control module, removing and installing
- Level control system sensor, removing and installing
- Headlight range control module, coding
- Main headlamp, adjusting
- Fog lamps
- Mirror turn signals and entry lights in exterior mirror
- Taillamps
- Taillamps
- Taillamp assembly in side panel - assembly overview
- Taillight in rear lid, assembly overview
- Taillamp assembly in side panel, removing and installing
- Tail light assembly in luggage compartment lid, removing and installing
- Back-up light, removing and installing
- Gap dimensions of taillamp assemblies
- Rear light function, checking
- License Plate Lights
- High-Mount Brake Light
- Steering column switch
- Access/start authorization
- Access/start authorization
- Emergency release
- Access/Start Authorization Switch E415
- Access/Start Authorization Button E408
- Access/Start Control Module J518
- Access/start authorization antennas, assembly overview
- Access/start authorization antennas, removing and installing
- Notes
- Drivers Access/Start Authorization Antenna R134 , removing and installing
- Front Passengers Access/Start Authorization Antenna R135 , removing and installing
- Access/Start Authorization Antenna (in rear bumper) R136
- Luggage Compartment Access/Start Authorization Antenna R137 , removing and installing
- Interior Access/Start Authorization Antenna 1 R138 , removing and installing
- Interior Access/Start Authorization Antenna 2 R139 , removing and installing
- Interior Access/Start Authorization Antenna 3 R154 , removing and installing
- Antenna for Access/Start Authorization, checking
- Notes
- Checking Drivers Access/Start Authorization Antenna R134
- Checking Front Passengers Access/Start Authorization Antenna R135
- Checking Access/Start Authorization Antenna (in rear bumper) R136
- Checking Luggage Compartment Access/Start Authorization Antenna R137
- Checking Interior Access/Start Authorization Antenna 1 R138
- Checking Interior Access/Start Authorization Antenna 2 R139
- Checking Interior Access/Start Authorization Antenna 3 R154
- Antenna for Access/Start Authorization, tightening torques
- Parking aid
- Parking aid
- General information
- Parking assistance system - assembly overview
- Parking Aid Control Module J446 , removing and installing
- Front parking aid sensor, removing and installing
- Rear parking aid sensor, removing and installing
- Front parking aid display, removing and installing
- Rear parking aid display, removing
- Front side marker lamp, removing and installing
- Front windshield wiper system
- 96 - Lights, Switches - Interior, Anti-theft
- Interior lights and switches
- Lights and switches in the instrument panel
- Lights and switches in the instrument panel
- Light Switch E1 , removing and installing
- Instrument panel light dimmer switch E20 and trip odometer reset switch E123 , removing and installing
- Rear window shade switch E149 and parking aid button E266 , removing and installing
- Glove Compartment Light W6 , removing and installing
- Glove Compartment Lamp Switch E26 , removing and installing
- Steering Column Adjustment Switch E167 , removing and installing
- Footwell lights , removing and installing
- Front Doors - Lights and Switches
- Front Doors - Lights and Switches
- Central switch for window regulator, in drivers door E189 , switch for rear lid remote control lock E233 , and fuel tank lid unlock button E319 , removing and installing
- Right front window switch E41 , removing and installing
- Front Interior Locking Button E308 and E309 , removing and installing
- Front Door Opener Illumination L108 and L109 , removing and installing
- Front door contact switch, removing and installing
- Front Entry Light W31 and W32 , removing and installing
- Door Warning Light W30 and W36 , removing and installing
- Rear Doors - Lights and Switches
- Rear Doors - Lights and Switches
- Rear Window Switch E52 and E54 , removing and installing
- Rear Interior Locking Button E310 and E311 , removing and installing
- Rear Door Opener Illumination L110 and L111 , removing and installing
- Rear door contact switch, removing and installing
- Rear Entry Light W33 and W34 , removing and installing
- Rear Door Warning Light W37 and W38 , removing and installing
- Luggage Compartment - Lights and Switches
- Headliner - Lights and Switches
- Headliner - Lights and Switches
- Front interior light W1 , removing and installing
- Map/Reading Light W19 and W13 , removing and installing
- Sunroof Switch E8 , removing and installing
- Rear interior and reading lights, removing and installing
- Rear Interior Lamp Button E327 and E329 , removing and installing
- Removing and installing garage door opener
- Switch panel in roof module, removing and installing
- Center Console - Lights and Switches
- Center Console - Lights and Switches
- Mirror adjustment switch E43 with mirror selector switch E48 , removing and installing
- Access/start authorization button E408 , removing and installing
- Switch panel for front seat heating/ventilation with buttons for dampening, ESP, and level control in the center console, removing and installing
- Switch panel for rear seat position and heating/ventilation memory (4-seater), removing and installing
- Switch panel for rear seat adjustment (4-seater), removing and installing
- Switch panel for rear seat lumbar adjustment (5-seater), removing and installing
- Other electrical components
- 97 - Wiring
- Vehicle Diagnostic, Testing and Information Systems
- Fuse holder, relay panel, E-boxes and control modules, removing and installing
- Fuse holder, relay panel, E-boxes and control modules, removing and installing
- Fuse holder under the instrument panel, left, removing and installing
- Auxiliary fuse box in luggage compartment, left, removing and installing
- Thermal fuse box on driver side, removing and installing
- E-box in luggage compartment, left, removing and installing
- E-box in plenum chamber, right, removing and installing
- Relay carrier in right front footwell, removing and installing
- Vehicle electrical system control module, replacing
- Vehicle electrical system control module, removing and installing
- Roof electronics control module, removing and installing
- Wiring Harnesses and Connectors, Repairing
- 27 - Battery, Starter, Generator, Cruise control
- Electrical Equipment - General Information
- 27 - Battery, Starter, Generator, Cruise Control
- 90 - Instruments
- 92 - Windshield Wiper and Washer system
- 94 - Lights, Switches - Exterior
- 96 - Lights, Switches - Interior, Anti-theft
- 97 - Wiring
- Vehicle Diagnostic, Testing and Information Systems
- Wiring Harnesses and Connectors, Repairing
- Connector Repair Set VAS 6410
- Electrical Equipment
- Entertainment Systems
- Communication
- 91 - Communication
- Communication systems
- Front Information Display Control Head Control Module
- General notes
- Troubleshooting
- Front Information Display Control Head Control Module, removing and installing
- Front Information Display Control Head Control Module, multi-pin harness connectors, overview
- Notes
- 32-pin multi-pin harness connector 1 of Front Information Display Control Head Control Module
- 4-pin multi-pin harness connector 2 of Front Information Display Control Head Control Module
- 2-pin multi-pin harness connector 3 of Front Information Display Control Head Control Module
- 20-pin multi-pin harness connector 4 of Front Information Display Control Head Control Module
- 8-pin multi-pin harness connector 5 of Front Information Display Control Head Control Module
- 8-pin multi-pin harness connector 6 of Front Information Display Control Head Control Module
- Harness connectors 7 and 8, antenna connections of Front Information Display Control Head Control Module
- Fiber-optic cable, replacing
- Notes
- Important notes
- Fiber-optic cable between Navigation System with CD Drive Control Module and Front Information Display Control Head Control Module , replacing
- Fiber-optic cable between Navigation System with CD Drive Control Module , Front Information Display Control Head Control Module and Rear Information Display Control Head , replacing
- Checking and erasing DTC memory after replacing fiber-optic cable
- Communications system, adapting components
- Sound systems Standard and Upgrade
- Analog tuner for television reception (TV)
- Digital TV tuner for digital TV (DVB-T)
- Control module for navigation with CD-mechanism
- Multimedia system (Rear Seat DVD)
- General notes
- Multimedia system, overview
- Connector assignments on system components
- Relays and fuses for multimedia system
- Multimedia DVD changer, removing and installing
- Control head control module, removing and installing
- Multimedia control module, removing and installing
- Multimedia control head, removing and installing
- Additional connection for audio and video, removing and installing
- Telematics system (only for USA)
- CD Changer
- Speaker system
- General description
- Speaker system, overview
- Front bass speakers, removing and installing
- Front mid-bass speaker, removing and installing
- Front mid-range speakers, removing and installing
- Front treble speakers, removing and installing
- Rear bass speakers, removing and installing
- Rear mid-range speaker, removing and installing
- Antenna systems
- Telephone system
- General notes
- Troubleshooting
- Telephone system, overview
- Telephone/Telematics Control Module or Operating Electronics and Telephone Control Module, removing and installing
- Multi-pin harness connectors on Telephone/Telematics Control Module J526
- Telephone Microphone, removing and installing
- Telephone mounting bracket, removing and installing
- Second wireless telephone with cellular telephone (pairing process), adapting
- Multi-function steering wheel
- Cellular telephone and two-way radios, operation notes
- General notes
- Cellular phones and portable two-way radios may not be used in the vehicle without a separate external antenna.
- Installation and operation of two-way radios with a transmitted output above 10 watts for the radio communication services listed in the table is only permitted regarding the following prerequisites:
- Performing repairs, notes
- Battery, transmitter/receiver unit, fuse and wiring harness, overview
- Transmitted output and antenna installation locations
- General notes
- Reception interference suppression measures
- 91 - Communication
- Communication
- Exterior Lights
- Electrical Equipment
- 27 - Battery, Starter, Generator, Cruise control
- Battery
- Battery, checking
- Battery, charging
- Battery, disconnecting and reconnecting
- Battery, disconnecting and reconnecting
- Battery (vehicles with two-battery concept), disconnecting and connecting
- Notes
- Battery disconnecting and reconnecting sequence
- Disconnecting battery in luggage compartment, right
- Disconnecting second battery in luggage compartment, left
- Batteries, reconnecting sequence
- Connecting second battery in luggage compartment, left
- Connecting battery in luggage compartment, right
- Work steps required after reconnecting battery
- Battery - vehicles with electric closing assist, disconnecting and connecting
- Battery, removing and installing
- Battery cut-out relay J7 , removing and installing
- Battery cut-off
- Battery monitoring control module J367 , removing and installing
- Tightening Torques: Battery
- Starter
- Tightening Torques: Starter
- Generator, removing and installing
- Generator, removing and installing
- Generator features
- Ribbed belt, checking
- Generator (8-cyl. Gasoline engine), assembly overview
- Generator (8-cyl. gasoline engine), removing and installing
- Generator, 12-cyl. Gasoline engine
- Generator (12-cyl. gasoline engine), removing and installing
- Generator ribbed belt pulley, removing and installing
- Tightening Torques: Generator
- Adaptive Cruise Control (ACC)
- Cruise control system (CCS), removing and installing
- 90 - Instruments
- Instrument cluster
- Service interval indicator
- 92 - Windshield wiper and washer system
- Front windshield wiper system
- Front windshield wiper system
- General information
- Front windshield wiper system, removing and installing
- Notes
- Front windshield wiper system, removing
- Wiper arms, removing
- Plenum chamber cover, removing
- Cowl, removing
- Drivers side wiper frame, installing
- Left wiper frame, removing
- Removing wiper motor from left wiper frame
- Installing wiper motor into left wiper frame
- Right wiper frame, removing
- Removing wiper motor from wiper frame
- Installing wiper motor into right wiper frame
- Rest position of windshield wiper blades, adjusting
- Aero wipers, removing and installing
- Rain sensor G213 , removing and installing
- Windshield washer system
- Windshield washer system
- Front windshield washer system - assembly overview
- Washer fluid reservoir, removing and installing
- Windshield Washer Pump V5 , removing and installing
- Windshield Washer Fluid Level Sensor G33 , removing and installing
- Washer nozzles for front windshield washer system, removing and installing
- Spray jets for front windshield washer system, checking
- Headlamp cleaning system
- Washer Hose Couplings
- Washer hoses, repairing
- Tightening Torques: Windshield wiper and washer system
- 94 - Lights, Switches - Exterior
- Headlight with one gas-discharge bulb
- Headlight with one gas-discharge bulb
- Main headlamp with one gas-discharge bulb, assembly overview
- Main headlamp, removing and installing
- Correcting installation position of headlamp
- Bulbs for main headlamps with one gas discharge bulb, replacing
- Automatic headlamp range control adjusting motor, removing and installing
- Removing and installing Headlamp Range Control Module
- Level control system sensor, removing and installing
- Headlight range control module, coding
- Main headlamp, adjusting
- Main headlamp with two gas-discharge bulbs
- Main headlamp with two gas-discharge bulbs
- Main headlamp with two gas-discharge bulbs, assembly overview
- Main headlamp, removing and installing
- Correcting installation position of headlamp
- Bulbs for main headlamps with two gas discharge bulbs, replacing
- Automatic headlamp range control adjusting motor, removing and installing
- Removing and installing Headlamp Range Control Module
- HID lamp high beam control module, removing and installing
- Level control system sensor, removing and installing
- Headlight range control module, coding
- Main headlamp, adjusting
- Fog lamps
- Mirror turn signals and entry lights in exterior mirror
- Taillamps
- Taillamps
- Taillamp assembly in side panel - assembly overview
- Taillight in rear lid, assembly overview
- Taillamp assembly in side panel, removing and installing
- Tail light assembly in luggage compartment lid, removing and installing
- Back-up light, removing and installing
- Gap dimensions of taillamp assemblies
- Rear light function, checking
- License Plate Lights
- High-Mount Brake Light
- Steering column switch
- Access/start authorization
- Access/start authorization
- Emergency release
- Access/Start Authorization Switch E415
- Access/Start Authorization Button E408
- Access/Start Control Module J518
- Access/start authorization antennas, assembly overview
- Access/start authorization antennas, removing and installing
- Notes
- Drivers Access/Start Authorization Antenna R134 , removing and installing
- Front Passengers Access/Start Authorization Antenna R135 , removing and installing
- Access/Start Authorization Antenna (in rear bumper) R136
- Luggage Compartment Access/Start Authorization Antenna R137 , removing and installing
- Interior Access/Start Authorization Antenna 1 R138 , removing and installing
- Interior Access/Start Authorization Antenna 2 R139 , removing and installing
- Interior Access/Start Authorization Antenna 3 R154 , removing and installing
- Antenna for Access/Start Authorization, checking
- Notes
- Checking Drivers Access/Start Authorization Antenna R134
- Checking Front Passengers Access/Start Authorization Antenna R135
- Checking Access/Start Authorization Antenna (in rear bumper) R136
- Checking Luggage Compartment Access/Start Authorization Antenna R137
- Checking Interior Access/Start Authorization Antenna 1 R138
- Checking Interior Access/Start Authorization Antenna 2 R139
- Checking Interior Access/Start Authorization Antenna 3 R154
- Antenna for Access/Start Authorization, tightening torques
- Parking aid
- Parking aid
- General information
- Parking assistance system - assembly overview
- Parking Aid Control Module J446 , removing and installing
- Front parking aid sensor, removing and installing
- Rear parking aid sensor, removing and installing
- Front parking aid display, removing and installing
- Rear parking aid display, removing
- Front side marker lamp, removing and installing
- Front windshield wiper system
- 96 - Lights, Switches - Interior, Anti-theft
- Interior lights and switches
- Lights and switches in the instrument panel
- Lights and switches in the instrument panel
- Light Switch E1 , removing and installing
- Instrument panel light dimmer switch E20 and trip odometer reset switch E123 , removing and installing
- Rear window shade switch E149 and parking aid button E266 , removing and installing
- Glove Compartment Light W6 , removing and installing
- Glove Compartment Lamp Switch E26 , removing and installing
- Steering Column Adjustment Switch E167 , removing and installing
- Footwell lights , removing and installing
- Front Doors - Lights and Switches
- Front Doors - Lights and Switches
- Central switch for window regulator, in drivers door E189 , switch for rear lid remote control lock E233 , and fuel tank lid unlock button E319 , removing and installing
- Right front window switch E41 , removing and installing
- Front Interior Locking Button E308 and E309 , removing and installing
- Front Door Opener Illumination L108 and L109 , removing and installing
- Front door contact switch, removing and installing
- Front Entry Light W31 and W32 , removing and installing
- Door Warning Light W30 and W36 , removing and installing
- Rear Doors - Lights and Switches
- Rear Doors - Lights and Switches
- Rear Window Switch E52 and E54 , removing and installing
- Rear Interior Locking Button E310 and E311 , removing and installing
- Rear Door Opener Illumination L110 and L111 , removing and installing
- Rear door contact switch, removing and installing
- Rear Entry Light W33 and W34 , removing and installing
- Rear Door Warning Light W37 and W38 , removing and installing
- Luggage Compartment - Lights and Switches
- Headliner - Lights and Switches
- Headliner - Lights and Switches
- Front interior light W1 , removing and installing
- Map/Reading Light W19 and W13 , removing and installing
- Sunroof Switch E8 , removing and installing
- Rear interior and reading lights, removing and installing
- Rear Interior Lamp Button E327 and E329 , removing and installing
- Removing and installing garage door opener
- Switch panel in roof module, removing and installing
- Center Console - Lights and Switches
- Center Console - Lights and Switches
- Mirror adjustment switch E43 with mirror selector switch E48 , removing and installing
- Access/start authorization button E408 , removing and installing
- Switch panel for front seat heating/ventilation with buttons for dampening, ESP, and level control in the center console, removing and installing
- Switch panel for rear seat position and heating/ventilation memory (4-seater), removing and installing
- Switch panel for rear seat adjustment (4-seater), removing and installing
- Switch panel for rear seat lumbar adjustment (5-seater), removing and installing
- Other electrical components
- 97 - Wiring
- Vehicle Diagnostic, Testing and Information Systems
- Fuse holder, relay panel, E-boxes and control modules, removing and installing
- Fuse holder, relay panel, E-boxes and control modules, removing and installing
- Fuse holder under the instrument panel, left, removing and installing
- Auxiliary fuse box in luggage compartment, left, removing and installing
- Thermal fuse box on driver side, removing and installing
- E-box in luggage compartment, left, removing and installing
- E-box in plenum chamber, right, removing and installing
- Relay carrier in right front footwell, removing and installing
- Vehicle electrical system control module, replacing
- Vehicle electrical system control module, removing and installing
- Roof electronics control module, removing and installing
- Wiring Harnesses and Connectors, Repairing
- 27 - Battery, Starter, Generator, Cruise control
- Electrical Equipment
- Gauges & Instrument Panels
- Body Interior
- 68 - Interior equipment
- Rearview mirror
- Storage compartments, covers and trim
- Tools
- Center console (4-seater), removing and installing
- Center console (5-seater), removing and installing
- Front ashtray unit, removing and installing
- Storage compartment (front) in center console (4-seater), removing and installing
- Storage compartment (rear) in center console (4-seater), removing and installing
- Cup holder, removing and installing
- Footwell cover (passenger side), removing and installing
- Glove compartment, removing and installing
- Footwell cover (driver side), removing and installing
- Fuse panel cover (driver side), removing and installing
- Instrument panel side covers, removing and installing
- Sun visor, removing and installing
- Grab handles
- 69 - Passenger protection - Airbags, Seat belts
- Seat belts
- Tools
- Safety precautions for belt tensioners
- Disposing of belt tensioner units
- Front seat belt with two belt retractors, removing and installing
- Front seat belt, removing and installing
- Belt height adjuster (electrical), removing and installing
- Belt height adjuster (mechanical), removing and installing
- Front seat belt latch, removing and installing
- Multi-part locking tongue, detaching
- Shoulder and lap belt, connecting
- Rear seat belts (4-seater), removing and installing
- Rear outer seat belts (5-seater), removing and installing
- Rear middle seat belt (5-seater), removing and installing
- Rear belt latch (4-seater), removing and installing
- Rear belt latches (5-seater), removing and installing
- Seat belts, inspecting
- Inspecting child seat anchors (LATCH system Lower Anchors and Tethers for CHildren), after accident
- Airbag
- Location overview: Airbag components
- Safety precautions for work on airbags
- Disposal of airbag units
- Airbag units, deploying prior to disposal
- Airbag units, replacing after an accident
- Airbag control module -J234-, removing and installing
- Driver airbag unit, removing and installing
- Driver airbag unit mounting plate, removing and installing
- Steering wheel, removing and installing
- Passengers side airbag unit, removing and installing
- Side airbags for driver and front passenger, removing and installing
- Driver and passenger side head curtain airbags, removing and installing
- Rear side airbag, removing and installing
- Passenger Occupant Detection System (PODS) (USA only), removing and installing
- Components, adapting
- Crash sensors
- Seat belts
- 70 - Interior trim
- Instrument panel, removing and installing
- Door trim
- Sun shades
- Pillar trim
- Upper A-pillar trim, removing and installing
- Passenger side lower A-pillar trim, removing and installing
- Driver side lower A-pillar trim, removing and installing
- Upper B-pillar trim, removing and installing
- Lower B-pillar trim, removing and installing
- Upper C-pillar trim, removing and installing
- Lower C-pillar trim, removing and installing
- Wheel house trim, removing and installing
- Rear shelf
- Luggage compartment trim
- Roof trim
- 72 - Seat - Frames
- Front seats
- Tools
- Front seat, removing and installing
- Seat trim, removing and installing
- Seat switch assembly, removing and installing
- Seat control module, removing and installing
- Seat longitudinal adjuster, removing and installing
- Drive motor for seat longitudinal adjuster, removing and installing
- Seat inclination adjuster, removing and installing
- Seat height adjuster, removing and installing
- Seat backrest, removing and installing
- Lumbar support, removing and installing
- Seat backrest panel, 18/16-position seat, removing and installing
- Seat backrest panel, 12-way seat, removing and installing
- Seat headrest, removing and installing
- Rear seats
- Tools
- Rear seat cushions, 10-position seat, removing and installing
- Rear seat backrest, 10-position seat, removing and installing
- Seat frame, 10-position seat, removing and installing
- Control module, 10-position seat, removing and installing
- Headrest, 10-position seat, removing and installing
- Rear seat cushion, 5-seater, removing and installing
- Rear seat backrest, 5-seater, removing and installing
- Front seats
- 74 - Seats - Upholstery, Covers
- Front seat covers and upholstery
- Rear seat covers and upholstery
- Tools
- Rear seat cushion cover and padding, 10-position seat, removing and installing
- Rear seat backrest cover and padding, 10-position seat, removing and installing
- Center armrest, 4-seater, removing and installing
- Rear seat cushion cover and padding, 5-seater, removing and installing
- Rear seat backrest cover and padding, 5-seater, removing and installing
- Center armrest, 5-seater, removing and installing
- Cupholder in center armrest, 5-seater, removing and installing
- Center headrest, 5-seater, removing and installing
- Rear seat heating elements, replacing
- 76 - Gas, water, electricity
- 68 - Interior equipment
- Electrical Equipment
- 27 - Battery, Starter, Generator, Cruise control
- Battery
- Battery, checking
- Battery, charging
- Battery, disconnecting and reconnecting
- Battery, disconnecting and reconnecting
- Battery (vehicles with two-battery concept), disconnecting and connecting
- Notes
- Battery disconnecting and reconnecting sequence
- Disconnecting battery in luggage compartment, right
- Disconnecting second battery in luggage compartment, left
- Batteries, reconnecting sequence
- Connecting second battery in luggage compartment, left
- Connecting battery in luggage compartment, right
- Work steps required after reconnecting battery
- Battery - vehicles with electric closing assist, disconnecting and connecting
- Battery, removing and installing
- Battery cut-out relay J7 , removing and installing
- Battery cut-off
- Battery monitoring control module J367 , removing and installing
- Tightening Torques: Battery
- Starter
- Tightening Torques: Starter
- Generator, removing and installing
- Generator, removing and installing
- Generator features
- Ribbed belt, checking
- Generator (8-cyl. Gasoline engine), assembly overview
- Generator (8-cyl. gasoline engine), removing and installing
- Generator, 12-cyl. Gasoline engine
- Generator (12-cyl. gasoline engine), removing and installing
- Generator ribbed belt pulley, removing and installing
- Tightening Torques: Generator
- Adaptive Cruise Control (ACC)
- Cruise control system (CCS), removing and installing
- 90 - Instruments
- Instrument cluster
- Service interval indicator
- 92 - Windshield wiper and washer system
- Front windshield wiper system
- Front windshield wiper system
- General information
- Front windshield wiper system, removing and installing
- Notes
- Front windshield wiper system, removing
- Wiper arms, removing
- Plenum chamber cover, removing
- Cowl, removing
- Drivers side wiper frame, installing
- Left wiper frame, removing
- Removing wiper motor from left wiper frame
- Installing wiper motor into left wiper frame
- Right wiper frame, removing
- Removing wiper motor from wiper frame
- Installing wiper motor into right wiper frame
- Rest position of windshield wiper blades, adjusting
- Aero wipers, removing and installing
- Rain sensor G213 , removing and installing
- Windshield washer system
- Windshield washer system
- Front windshield washer system - assembly overview
- Washer fluid reservoir, removing and installing
- Windshield Washer Pump V5 , removing and installing
- Windshield Washer Fluid Level Sensor G33 , removing and installing
- Washer nozzles for front windshield washer system, removing and installing
- Spray jets for front windshield washer system, checking
- Headlamp cleaning system
- Washer Hose Couplings
- Washer hoses, repairing
- Tightening Torques: Windshield wiper and washer system
- 94 - Lights, Switches - Exterior
- Headlight with one gas-discharge bulb
- Headlight with one gas-discharge bulb
- Main headlamp with one gas-discharge bulb, assembly overview
- Main headlamp, removing and installing
- Correcting installation position of headlamp
- Bulbs for main headlamps with one gas discharge bulb, replacing
- Automatic headlamp range control adjusting motor, removing and installing
- Removing and installing Headlamp Range Control Module
- Level control system sensor, removing and installing
- Headlight range control module, coding
- Main headlamp, adjusting
- Main headlamp with two gas-discharge bulbs
- Main headlamp with two gas-discharge bulbs
- Main headlamp with two gas-discharge bulbs, assembly overview
- Main headlamp, removing and installing
- Correcting installation position of headlamp
- Bulbs for main headlamps with two gas discharge bulbs, replacing
- Automatic headlamp range control adjusting motor, removing and installing
- Removing and installing Headlamp Range Control Module
- HID lamp high beam control module, removing and installing
- Level control system sensor, removing and installing
- Headlight range control module, coding
- Main headlamp, adjusting
- Fog lamps
- Mirror turn signals and entry lights in exterior mirror
- Taillamps
- Taillamps
- Taillamp assembly in side panel - assembly overview
- Taillight in rear lid, assembly overview
- Taillamp assembly in side panel, removing and installing
- Tail light assembly in luggage compartment lid, removing and installing
- Back-up light, removing and installing
- Gap dimensions of taillamp assemblies
- Rear light function, checking
- License Plate Lights
- High-Mount Brake Light
- Steering column switch
- Access/start authorization
- Access/start authorization
- Emergency release
- Access/Start Authorization Switch E415
- Access/Start Authorization Button E408
- Access/Start Control Module J518
- Access/start authorization antennas, assembly overview
- Access/start authorization antennas, removing and installing
- Notes
- Drivers Access/Start Authorization Antenna R134 , removing and installing
- Front Passengers Access/Start Authorization Antenna R135 , removing and installing
- Access/Start Authorization Antenna (in rear bumper) R136
- Luggage Compartment Access/Start Authorization Antenna R137 , removing and installing
- Interior Access/Start Authorization Antenna 1 R138 , removing and installing
- Interior Access/Start Authorization Antenna 2 R139 , removing and installing
- Interior Access/Start Authorization Antenna 3 R154 , removing and installing
- Antenna for Access/Start Authorization, checking
- Notes
- Checking Drivers Access/Start Authorization Antenna R134
- Checking Front Passengers Access/Start Authorization Antenna R135
- Checking Access/Start Authorization Antenna (in rear bumper) R136
- Checking Luggage Compartment Access/Start Authorization Antenna R137
- Checking Interior Access/Start Authorization Antenna 1 R138
- Checking Interior Access/Start Authorization Antenna 2 R139
- Checking Interior Access/Start Authorization Antenna 3 R154
- Antenna for Access/Start Authorization, tightening torques
- Parking aid
- Parking aid
- General information
- Parking assistance system - assembly overview
- Parking Aid Control Module J446 , removing and installing
- Front parking aid sensor, removing and installing
- Rear parking aid sensor, removing and installing
- Front parking aid display, removing and installing
- Rear parking aid display, removing
- Front side marker lamp, removing and installing
- Front windshield wiper system
- 96 - Lights, Switches - Interior, Anti-theft
- Interior lights and switches
- Lights and switches in the instrument panel
- Lights and switches in the instrument panel
- Light Switch E1 , removing and installing
- Instrument panel light dimmer switch E20 and trip odometer reset switch E123 , removing and installing
- Rear window shade switch E149 and parking aid button E266 , removing and installing
- Glove Compartment Light W6 , removing and installing
- Glove Compartment Lamp Switch E26 , removing and installing
- Steering Column Adjustment Switch E167 , removing and installing
- Footwell lights , removing and installing
- Front Doors - Lights and Switches
- Front Doors - Lights and Switches
- Central switch for window regulator, in drivers door E189 , switch for rear lid remote control lock E233 , and fuel tank lid unlock button E319 , removing and installing
- Right front window switch E41 , removing and installing
- Front Interior Locking Button E308 and E309 , removing and installing
- Front Door Opener Illumination L108 and L109 , removing and installing
- Front door contact switch, removing and installing
- Front Entry Light W31 and W32 , removing and installing
- Door Warning Light W30 and W36 , removing and installing
- Rear Doors - Lights and Switches
- Rear Doors - Lights and Switches
- Rear Window Switch E52 and E54 , removing and installing
- Rear Interior Locking Button E310 and E311 , removing and installing
- Rear Door Opener Illumination L110 and L111 , removing and installing
- Rear door contact switch, removing and installing
- Rear Entry Light W33 and W34 , removing and installing
- Rear Door Warning Light W37 and W38 , removing and installing
- Luggage Compartment - Lights and Switches
- Headliner - Lights and Switches
- Headliner - Lights and Switches
- Front interior light W1 , removing and installing
- Map/Reading Light W19 and W13 , removing and installing
- Sunroof Switch E8 , removing and installing
- Rear interior and reading lights, removing and installing
- Rear Interior Lamp Button E327 and E329 , removing and installing
- Removing and installing garage door opener
- Switch panel in roof module, removing and installing
- Center Console - Lights and Switches
- Center Console - Lights and Switches
- Mirror adjustment switch E43 with mirror selector switch E48 , removing and installing
- Access/start authorization button E408 , removing and installing
- Switch panel for front seat heating/ventilation with buttons for dampening, ESP, and level control in the center console, removing and installing
- Switch panel for rear seat position and heating/ventilation memory (4-seater), removing and installing
- Switch panel for rear seat adjustment (4-seater), removing and installing
- Switch panel for rear seat lumbar adjustment (5-seater), removing and installing
- Other electrical components
- 97 - Wiring
- Vehicle Diagnostic, Testing and Information Systems
- Fuse holder, relay panel, E-boxes and control modules, removing and installing
- Fuse holder, relay panel, E-boxes and control modules, removing and installing
- Fuse holder under the instrument panel, left, removing and installing
- Auxiliary fuse box in luggage compartment, left, removing and installing
- Thermal fuse box on driver side, removing and installing
- E-box in luggage compartment, left, removing and installing
- E-box in plenum chamber, right, removing and installing
- Relay carrier in right front footwell, removing and installing
- Vehicle electrical system control module, replacing
- Vehicle electrical system control module, removing and installing
- Roof electronics control module, removing and installing
- Wiring Harnesses and Connectors, Repairing
- 27 - Battery, Starter, Generator, Cruise control
- Electrical Equipment - General Information
- 27 - Battery, Starter, Generator, Cruise Control
- 90 - Instruments
- 92 - Windshield Wiper and Washer system
- 94 - Lights, Switches - Exterior
- 96 - Lights, Switches - Interior, Anti-theft
- 97 - Wiring
- Vehicle Diagnostic, Testing and Information Systems
- Wiring Harnesses and Connectors, Repairing
- Connector Repair Set VAS 6410
- Body Interior
- Headlights
- Electrical Equipment
- 27 - Battery, Starter, Generator, Cruise control
- Battery
- Battery, checking
- Battery, charging
- Battery, disconnecting and reconnecting
- Battery, disconnecting and reconnecting
- Battery (vehicles with two-battery concept), disconnecting and connecting
- Notes
- Battery disconnecting and reconnecting sequence
- Disconnecting battery in luggage compartment, right
- Disconnecting second battery in luggage compartment, left
- Batteries, reconnecting sequence
- Connecting second battery in luggage compartment, left
- Connecting battery in luggage compartment, right
- Work steps required after reconnecting battery
- Battery - vehicles with electric closing assist, disconnecting and connecting
- Battery, removing and installing
- Battery cut-out relay J7 , removing and installing
- Battery cut-off
- Battery monitoring control module J367 , removing and installing
- Tightening Torques: Battery
- Starter
- Tightening Torques: Starter
- Generator, removing and installing
- Generator, removing and installing
- Generator features
- Ribbed belt, checking
- Generator (8-cyl. Gasoline engine), assembly overview
- Generator (8-cyl. gasoline engine), removing and installing
- Generator, 12-cyl. Gasoline engine
- Generator (12-cyl. gasoline engine), removing and installing
- Generator ribbed belt pulley, removing and installing
- Tightening Torques: Generator
- Adaptive Cruise Control (ACC)
- Cruise control system (CCS), removing and installing
- 90 - Instruments
- Instrument cluster
- Service interval indicator
- 92 - Windshield wiper and washer system
- Front windshield wiper system
- Front windshield wiper system
- General information
- Front windshield wiper system, removing and installing
- Notes
- Front windshield wiper system, removing
- Wiper arms, removing
- Plenum chamber cover, removing
- Cowl, removing
- Drivers side wiper frame, installing
- Left wiper frame, removing
- Removing wiper motor from left wiper frame
- Installing wiper motor into left wiper frame
- Right wiper frame, removing
- Removing wiper motor from wiper frame
- Installing wiper motor into right wiper frame
- Rest position of windshield wiper blades, adjusting
- Aero wipers, removing and installing
- Rain sensor G213 , removing and installing
- Windshield washer system
- Windshield washer system
- Front windshield washer system - assembly overview
- Washer fluid reservoir, removing and installing
- Windshield Washer Pump V5 , removing and installing
- Windshield Washer Fluid Level Sensor G33 , removing and installing
- Washer nozzles for front windshield washer system, removing and installing
- Spray jets for front windshield washer system, checking
- Headlamp cleaning system
- Washer Hose Couplings
- Washer hoses, repairing
- Tightening Torques: Windshield wiper and washer system
- 94 - Lights, Switches - Exterior
- Headlight with one gas-discharge bulb
- Headlight with one gas-discharge bulb
- Main headlamp with one gas-discharge bulb, assembly overview
- Main headlamp, removing and installing
- Correcting installation position of headlamp
- Bulbs for main headlamps with one gas discharge bulb, replacing
- Automatic headlamp range control adjusting motor, removing and installing
- Removing and installing Headlamp Range Control Module
- Level control system sensor, removing and installing
- Headlight range control module, coding
- Main headlamp, adjusting
- Main headlamp with two gas-discharge bulbs
- Main headlamp with two gas-discharge bulbs
- Main headlamp with two gas-discharge bulbs, assembly overview
- Main headlamp, removing and installing
- Correcting installation position of headlamp
- Bulbs for main headlamps with two gas discharge bulbs, replacing
- Automatic headlamp range control adjusting motor, removing and installing
- Removing and installing Headlamp Range Control Module
- HID lamp high beam control module, removing and installing
- Level control system sensor, removing and installing
- Headlight range control module, coding
- Main headlamp, adjusting
- Fog lamps
- Mirror turn signals and entry lights in exterior mirror
- Taillamps
- Taillamps
- Taillamp assembly in side panel - assembly overview
- Taillight in rear lid, assembly overview
- Taillamp assembly in side panel, removing and installing
- Tail light assembly in luggage compartment lid, removing and installing
- Back-up light, removing and installing
- Gap dimensions of taillamp assemblies
- Rear light function, checking
- License Plate Lights
- High-Mount Brake Light
- Steering column switch
- Access/start authorization
- Access/start authorization
- Emergency release
- Access/Start Authorization Switch E415
- Access/Start Authorization Button E408
- Access/Start Control Module J518
- Access/start authorization antennas, assembly overview
- Access/start authorization antennas, removing and installing
- Notes
- Drivers Access/Start Authorization Antenna R134 , removing and installing
- Front Passengers Access/Start Authorization Antenna R135 , removing and installing
- Access/Start Authorization Antenna (in rear bumper) R136
- Luggage Compartment Access/Start Authorization Antenna R137 , removing and installing
- Interior Access/Start Authorization Antenna 1 R138 , removing and installing
- Interior Access/Start Authorization Antenna 2 R139 , removing and installing
- Interior Access/Start Authorization Antenna 3 R154 , removing and installing
- Antenna for Access/Start Authorization, checking
- Notes
- Checking Drivers Access/Start Authorization Antenna R134
- Checking Front Passengers Access/Start Authorization Antenna R135
- Checking Access/Start Authorization Antenna (in rear bumper) R136
- Checking Luggage Compartment Access/Start Authorization Antenna R137
- Checking Interior Access/Start Authorization Antenna 1 R138
- Checking Interior Access/Start Authorization Antenna 2 R139
- Checking Interior Access/Start Authorization Antenna 3 R154
- Antenna for Access/Start Authorization, tightening torques
- Parking aid
- Parking aid
- General information
- Parking assistance system - assembly overview
- Parking Aid Control Module J446 , removing and installing
- Front parking aid sensor, removing and installing
- Rear parking aid sensor, removing and installing
- Front parking aid display, removing and installing
- Rear parking aid display, removing
- Front side marker lamp, removing and installing
- Front windshield wiper system
- 96 - Lights, Switches - Interior, Anti-theft
- Interior lights and switches
- Lights and switches in the instrument panel
- Lights and switches in the instrument panel
- Light Switch E1 , removing and installing
- Instrument panel light dimmer switch E20 and trip odometer reset switch E123 , removing and installing
- Rear window shade switch E149 and parking aid button E266 , removing and installing
- Glove Compartment Light W6 , removing and installing
- Glove Compartment Lamp Switch E26 , removing and installing
- Steering Column Adjustment Switch E167 , removing and installing
- Footwell lights , removing and installing
- Front Doors - Lights and Switches
- Front Doors - Lights and Switches
- Central switch for window regulator, in drivers door E189 , switch for rear lid remote control lock E233 , and fuel tank lid unlock button E319 , removing and installing
- Right front window switch E41 , removing and installing
- Front Interior Locking Button E308 and E309 , removing and installing
- Front Door Opener Illumination L108 and L109 , removing and installing
- Front door contact switch, removing and installing
- Front Entry Light W31 and W32 , removing and installing
- Door Warning Light W30 and W36 , removing and installing
- Rear Doors - Lights and Switches
- Rear Doors - Lights and Switches
- Rear Window Switch E52 and E54 , removing and installing
- Rear Interior Locking Button E310 and E311 , removing and installing
- Rear Door Opener Illumination L110 and L111 , removing and installing
- Rear door contact switch, removing and installing
- Rear Entry Light W33 and W34 , removing and installing
- Rear Door Warning Light W37 and W38 , removing and installing
- Luggage Compartment - Lights and Switches
- Headliner - Lights and Switches
- Headliner - Lights and Switches
- Front interior light W1 , removing and installing
- Map/Reading Light W19 and W13 , removing and installing
- Sunroof Switch E8 , removing and installing
- Rear interior and reading lights, removing and installing
- Rear Interior Lamp Button E327 and E329 , removing and installing
- Removing and installing garage door opener
- Switch panel in roof module, removing and installing
- Center Console - Lights and Switches
- Center Console - Lights and Switches
- Mirror adjustment switch E43 with mirror selector switch E48 , removing and installing
- Access/start authorization button E408 , removing and installing
- Switch panel for front seat heating/ventilation with buttons for dampening, ESP, and level control in the center console, removing and installing
- Switch panel for rear seat position and heating/ventilation memory (4-seater), removing and installing
- Switch panel for rear seat adjustment (4-seater), removing and installing
- Switch panel for rear seat lumbar adjustment (5-seater), removing and installing
- Other electrical components
- 97 - Wiring
- Vehicle Diagnostic, Testing and Information Systems
- Fuse holder, relay panel, E-boxes and control modules, removing and installing
- Fuse holder, relay panel, E-boxes and control modules, removing and installing
- Fuse holder under the instrument panel, left, removing and installing
- Auxiliary fuse box in luggage compartment, left, removing and installing
- Thermal fuse box on driver side, removing and installing
- E-box in luggage compartment, left, removing and installing
- E-box in plenum chamber, right, removing and installing
- Relay carrier in right front footwell, removing and installing
- Vehicle electrical system control module, replacing
- Vehicle electrical system control module, removing and installing
- Roof electronics control module, removing and installing
- Wiring Harnesses and Connectors, Repairing
- 27 - Battery, Starter, Generator, Cruise control
- Electrical Equipment - General Information
- 27 - Battery, Starter, Generator, Cruise Control
- 90 - Instruments
- 92 - Windshield Wiper and Washer system
- 94 - Lights, Switches - Exterior
- 96 - Lights, Switches - Interior, Anti-theft
- 97 - Wiring
- Vehicle Diagnostic, Testing and Information Systems
- Wiring Harnesses and Connectors, Repairing
- Connector Repair Set VAS 6410
- Electrical Equipment
- Ignition Switch/Steering Lock
- Electrical Equipment
- 27 - Battery, Starter, Generator, Cruise control
- Battery
- Battery, checking
- Battery, charging
- Battery, disconnecting and reconnecting
- Battery, disconnecting and reconnecting
- Battery (vehicles with two-battery concept), disconnecting and connecting
- Notes
- Battery disconnecting and reconnecting sequence
- Disconnecting battery in luggage compartment, right
- Disconnecting second battery in luggage compartment, left
- Batteries, reconnecting sequence
- Connecting second battery in luggage compartment, left
- Connecting battery in luggage compartment, right
- Work steps required after reconnecting battery
- Battery - vehicles with electric closing assist, disconnecting and connecting
- Battery, removing and installing
- Battery cut-out relay J7 , removing and installing
- Battery cut-off
- Battery monitoring control module J367 , removing and installing
- Tightening Torques: Battery
- Starter
- Tightening Torques: Starter
- Generator, removing and installing
- Generator, removing and installing
- Generator features
- Ribbed belt, checking
- Generator (8-cyl. Gasoline engine), assembly overview
- Generator (8-cyl. gasoline engine), removing and installing
- Generator, 12-cyl. Gasoline engine
- Generator (12-cyl. gasoline engine), removing and installing
- Generator ribbed belt pulley, removing and installing
- Tightening Torques: Generator
- Adaptive Cruise Control (ACC)
- Cruise control system (CCS), removing and installing
- 90 - Instruments
- Instrument cluster
- Service interval indicator
- 92 - Windshield wiper and washer system
- Front windshield wiper system
- Front windshield wiper system
- General information
- Front windshield wiper system, removing and installing
- Notes
- Front windshield wiper system, removing
- Wiper arms, removing
- Plenum chamber cover, removing
- Cowl, removing
- Drivers side wiper frame, installing
- Left wiper frame, removing
- Removing wiper motor from left wiper frame
- Installing wiper motor into left wiper frame
- Right wiper frame, removing
- Removing wiper motor from wiper frame
- Installing wiper motor into right wiper frame
- Rest position of windshield wiper blades, adjusting
- Aero wipers, removing and installing
- Rain sensor G213 , removing and installing
- Windshield washer system
- Windshield washer system
- Front windshield washer system - assembly overview
- Washer fluid reservoir, removing and installing
- Windshield Washer Pump V5 , removing and installing
- Windshield Washer Fluid Level Sensor G33 , removing and installing
- Washer nozzles for front windshield washer system, removing and installing
- Spray jets for front windshield washer system, checking
- Headlamp cleaning system
- Washer Hose Couplings
- Washer hoses, repairing
- Tightening Torques: Windshield wiper and washer system
- 94 - Lights, Switches - Exterior
- Headlight with one gas-discharge bulb
- Headlight with one gas-discharge bulb
- Main headlamp with one gas-discharge bulb, assembly overview
- Main headlamp, removing and installing
- Correcting installation position of headlamp
- Bulbs for main headlamps with one gas discharge bulb, replacing
- Automatic headlamp range control adjusting motor, removing and installing
- Removing and installing Headlamp Range Control Module
- Level control system sensor, removing and installing
- Headlight range control module, coding
- Main headlamp, adjusting
- Main headlamp with two gas-discharge bulbs
- Main headlamp with two gas-discharge bulbs
- Main headlamp with two gas-discharge bulbs, assembly overview
- Main headlamp, removing and installing
- Correcting installation position of headlamp
- Bulbs for main headlamps with two gas discharge bulbs, replacing
- Automatic headlamp range control adjusting motor, removing and installing
- Removing and installing Headlamp Range Control Module
- HID lamp high beam control module, removing and installing
- Level control system sensor, removing and installing
- Headlight range control module, coding
- Main headlamp, adjusting
- Fog lamps
- Mirror turn signals and entry lights in exterior mirror
- Taillamps
- Taillamps
- Taillamp assembly in side panel - assembly overview
- Taillight in rear lid, assembly overview
- Taillamp assembly in side panel, removing and installing
- Tail light assembly in luggage compartment lid, removing and installing
- Back-up light, removing and installing
- Gap dimensions of taillamp assemblies
- Rear light function, checking
- License Plate Lights
- High-Mount Brake Light
- Steering column switch
- Access/start authorization
- Access/start authorization
- Emergency release
- Access/Start Authorization Switch E415
- Access/Start Authorization Button E408
- Access/Start Control Module J518
- Access/start authorization antennas, assembly overview
- Access/start authorization antennas, removing and installing
- Notes
- Drivers Access/Start Authorization Antenna R134 , removing and installing
- Front Passengers Access/Start Authorization Antenna R135 , removing and installing
- Access/Start Authorization Antenna (in rear bumper) R136
- Luggage Compartment Access/Start Authorization Antenna R137 , removing and installing
- Interior Access/Start Authorization Antenna 1 R138 , removing and installing
- Interior Access/Start Authorization Antenna 2 R139 , removing and installing
- Interior Access/Start Authorization Antenna 3 R154 , removing and installing
- Antenna for Access/Start Authorization, checking
- Notes
- Checking Drivers Access/Start Authorization Antenna R134
- Checking Front Passengers Access/Start Authorization Antenna R135
- Checking Access/Start Authorization Antenna (in rear bumper) R136
- Checking Luggage Compartment Access/Start Authorization Antenna R137
- Checking Interior Access/Start Authorization Antenna 1 R138
- Checking Interior Access/Start Authorization Antenna 2 R139
- Checking Interior Access/Start Authorization Antenna 3 R154
- Antenna for Access/Start Authorization, tightening torques
- Parking aid
- Parking aid
- General information
- Parking assistance system - assembly overview
- Parking Aid Control Module J446 , removing and installing
- Front parking aid sensor, removing and installing
- Rear parking aid sensor, removing and installing
- Front parking aid display, removing and installing
- Rear parking aid display, removing
- Front side marker lamp, removing and installing
- Front windshield wiper system
- 96 - Lights, Switches - Interior, Anti-theft
- Interior lights and switches
- Lights and switches in the instrument panel
- Lights and switches in the instrument panel
- Light Switch E1 , removing and installing
- Instrument panel light dimmer switch E20 and trip odometer reset switch E123 , removing and installing
- Rear window shade switch E149 and parking aid button E266 , removing and installing
- Glove Compartment Light W6 , removing and installing
- Glove Compartment Lamp Switch E26 , removing and installing
- Steering Column Adjustment Switch E167 , removing and installing
- Footwell lights , removing and installing
- Front Doors - Lights and Switches
- Front Doors - Lights and Switches
- Central switch for window regulator, in drivers door E189 , switch for rear lid remote control lock E233 , and fuel tank lid unlock button E319 , removing and installing
- Right front window switch E41 , removing and installing
- Front Interior Locking Button E308 and E309 , removing and installing
- Front Door Opener Illumination L108 and L109 , removing and installing
- Front door contact switch, removing and installing
- Front Entry Light W31 and W32 , removing and installing
- Door Warning Light W30 and W36 , removing and installing
- Rear Doors - Lights and Switches
- Rear Doors - Lights and Switches
- Rear Window Switch E52 and E54 , removing and installing
- Rear Interior Locking Button E310 and E311 , removing and installing
- Rear Door Opener Illumination L110 and L111 , removing and installing
- Rear door contact switch, removing and installing
- Rear Entry Light W33 and W34 , removing and installing
- Rear Door Warning Light W37 and W38 , removing and installing
- Luggage Compartment - Lights and Switches
- Headliner - Lights and Switches
- Headliner - Lights and Switches
- Front interior light W1 , removing and installing
- Map/Reading Light W19 and W13 , removing and installing
- Sunroof Switch E8 , removing and installing
- Rear interior and reading lights, removing and installing
- Rear Interior Lamp Button E327 and E329 , removing and installing
- Removing and installing garage door opener
- Switch panel in roof module, removing and installing
- Center Console - Lights and Switches
- Center Console - Lights and Switches
- Mirror adjustment switch E43 with mirror selector switch E48 , removing and installing
- Access/start authorization button E408 , removing and installing
- Switch panel for front seat heating/ventilation with buttons for dampening, ESP, and level control in the center console, removing and installing
- Switch panel for rear seat position and heating/ventilation memory (4-seater), removing and installing
- Switch panel for rear seat adjustment (4-seater), removing and installing
- Switch panel for rear seat lumbar adjustment (5-seater), removing and installing
- Other electrical components
- 97 - Wiring
- Vehicle Diagnostic, Testing and Information Systems
- Fuse holder, relay panel, E-boxes and control modules, removing and installing
- Fuse holder, relay panel, E-boxes and control modules, removing and installing
- Fuse holder under the instrument panel, left, removing and installing
- Auxiliary fuse box in luggage compartment, left, removing and installing
- Thermal fuse box on driver side, removing and installing
- E-box in luggage compartment, left, removing and installing
- E-box in plenum chamber, right, removing and installing
- Relay carrier in right front footwell, removing and installing
- Vehicle electrical system control module, replacing
- Vehicle electrical system control module, removing and installing
- Roof electronics control module, removing and installing
- Wiring Harnesses and Connectors, Repairing
- 27 - Battery, Starter, Generator, Cruise control
- Electrical Equipment
- Infotainment
- Communication
- 91 - Communication
- Communication systems
- Front Information Display Control Head Control Module
- General notes
- Troubleshooting
- Front Information Display Control Head Control Module, removing and installing
- Front Information Display Control Head Control Module, multi-pin harness connectors, overview
- Notes
- 32-pin multi-pin harness connector 1 of Front Information Display Control Head Control Module
- 4-pin multi-pin harness connector 2 of Front Information Display Control Head Control Module
- 2-pin multi-pin harness connector 3 of Front Information Display Control Head Control Module
- 20-pin multi-pin harness connector 4 of Front Information Display Control Head Control Module
- 8-pin multi-pin harness connector 5 of Front Information Display Control Head Control Module
- 8-pin multi-pin harness connector 6 of Front Information Display Control Head Control Module
- Harness connectors 7 and 8, antenna connections of Front Information Display Control Head Control Module
- Fiber-optic cable, replacing
- Notes
- Important notes
- Fiber-optic cable between Navigation System with CD Drive Control Module and Front Information Display Control Head Control Module , replacing
- Fiber-optic cable between Navigation System with CD Drive Control Module , Front Information Display Control Head Control Module and Rear Information Display Control Head , replacing
- Checking and erasing DTC memory after replacing fiber-optic cable
- Communications system, adapting components
- Sound systems Standard and Upgrade
- Analog tuner for television reception (TV)
- Digital TV tuner for digital TV (DVB-T)
- Control module for navigation with CD-mechanism
- Multimedia system (Rear Seat DVD)
- General notes
- Multimedia system, overview
- Connector assignments on system components
- Relays and fuses for multimedia system
- Multimedia DVD changer, removing and installing
- Control head control module, removing and installing
- Multimedia control module, removing and installing
- Multimedia control head, removing and installing
- Additional connection for audio and video, removing and installing
- Telematics system (only for USA)
- CD Changer
- Speaker system
- General description
- Speaker system, overview
- Front bass speakers, removing and installing
- Front mid-bass speaker, removing and installing
- Front mid-range speakers, removing and installing
- Front treble speakers, removing and installing
- Rear bass speakers, removing and installing
- Rear mid-range speaker, removing and installing
- Antenna systems
- Telephone system
- General notes
- Troubleshooting
- Telephone system, overview
- Telephone/Telematics Control Module or Operating Electronics and Telephone Control Module, removing and installing
- Multi-pin harness connectors on Telephone/Telematics Control Module J526
- Telephone Microphone, removing and installing
- Telephone mounting bracket, removing and installing
- Second wireless telephone with cellular telephone (pairing process), adapting
- Multi-function steering wheel
- Cellular telephone and two-way radios, operation notes
- General notes
- Cellular phones and portable two-way radios may not be used in the vehicle without a separate external antenna.
- Installation and operation of two-way radios with a transmitted output above 10 watts for the radio communication services listed in the table is only permitted regarding the following prerequisites:
- Performing repairs, notes
- Battery, transmitter/receiver unit, fuse and wiring harness, overview
- Transmitted output and antenna installation locations
- General notes
- Reception interference suppression measures
- 91 - Communication
- Communication
- Interior/Exterior Trim
- Body Exterior
- 50 Body - Front
- Lock carrier
- Tools
- Electrical/electronic components and locations
- Lock carrier service position, assembly overview
- Service position
- Lock carrier with attachments, assembly overview
- Lock carrier with attachments, removing and installing
- Lock carrier attachments, assembly overview
- Installation note for longmember
- Installation notes for Right Distance Regulation Sensor G259
- Right Distance Regulation Sensor G259, removing and installing
- Fenders
- Noise insulation
- Lock carrier
- 55 Hood, Lids
- Contact corrosion!
- Hood
- Locking and unlocking components of hood
- Rear lid
- Tools
- Aluminum hinge and hydraulic unit, assembly overview
- Hydraulic unit, removing and installing
- Steel hinge, assembly overview
- Gas-filled strut, removing
- Releasing gas from strut
- Rear lid, adjusting
- Basic setting of rear lid
- End plate, adjusting with lock cover removed
- End plate, adjusting with lock cover installed
- Damper, adjusting
- Lock parts with servo lid opening
- Lock parts with basic lid opening
- Fuel flap unit
- 57 Front doors, Central locking system
- Contact corrosion!
- Front door
- Tools
- Front door, assembly overview
- Door, removing and installing
- Door, adjusting
- Striker pin, adjusting
- Door handle and door lock, assembly overview
- Lock cylinder housing, removing and installing
- Door handle, removing and installing
- Door handle with cable routing (Keyless entry)
- Door lock, removing and installing
- Door Closing Assist Motor V278, assembly overview
- Door seals
- Inner door seal, removing and installing
- Outer door seal, removing and installing
- Door insulation, component location
- Door insulation, installing and removing
- Adaptation of ignition keys with radio-frequency remote control
- Batteries for the main key (foldable) with radio-frequency remote control, removing and installing
- Batteries for main key (foldable) with radio-frequency remote control (01.04 ), assembly overview
- Batteries for main key (foldable) with radio-frequency remote control (01.04 ), removing and installing
- 58 Rear doors, Window regulators
- Contact corrosion!
- Rear door
- Tools
- Rear door, assembly overview
- Door, removing and installing
- Door, adjusting
- Striker pin, adjusting
- Door handle and door lock, assembly overview
- Door handle, removing and installing
- Door handle with cable routing (Keyless entry)
- Door lock, removing and installing
- Door Closing Assist Motor V278, assembly overview
- Door seals
- Inner door seal, removing and installing
- Outer door seal, removing and installing
- Door insulation, component location
- Door insulation, installing
- 60 Sunroof
- Sliding/tilting sunroof with glass panel
- Tools
- Function
- Assembly overview
- Glass panel for sliding/tilting sunroof, removing
- Glass panel for sliding/tilting sunroof, installing
- Glass panel for sliding/tilting sunroof, adjusting (height adjustment)
- Parallel movement of glass panel, checking
- Parallel movement of glass panel, adjusting
- Panel seal, replacing
- Wind deflector, removing and installing
- Wind deflector, adjusting
- Sunroof shade, removing and installing
- Parallel movement of sunroof shade, adjusting
- Sunroof drive motor, removing and installing
- Drive motor for sliding/tilting sunroof, adjusting (zero position)
- Drive motor for sunroof shade, removing and installing
- Drive motor for wind deflector, removing and installing
- Automatic rotary switch for sunroof, removing and installing
- Sunroof shade switches, removing
- Assembly unit, removing and installing
- Operation without electricity
- Water drain hoses, cleaning
- Sunroof, adapting components
- Sunroof, coding
- Sliding/tilting sunroof with solar panel
- Tools
- Function
- Assembly overview
- Solar panel for sliding/tilting sunroof, removing
- Solar panel for sliding/tilting sunroof, installing
- Solar panel for sliding/tilting sunroof, adjusting (height adjustment)
- Parallel movement of solar panel, checking
- Parallel movement of solar panel, adjusting
- Panel seal, replacing
- Wind deflector, removing and installing
- Wind deflector, adjusting
- Trim for solar panel, removing and installing
- Sunroof drive motor, removing and installing
- Drive motor for sliding/tilting sunroof, adjusting (zero position)
- Drive motor for wind deflector, removing and installing
- Automatic rotary switch for sunroof, removing and installing
- DC converter, removing and installing
- Solar contact, removing
- Assembly unit, removing and installing
- Operation without electricity
- Water drain hoses, cleaning
- Sunroof, adapting components
- Sunroof, coding
- Sliding/tilting sunroof with glass panel
- 63 Bumpers
- Front bumper
- Bumper cover, repairing
- Tools
- Bumper cover, assembly overview
- Bumper cover, removing and installing
- Front bumper attachments
- Front bumper, substructure
- Installation notes for Right Distance Regulation Sensor G259
- Automatic distance regulation (ADR) sensor, removing and installing
- Cover piece, removing and installing
- Rear bumper
- Front bumper
- 64 Glass, Windows
- Flush bonded windows
- Tools
- Materials
- Windshield, repairing
- Windshield, assembly overview
- Plenum chamber cover, removing and installing
- Windshield, removing
- Windshield, installing
- New windshield with viewing window for VIN for vehicles without VIN, preparing
- Rear window, assembly overview
- Undamaged rear window, removing
- Rear window, installing
- Preparing old undamaged window for glazing
- Preparing new window for glazing
- Preparing window flange for glazing
- Installation notes
- Minimum curing time
- Repairing paint damage
- Cleaning when soiled by adhesive sealing material
- Front door window
- Rear door window
- Flush bonded windows
- 66 Exterior equipment
- Wheel housing liner, removing and installing
- Rearview mirror
- Radiator grille
- Roof moldings
- Protective moldings
- Sill panel trim
- 50 Body - Front
- Body Interior
- 68 - Interior equipment
- Rearview mirror
- Storage compartments, covers and trim
- Tools
- Center console (4-seater), removing and installing
- Center console (5-seater), removing and installing
- Front ashtray unit, removing and installing
- Storage compartment (front) in center console (4-seater), removing and installing
- Storage compartment (rear) in center console (4-seater), removing and installing
- Cup holder, removing and installing
- Footwell cover (passenger side), removing and installing
- Glove compartment, removing and installing
- Footwell cover (driver side), removing and installing
- Fuse panel cover (driver side), removing and installing
- Instrument panel side covers, removing and installing
- Sun visor, removing and installing
- Grab handles
- 69 - Passenger protection - Airbags, Seat belts
- Seat belts
- Tools
- Safety precautions for belt tensioners
- Disposing of belt tensioner units
- Front seat belt with two belt retractors, removing and installing
- Front seat belt, removing and installing
- Belt height adjuster (electrical), removing and installing
- Belt height adjuster (mechanical), removing and installing
- Front seat belt latch, removing and installing
- Multi-part locking tongue, detaching
- Shoulder and lap belt, connecting
- Rear seat belts (4-seater), removing and installing
- Rear outer seat belts (5-seater), removing and installing
- Rear middle seat belt (5-seater), removing and installing
- Rear belt latch (4-seater), removing and installing
- Rear belt latches (5-seater), removing and installing
- Seat belts, inspecting
- Inspecting child seat anchors (LATCH system Lower Anchors and Tethers for CHildren), after accident
- Airbag
- Location overview: Airbag components
- Safety precautions for work on airbags
- Disposal of airbag units
- Airbag units, deploying prior to disposal
- Airbag units, replacing after an accident
- Airbag control module -J234-, removing and installing
- Driver airbag unit, removing and installing
- Driver airbag unit mounting plate, removing and installing
- Steering wheel, removing and installing
- Passengers side airbag unit, removing and installing
- Side airbags for driver and front passenger, removing and installing
- Driver and passenger side head curtain airbags, removing and installing
- Rear side airbag, removing and installing
- Passenger Occupant Detection System (PODS) (USA only), removing and installing
- Components, adapting
- Crash sensors
- Seat belts
- 70 - Interior trim
- Instrument panel, removing and installing
- Door trim
- Sun shades
- Pillar trim
- Upper A-pillar trim, removing and installing
- Passenger side lower A-pillar trim, removing and installing
- Driver side lower A-pillar trim, removing and installing
- Upper B-pillar trim, removing and installing
- Lower B-pillar trim, removing and installing
- Upper C-pillar trim, removing and installing
- Lower C-pillar trim, removing and installing
- Wheel house trim, removing and installing
- Rear shelf
- Luggage compartment trim
- Roof trim
- 72 - Seat - Frames
- Front seats
- Tools
- Front seat, removing and installing
- Seat trim, removing and installing
- Seat switch assembly, removing and installing
- Seat control module, removing and installing
- Seat longitudinal adjuster, removing and installing
- Drive motor for seat longitudinal adjuster, removing and installing
- Seat inclination adjuster, removing and installing
- Seat height adjuster, removing and installing
- Seat backrest, removing and installing
- Lumbar support, removing and installing
- Seat backrest panel, 18/16-position seat, removing and installing
- Seat backrest panel, 12-way seat, removing and installing
- Seat headrest, removing and installing
- Rear seats
- Tools
- Rear seat cushions, 10-position seat, removing and installing
- Rear seat backrest, 10-position seat, removing and installing
- Seat frame, 10-position seat, removing and installing
- Control module, 10-position seat, removing and installing
- Headrest, 10-position seat, removing and installing
- Rear seat cushion, 5-seater, removing and installing
- Rear seat backrest, 5-seater, removing and installing
- Front seats
- 74 - Seats - Upholstery, Covers
- Front seat covers and upholstery
- Rear seat covers and upholstery
- Tools
- Rear seat cushion cover and padding, 10-position seat, removing and installing
- Rear seat backrest cover and padding, 10-position seat, removing and installing
- Center armrest, 4-seater, removing and installing
- Rear seat cushion cover and padding, 5-seater, removing and installing
- Rear seat backrest cover and padding, 5-seater, removing and installing
- Center armrest, 5-seater, removing and installing
- Cupholder in center armrest, 5-seater, removing and installing
- Center headrest, 5-seater, removing and installing
- Rear seat heating elements, replacing
- 76 - Gas, water, electricity
- 68 - Interior equipment
- Body Exterior
- Interior/Illumination Lights
- Electrical Equipment
- 27 - Battery, Starter, Generator, Cruise control
- Battery
- Battery, checking
- Battery, charging
- Battery, disconnecting and reconnecting
- Battery, disconnecting and reconnecting
- Battery (vehicles with two-battery concept), disconnecting and connecting
- Notes
- Battery disconnecting and reconnecting sequence
- Disconnecting battery in luggage compartment, right
- Disconnecting second battery in luggage compartment, left
- Batteries, reconnecting sequence
- Connecting second battery in luggage compartment, left
- Connecting battery in luggage compartment, right
- Work steps required after reconnecting battery
- Battery - vehicles with electric closing assist, disconnecting and connecting
- Battery, removing and installing
- Battery cut-out relay J7 , removing and installing
- Battery cut-off
- Battery monitoring control module J367 , removing and installing
- Tightening Torques: Battery
- Starter
- Tightening Torques: Starter
- Generator, removing and installing
- Generator, removing and installing
- Generator features
- Ribbed belt, checking
- Generator (8-cyl. Gasoline engine), assembly overview
- Generator (8-cyl. gasoline engine), removing and installing
- Generator, 12-cyl. Gasoline engine
- Generator (12-cyl. gasoline engine), removing and installing
- Generator ribbed belt pulley, removing and installing
- Tightening Torques: Generator
- Adaptive Cruise Control (ACC)
- Cruise control system (CCS), removing and installing
- 90 - Instruments
- Instrument cluster
- Service interval indicator
- 92 - Windshield wiper and washer system
- Front windshield wiper system
- Front windshield wiper system
- General information
- Front windshield wiper system, removing and installing
- Notes
- Front windshield wiper system, removing
- Wiper arms, removing
- Plenum chamber cover, removing
- Cowl, removing
- Drivers side wiper frame, installing
- Left wiper frame, removing
- Removing wiper motor from left wiper frame
- Installing wiper motor into left wiper frame
- Right wiper frame, removing
- Removing wiper motor from wiper frame
- Installing wiper motor into right wiper frame
- Rest position of windshield wiper blades, adjusting
- Aero wipers, removing and installing
- Rain sensor G213 , removing and installing
- Windshield washer system
- Windshield washer system
- Front windshield washer system - assembly overview
- Washer fluid reservoir, removing and installing
- Windshield Washer Pump V5 , removing and installing
- Windshield Washer Fluid Level Sensor G33 , removing and installing
- Washer nozzles for front windshield washer system, removing and installing
- Spray jets for front windshield washer system, checking
- Headlamp cleaning system
- Washer Hose Couplings
- Washer hoses, repairing
- Tightening Torques: Windshield wiper and washer system
- 94 - Lights, Switches - Exterior
- Headlight with one gas-discharge bulb
- Headlight with one gas-discharge bulb
- Main headlamp with one gas-discharge bulb, assembly overview
- Main headlamp, removing and installing
- Correcting installation position of headlamp
- Bulbs for main headlamps with one gas discharge bulb, replacing
- Automatic headlamp range control adjusting motor, removing and installing
- Removing and installing Headlamp Range Control Module
- Level control system sensor, removing and installing
- Headlight range control module, coding
- Main headlamp, adjusting
- Main headlamp with two gas-discharge bulbs
- Main headlamp with two gas-discharge bulbs
- Main headlamp with two gas-discharge bulbs, assembly overview
- Main headlamp, removing and installing
- Correcting installation position of headlamp
- Bulbs for main headlamps with two gas discharge bulbs, replacing
- Automatic headlamp range control adjusting motor, removing and installing
- Removing and installing Headlamp Range Control Module
- HID lamp high beam control module, removing and installing
- Level control system sensor, removing and installing
- Headlight range control module, coding
- Main headlamp, adjusting
- Fog lamps
- Mirror turn signals and entry lights in exterior mirror
- Taillamps
- Taillamps
- Taillamp assembly in side panel - assembly overview
- Taillight in rear lid, assembly overview
- Taillamp assembly in side panel, removing and installing
- Tail light assembly in luggage compartment lid, removing and installing
- Back-up light, removing and installing
- Gap dimensions of taillamp assemblies
- Rear light function, checking
- License Plate Lights
- High-Mount Brake Light
- Steering column switch
- Access/start authorization
- Access/start authorization
- Emergency release
- Access/Start Authorization Switch E415
- Access/Start Authorization Button E408
- Access/Start Control Module J518
- Access/start authorization antennas, assembly overview
- Access/start authorization antennas, removing and installing
- Notes
- Drivers Access/Start Authorization Antenna R134 , removing and installing
- Front Passengers Access/Start Authorization Antenna R135 , removing and installing
- Access/Start Authorization Antenna (in rear bumper) R136
- Luggage Compartment Access/Start Authorization Antenna R137 , removing and installing
- Interior Access/Start Authorization Antenna 1 R138 , removing and installing
- Interior Access/Start Authorization Antenna 2 R139 , removing and installing
- Interior Access/Start Authorization Antenna 3 R154 , removing and installing
- Antenna for Access/Start Authorization, checking
- Notes
- Checking Drivers Access/Start Authorization Antenna R134
- Checking Front Passengers Access/Start Authorization Antenna R135
- Checking Access/Start Authorization Antenna (in rear bumper) R136
- Checking Luggage Compartment Access/Start Authorization Antenna R137
- Checking Interior Access/Start Authorization Antenna 1 R138
- Checking Interior Access/Start Authorization Antenna 2 R139
- Checking Interior Access/Start Authorization Antenna 3 R154
- Antenna for Access/Start Authorization, tightening torques
- Parking aid
- Parking aid
- General information
- Parking assistance system - assembly overview
- Parking Aid Control Module J446 , removing and installing
- Front parking aid sensor, removing and installing
- Rear parking aid sensor, removing and installing
- Front parking aid display, removing and installing
- Rear parking aid display, removing
- Front side marker lamp, removing and installing
- Front windshield wiper system
- 96 - Lights, Switches - Interior, Anti-theft
- Interior lights and switches
- Lights and switches in the instrument panel
- Lights and switches in the instrument panel
- Light Switch E1 , removing and installing
- Instrument panel light dimmer switch E20 and trip odometer reset switch E123 , removing and installing
- Rear window shade switch E149 and parking aid button E266 , removing and installing
- Glove Compartment Light W6 , removing and installing
- Glove Compartment Lamp Switch E26 , removing and installing
- Steering Column Adjustment Switch E167 , removing and installing
- Footwell lights , removing and installing
- Front Doors - Lights and Switches
- Front Doors - Lights and Switches
- Central switch for window regulator, in drivers door E189 , switch for rear lid remote control lock E233 , and fuel tank lid unlock button E319 , removing and installing
- Right front window switch E41 , removing and installing
- Front Interior Locking Button E308 and E309 , removing and installing
- Front Door Opener Illumination L108 and L109 , removing and installing
- Front door contact switch, removing and installing
- Front Entry Light W31 and W32 , removing and installing
- Door Warning Light W30 and W36 , removing and installing
- Rear Doors - Lights and Switches
- Rear Doors - Lights and Switches
- Rear Window Switch E52 and E54 , removing and installing
- Rear Interior Locking Button E310 and E311 , removing and installing
- Rear Door Opener Illumination L110 and L111 , removing and installing
- Rear door contact switch, removing and installing
- Rear Entry Light W33 and W34 , removing and installing
- Rear Door Warning Light W37 and W38 , removing and installing
- Luggage Compartment - Lights and Switches
- Headliner - Lights and Switches
- Headliner - Lights and Switches
- Front interior light W1 , removing and installing
- Map/Reading Light W19 and W13 , removing and installing
- Sunroof Switch E8 , removing and installing
- Rear interior and reading lights, removing and installing
- Rear Interior Lamp Button E327 and E329 , removing and installing
- Removing and installing garage door opener
- Switch panel in roof module, removing and installing
- Center Console - Lights and Switches
- Center Console - Lights and Switches
- Mirror adjustment switch E43 with mirror selector switch E48 , removing and installing
- Access/start authorization button E408 , removing and installing
- Switch panel for front seat heating/ventilation with buttons for dampening, ESP, and level control in the center console, removing and installing
- Switch panel for rear seat position and heating/ventilation memory (4-seater), removing and installing
- Switch panel for rear seat adjustment (4-seater), removing and installing
- Switch panel for rear seat lumbar adjustment (5-seater), removing and installing
- Other electrical components
- 97 - Wiring
- Vehicle Diagnostic, Testing and Information Systems
- Fuse holder, relay panel, E-boxes and control modules, removing and installing
- Fuse holder, relay panel, E-boxes and control modules, removing and installing
- Fuse holder under the instrument panel, left, removing and installing
- Auxiliary fuse box in luggage compartment, left, removing and installing
- Thermal fuse box on driver side, removing and installing
- E-box in luggage compartment, left, removing and installing
- E-box in plenum chamber, right, removing and installing
- Relay carrier in right front footwell, removing and installing
- Vehicle electrical system control module, replacing
- Vehicle electrical system control module, removing and installing
- Roof electronics control module, removing and installing
- Wiring Harnesses and Connectors, Repairing
- 27 - Battery, Starter, Generator, Cruise control
- Electrical Equipment - General Information
- 27 - Battery, Starter, Generator, Cruise Control
- 90 - Instruments
- 92 - Windshield Wiper and Washer system
- 94 - Lights, Switches - Exterior
- 96 - Lights, Switches - Interior, Anti-theft
- 97 - Wiring
- Vehicle Diagnostic, Testing and Information Systems
- Wiring Harnesses and Connectors, Repairing
- Connector Repair Set VAS 6410
- Electrical Equipment
- Mirrors
- Body Interior
- 68 - Interior equipment
- Rearview mirror
- Storage compartments, covers and trim
- Tools
- Center console (4-seater), removing and installing
- Center console (5-seater), removing and installing
- Front ashtray unit, removing and installing
- Storage compartment (front) in center console (4-seater), removing and installing
- Storage compartment (rear) in center console (4-seater), removing and installing
- Cup holder, removing and installing
- Footwell cover (passenger side), removing and installing
- Glove compartment, removing and installing
- Footwell cover (driver side), removing and installing
- Fuse panel cover (driver side), removing and installing
- Instrument panel side covers, removing and installing
- Sun visor, removing and installing
- Grab handles
- 69 - Passenger protection - Airbags, Seat belts
- Seat belts
- Tools
- Safety precautions for belt tensioners
- Disposing of belt tensioner units
- Front seat belt with two belt retractors, removing and installing
- Front seat belt, removing and installing
- Belt height adjuster (electrical), removing and installing
- Belt height adjuster (mechanical), removing and installing
- Front seat belt latch, removing and installing
- Multi-part locking tongue, detaching
- Shoulder and lap belt, connecting
- Rear seat belts (4-seater), removing and installing
- Rear outer seat belts (5-seater), removing and installing
- Rear middle seat belt (5-seater), removing and installing
- Rear belt latch (4-seater), removing and installing
- Rear belt latches (5-seater), removing and installing
- Seat belts, inspecting
- Inspecting child seat anchors (LATCH system Lower Anchors and Tethers for CHildren), after accident
- Airbag
- Location overview: Airbag components
- Safety precautions for work on airbags
- Disposal of airbag units
- Airbag units, deploying prior to disposal
- Airbag units, replacing after an accident
- Airbag control module -J234-, removing and installing
- Driver airbag unit, removing and installing
- Driver airbag unit mounting plate, removing and installing
- Steering wheel, removing and installing
- Passengers side airbag unit, removing and installing
- Side airbags for driver and front passenger, removing and installing
- Driver and passenger side head curtain airbags, removing and installing
- Rear side airbag, removing and installing
- Passenger Occupant Detection System (PODS) (USA only), removing and installing
- Components, adapting
- Crash sensors
- Seat belts
- 70 - Interior trim
- Instrument panel, removing and installing
- Door trim
- Sun shades
- Pillar trim
- Upper A-pillar trim, removing and installing
- Passenger side lower A-pillar trim, removing and installing
- Driver side lower A-pillar trim, removing and installing
- Upper B-pillar trim, removing and installing
- Lower B-pillar trim, removing and installing
- Upper C-pillar trim, removing and installing
- Lower C-pillar trim, removing and installing
- Wheel house trim, removing and installing
- Rear shelf
- Luggage compartment trim
- Roof trim
- 72 - Seat - Frames
- Front seats
- Tools
- Front seat, removing and installing
- Seat trim, removing and installing
- Seat switch assembly, removing and installing
- Seat control module, removing and installing
- Seat longitudinal adjuster, removing and installing
- Drive motor for seat longitudinal adjuster, removing and installing
- Seat inclination adjuster, removing and installing
- Seat height adjuster, removing and installing
- Seat backrest, removing and installing
- Lumbar support, removing and installing
- Seat backrest panel, 18/16-position seat, removing and installing
- Seat backrest panel, 12-way seat, removing and installing
- Seat headrest, removing and installing
- Rear seats
- Tools
- Rear seat cushions, 10-position seat, removing and installing
- Rear seat backrest, 10-position seat, removing and installing
- Seat frame, 10-position seat, removing and installing
- Control module, 10-position seat, removing and installing
- Headrest, 10-position seat, removing and installing
- Rear seat cushion, 5-seater, removing and installing
- Rear seat backrest, 5-seater, removing and installing
- Front seats
- 74 - Seats - Upholstery, Covers
- Front seat covers and upholstery
- Rear seat covers and upholstery
- Tools
- Rear seat cushion cover and padding, 10-position seat, removing and installing
- Rear seat backrest cover and padding, 10-position seat, removing and installing
- Center armrest, 4-seater, removing and installing
- Rear seat cushion cover and padding, 5-seater, removing and installing
- Rear seat backrest cover and padding, 5-seater, removing and installing
- Center armrest, 5-seater, removing and installing
- Cupholder in center armrest, 5-seater, removing and installing
- Center headrest, 5-seater, removing and installing
- Rear seat heating elements, replacing
- 76 - Gas, water, electricity
- 68 - Interior equipment
- Body Interior
- Seats
- Body Interior
- 68 - Interior equipment
- Rearview mirror
- Storage compartments, covers and trim
- Tools
- Center console (4-seater), removing and installing
- Center console (5-seater), removing and installing
- Front ashtray unit, removing and installing
- Storage compartment (front) in center console (4-seater), removing and installing
- Storage compartment (rear) in center console (4-seater), removing and installing
- Cup holder, removing and installing
- Footwell cover (passenger side), removing and installing
- Glove compartment, removing and installing
- Footwell cover (driver side), removing and installing
- Fuse panel cover (driver side), removing and installing
- Instrument panel side covers, removing and installing
- Sun visor, removing and installing
- Grab handles
- 69 - Passenger protection - Airbags, Seat belts
- Seat belts
- Tools
- Safety precautions for belt tensioners
- Disposing of belt tensioner units
- Front seat belt with two belt retractors, removing and installing
- Front seat belt, removing and installing
- Belt height adjuster (electrical), removing and installing
- Belt height adjuster (mechanical), removing and installing
- Front seat belt latch, removing and installing
- Multi-part locking tongue, detaching
- Shoulder and lap belt, connecting
- Rear seat belts (4-seater), removing and installing
- Rear outer seat belts (5-seater), removing and installing
- Rear middle seat belt (5-seater), removing and installing
- Rear belt latch (4-seater), removing and installing
- Rear belt latches (5-seater), removing and installing
- Seat belts, inspecting
- Inspecting child seat anchors (LATCH system Lower Anchors and Tethers for CHildren), after accident
- Airbag
- Location overview: Airbag components
- Safety precautions for work on airbags
- Disposal of airbag units
- Airbag units, deploying prior to disposal
- Airbag units, replacing after an accident
- Airbag control module -J234-, removing and installing
- Driver airbag unit, removing and installing
- Driver airbag unit mounting plate, removing and installing
- Steering wheel, removing and installing
- Passengers side airbag unit, removing and installing
- Side airbags for driver and front passenger, removing and installing
- Driver and passenger side head curtain airbags, removing and installing
- Rear side airbag, removing and installing
- Passenger Occupant Detection System (PODS) (USA only), removing and installing
- Components, adapting
- Crash sensors
- Seat belts
- 70 - Interior trim
- Instrument panel, removing and installing
- Door trim
- Sun shades
- Pillar trim
- Upper A-pillar trim, removing and installing
- Passenger side lower A-pillar trim, removing and installing
- Driver side lower A-pillar trim, removing and installing
- Upper B-pillar trim, removing and installing
- Lower B-pillar trim, removing and installing
- Upper C-pillar trim, removing and installing
- Lower C-pillar trim, removing and installing
- Wheel house trim, removing and installing
- Rear shelf
- Luggage compartment trim
- Roof trim
- 72 - Seat - Frames
- Front seats
- Tools
- Front seat, removing and installing
- Seat trim, removing and installing
- Seat switch assembly, removing and installing
- Seat control module, removing and installing
- Seat longitudinal adjuster, removing and installing
- Drive motor for seat longitudinal adjuster, removing and installing
- Seat inclination adjuster, removing and installing
- Seat height adjuster, removing and installing
- Seat backrest, removing and installing
- Lumbar support, removing and installing
- Seat backrest panel, 18/16-position seat, removing and installing
- Seat backrest panel, 12-way seat, removing and installing
- Seat headrest, removing and installing
- Rear seats
- Tools
- Rear seat cushions, 10-position seat, removing and installing
- Rear seat backrest, 10-position seat, removing and installing
- Seat frame, 10-position seat, removing and installing
- Control module, 10-position seat, removing and installing
- Headrest, 10-position seat, removing and installing
- Rear seat cushion, 5-seater, removing and installing
- Rear seat backrest, 5-seater, removing and installing
- Front seats
- 74 - Seats - Upholstery, Covers
- Front seat covers and upholstery
- Rear seat covers and upholstery
- Tools
- Rear seat cushion cover and padding, 10-position seat, removing and installing
- Rear seat backrest cover and padding, 10-position seat, removing and installing
- Center armrest, 4-seater, removing and installing
- Rear seat cushion cover and padding, 5-seater, removing and installing
- Rear seat backrest cover and padding, 5-seater, removing and installing
- Center armrest, 5-seater, removing and installing
- Cupholder in center armrest, 5-seater, removing and installing
- Center headrest, 5-seater, removing and installing
- Rear seat heating elements, replacing
- 76 - Gas, water, electricity
- 68 - Interior equipment
- Body Interior
- Steering Column Switches
- Communication
- 91 - Communication
- Communication systems
- Front Information Display Control Head Control Module
- General notes
- Troubleshooting
- Front Information Display Control Head Control Module, removing and installing
- Front Information Display Control Head Control Module, multi-pin harness connectors, overview
- Notes
- 32-pin multi-pin harness connector 1 of Front Information Display Control Head Control Module
- 4-pin multi-pin harness connector 2 of Front Information Display Control Head Control Module
- 2-pin multi-pin harness connector 3 of Front Information Display Control Head Control Module
- 20-pin multi-pin harness connector 4 of Front Information Display Control Head Control Module
- 8-pin multi-pin harness connector 5 of Front Information Display Control Head Control Module
- 8-pin multi-pin harness connector 6 of Front Information Display Control Head Control Module
- Harness connectors 7 and 8, antenna connections of Front Information Display Control Head Control Module
- Fiber-optic cable, replacing
- Notes
- Important notes
- Fiber-optic cable between Navigation System with CD Drive Control Module and Front Information Display Control Head Control Module , replacing
- Fiber-optic cable between Navigation System with CD Drive Control Module , Front Information Display Control Head Control Module and Rear Information Display Control Head , replacing
- Checking and erasing DTC memory after replacing fiber-optic cable
- Communications system, adapting components
- Sound systems Standard and Upgrade
- Analog tuner for television reception (TV)
- Digital TV tuner for digital TV (DVB-T)
- Control module for navigation with CD-mechanism
- Multimedia system (Rear Seat DVD)
- General notes
- Multimedia system, overview
- Connector assignments on system components
- Relays and fuses for multimedia system
- Multimedia DVD changer, removing and installing
- Control head control module, removing and installing
- Multimedia control module, removing and installing
- Multimedia control head, removing and installing
- Additional connection for audio and video, removing and installing
- Telematics system (only for USA)
- CD Changer
- Speaker system
- General description
- Speaker system, overview
- Front bass speakers, removing and installing
- Front mid-bass speaker, removing and installing
- Front mid-range speakers, removing and installing
- Front treble speakers, removing and installing
- Rear bass speakers, removing and installing
- Rear mid-range speaker, removing and installing
- Antenna systems
- Telephone system
- General notes
- Troubleshooting
- Telephone system, overview
- Telephone/Telematics Control Module or Operating Electronics and Telephone Control Module, removing and installing
- Multi-pin harness connectors on Telephone/Telematics Control Module J526
- Telephone Microphone, removing and installing
- Telephone mounting bracket, removing and installing
- Second wireless telephone with cellular telephone (pairing process), adapting
- Multi-function steering wheel
- Cellular telephone and two-way radios, operation notes
- General notes
- Cellular phones and portable two-way radios may not be used in the vehicle without a separate external antenna.
- Installation and operation of two-way radios with a transmitted output above 10 watts for the radio communication services listed in the table is only permitted regarding the following prerequisites:
- Performing repairs, notes
- Battery, transmitter/receiver unit, fuse and wiring harness, overview
- Transmitted output and antenna installation locations
- General notes
- Reception interference suppression measures
- 91 - Communication
- Electrical Equipment
- 27 - Battery, Starter, Generator, Cruise control
- Battery
- Battery, checking
- Battery, charging
- Battery, disconnecting and reconnecting
- Battery, disconnecting and reconnecting
- Battery (vehicles with two-battery concept), disconnecting and connecting
- Notes
- Battery disconnecting and reconnecting sequence
- Disconnecting battery in luggage compartment, right
- Disconnecting second battery in luggage compartment, left
- Batteries, reconnecting sequence
- Connecting second battery in luggage compartment, left
- Connecting battery in luggage compartment, right
- Work steps required after reconnecting battery
- Battery - vehicles with electric closing assist, disconnecting and connecting
- Battery, removing and installing
- Battery cut-out relay J7 , removing and installing
- Battery cut-off
- Battery monitoring control module J367 , removing and installing
- Tightening Torques: Battery
- Starter
- Tightening Torques: Starter
- Generator, removing and installing
- Generator, removing and installing
- Generator features
- Ribbed belt, checking
- Generator (8-cyl. Gasoline engine), assembly overview
- Generator (8-cyl. gasoline engine), removing and installing
- Generator, 12-cyl. Gasoline engine
- Generator (12-cyl. gasoline engine), removing and installing
- Generator ribbed belt pulley, removing and installing
- Tightening Torques: Generator
- Adaptive Cruise Control (ACC)
- Cruise control system (CCS), removing and installing
- 90 - Instruments
- Instrument cluster
- Service interval indicator
- 92 - Windshield wiper and washer system
- Front windshield wiper system
- Front windshield wiper system
- General information
- Front windshield wiper system, removing and installing
- Notes
- Front windshield wiper system, removing
- Wiper arms, removing
- Plenum chamber cover, removing
- Cowl, removing
- Drivers side wiper frame, installing
- Left wiper frame, removing
- Removing wiper motor from left wiper frame
- Installing wiper motor into left wiper frame
- Right wiper frame, removing
- Removing wiper motor from wiper frame
- Installing wiper motor into right wiper frame
- Rest position of windshield wiper blades, adjusting
- Aero wipers, removing and installing
- Rain sensor G213 , removing and installing
- Windshield washer system
- Windshield washer system
- Front windshield washer system - assembly overview
- Washer fluid reservoir, removing and installing
- Windshield Washer Pump V5 , removing and installing
- Windshield Washer Fluid Level Sensor G33 , removing and installing
- Washer nozzles for front windshield washer system, removing and installing
- Spray jets for front windshield washer system, checking
- Headlamp cleaning system
- Washer Hose Couplings
- Washer hoses, repairing
- Tightening Torques: Windshield wiper and washer system
- 94 - Lights, Switches - Exterior
- Headlight with one gas-discharge bulb
- Headlight with one gas-discharge bulb
- Main headlamp with one gas-discharge bulb, assembly overview
- Main headlamp, removing and installing
- Correcting installation position of headlamp
- Bulbs for main headlamps with one gas discharge bulb, replacing
- Automatic headlamp range control adjusting motor, removing and installing
- Removing and installing Headlamp Range Control Module
- Level control system sensor, removing and installing
- Headlight range control module, coding
- Main headlamp, adjusting
- Main headlamp with two gas-discharge bulbs
- Main headlamp with two gas-discharge bulbs
- Main headlamp with two gas-discharge bulbs, assembly overview
- Main headlamp, removing and installing
- Correcting installation position of headlamp
- Bulbs for main headlamps with two gas discharge bulbs, replacing
- Automatic headlamp range control adjusting motor, removing and installing
- Removing and installing Headlamp Range Control Module
- HID lamp high beam control module, removing and installing
- Level control system sensor, removing and installing
- Headlight range control module, coding
- Main headlamp, adjusting
- Fog lamps
- Mirror turn signals and entry lights in exterior mirror
- Taillamps
- Taillamps
- Taillamp assembly in side panel - assembly overview
- Taillight in rear lid, assembly overview
- Taillamp assembly in side panel, removing and installing
- Tail light assembly in luggage compartment lid, removing and installing
- Back-up light, removing and installing
- Gap dimensions of taillamp assemblies
- Rear light function, checking
- License Plate Lights
- High-Mount Brake Light
- Steering column switch
- Access/start authorization
- Access/start authorization
- Emergency release
- Access/Start Authorization Switch E415
- Access/Start Authorization Button E408
- Access/Start Control Module J518
- Access/start authorization antennas, assembly overview
- Access/start authorization antennas, removing and installing
- Notes
- Drivers Access/Start Authorization Antenna R134 , removing and installing
- Front Passengers Access/Start Authorization Antenna R135 , removing and installing
- Access/Start Authorization Antenna (in rear bumper) R136
- Luggage Compartment Access/Start Authorization Antenna R137 , removing and installing
- Interior Access/Start Authorization Antenna 1 R138 , removing and installing
- Interior Access/Start Authorization Antenna 2 R139 , removing and installing
- Interior Access/Start Authorization Antenna 3 R154 , removing and installing
- Antenna for Access/Start Authorization, checking
- Notes
- Checking Drivers Access/Start Authorization Antenna R134
- Checking Front Passengers Access/Start Authorization Antenna R135
- Checking Access/Start Authorization Antenna (in rear bumper) R136
- Checking Luggage Compartment Access/Start Authorization Antenna R137
- Checking Interior Access/Start Authorization Antenna 1 R138
- Checking Interior Access/Start Authorization Antenna 2 R139
- Checking Interior Access/Start Authorization Antenna 3 R154
- Antenna for Access/Start Authorization, tightening torques
- Parking aid
- Parking aid
- General information
- Parking assistance system - assembly overview
- Parking Aid Control Module J446 , removing and installing
- Front parking aid sensor, removing and installing
- Rear parking aid sensor, removing and installing
- Front parking aid display, removing and installing
- Rear parking aid display, removing
- Front side marker lamp, removing and installing
- Front windshield wiper system
- 96 - Lights, Switches - Interior, Anti-theft
- Interior lights and switches
- Lights and switches in the instrument panel
- Lights and switches in the instrument panel
- Light Switch E1 , removing and installing
- Instrument panel light dimmer switch E20 and trip odometer reset switch E123 , removing and installing
- Rear window shade switch E149 and parking aid button E266 , removing and installing
- Glove Compartment Light W6 , removing and installing
- Glove Compartment Lamp Switch E26 , removing and installing
- Steering Column Adjustment Switch E167 , removing and installing
- Footwell lights , removing and installing
- Front Doors - Lights and Switches
- Front Doors - Lights and Switches
- Central switch for window regulator, in drivers door E189 , switch for rear lid remote control lock E233 , and fuel tank lid unlock button E319 , removing and installing
- Right front window switch E41 , removing and installing
- Front Interior Locking Button E308 and E309 , removing and installing
- Front Door Opener Illumination L108 and L109 , removing and installing
- Front door contact switch, removing and installing
- Front Entry Light W31 and W32 , removing and installing
- Door Warning Light W30 and W36 , removing and installing
- Rear Doors - Lights and Switches
- Rear Doors - Lights and Switches
- Rear Window Switch E52 and E54 , removing and installing
- Rear Interior Locking Button E310 and E311 , removing and installing
- Rear Door Opener Illumination L110 and L111 , removing and installing
- Rear door contact switch, removing and installing
- Rear Entry Light W33 and W34 , removing and installing
- Rear Door Warning Light W37 and W38 , removing and installing
- Luggage Compartment - Lights and Switches
- Headliner - Lights and Switches
- Headliner - Lights and Switches
- Front interior light W1 , removing and installing
- Map/Reading Light W19 and W13 , removing and installing
- Sunroof Switch E8 , removing and installing
- Rear interior and reading lights, removing and installing
- Rear Interior Lamp Button E327 and E329 , removing and installing
- Removing and installing garage door opener
- Switch panel in roof module, removing and installing
- Center Console - Lights and Switches
- Center Console - Lights and Switches
- Mirror adjustment switch E43 with mirror selector switch E48 , removing and installing
- Access/start authorization button E408 , removing and installing
- Switch panel for front seat heating/ventilation with buttons for dampening, ESP, and level control in the center console, removing and installing
- Switch panel for rear seat position and heating/ventilation memory (4-seater), removing and installing
- Switch panel for rear seat adjustment (4-seater), removing and installing
- Switch panel for rear seat lumbar adjustment (5-seater), removing and installing
- Other electrical components
- 97 - Wiring
- Vehicle Diagnostic, Testing and Information Systems
- Fuse holder, relay panel, E-boxes and control modules, removing and installing
- Fuse holder, relay panel, E-boxes and control modules, removing and installing
- Fuse holder under the instrument panel, left, removing and installing
- Auxiliary fuse box in luggage compartment, left, removing and installing
- Thermal fuse box on driver side, removing and installing
- E-box in luggage compartment, left, removing and installing
- E-box in plenum chamber, right, removing and installing
- Relay carrier in right front footwell, removing and installing
- Vehicle electrical system control module, replacing
- Vehicle electrical system control module, removing and installing
- Roof electronics control module, removing and installing
- Wiring Harnesses and Connectors, Repairing
- 27 - Battery, Starter, Generator, Cruise control
- Communication
- Window Motors & Regulators
- Body Exterior
- 50 Body - Front
- Lock carrier
- Tools
- Electrical/electronic components and locations
- Lock carrier service position, assembly overview
- Service position
- Lock carrier with attachments, assembly overview
- Lock carrier with attachments, removing and installing
- Lock carrier attachments, assembly overview
- Installation note for longmember
- Installation notes for Right Distance Regulation Sensor G259
- Right Distance Regulation Sensor G259, removing and installing
- Fenders
- Noise insulation
- Lock carrier
- 55 Hood, Lids
- Contact corrosion!
- Hood
- Locking and unlocking components of hood
- Rear lid
- Tools
- Aluminum hinge and hydraulic unit, assembly overview
- Hydraulic unit, removing and installing
- Steel hinge, assembly overview
- Gas-filled strut, removing
- Releasing gas from strut
- Rear lid, adjusting
- Basic setting of rear lid
- End plate, adjusting with lock cover removed
- End plate, adjusting with lock cover installed
- Damper, adjusting
- Lock parts with servo lid opening
- Lock parts with basic lid opening
- Fuel flap unit
- 57 Front doors, Central locking system
- Contact corrosion!
- Front door
- Tools
- Front door, assembly overview
- Door, removing and installing
- Door, adjusting
- Striker pin, adjusting
- Door handle and door lock, assembly overview
- Lock cylinder housing, removing and installing
- Door handle, removing and installing
- Door handle with cable routing (Keyless entry)
- Door lock, removing and installing
- Door Closing Assist Motor V278, assembly overview
- Door seals
- Inner door seal, removing and installing
- Outer door seal, removing and installing
- Door insulation, component location
- Door insulation, installing and removing
- Adaptation of ignition keys with radio-frequency remote control
- Batteries for the main key (foldable) with radio-frequency remote control, removing and installing
- Batteries for main key (foldable) with radio-frequency remote control (01.04 ), assembly overview
- Batteries for main key (foldable) with radio-frequency remote control (01.04 ), removing and installing
- 58 Rear doors, Window regulators
- Contact corrosion!
- Rear door
- Tools
- Rear door, assembly overview
- Door, removing and installing
- Door, adjusting
- Striker pin, adjusting
- Door handle and door lock, assembly overview
- Door handle, removing and installing
- Door handle with cable routing (Keyless entry)
- Door lock, removing and installing
- Door Closing Assist Motor V278, assembly overview
- Door seals
- Inner door seal, removing and installing
- Outer door seal, removing and installing
- Door insulation, component location
- Door insulation, installing
- 60 Sunroof
- Sliding/tilting sunroof with glass panel
- Tools
- Function
- Assembly overview
- Glass panel for sliding/tilting sunroof, removing
- Glass panel for sliding/tilting sunroof, installing
- Glass panel for sliding/tilting sunroof, adjusting (height adjustment)
- Parallel movement of glass panel, checking
- Parallel movement of glass panel, adjusting
- Panel seal, replacing
- Wind deflector, removing and installing
- Wind deflector, adjusting
- Sunroof shade, removing and installing
- Parallel movement of sunroof shade, adjusting
- Sunroof drive motor, removing and installing
- Drive motor for sliding/tilting sunroof, adjusting (zero position)
- Drive motor for sunroof shade, removing and installing
- Drive motor for wind deflector, removing and installing
- Automatic rotary switch for sunroof, removing and installing
- Sunroof shade switches, removing
- Assembly unit, removing and installing
- Operation without electricity
- Water drain hoses, cleaning
- Sunroof, adapting components
- Sunroof, coding
- Sliding/tilting sunroof with solar panel
- Tools
- Function
- Assembly overview
- Solar panel for sliding/tilting sunroof, removing
- Solar panel for sliding/tilting sunroof, installing
- Solar panel for sliding/tilting sunroof, adjusting (height adjustment)
- Parallel movement of solar panel, checking
- Parallel movement of solar panel, adjusting
- Panel seal, replacing
- Wind deflector, removing and installing
- Wind deflector, adjusting
- Trim for solar panel, removing and installing
- Sunroof drive motor, removing and installing
- Drive motor for sliding/tilting sunroof, adjusting (zero position)
- Drive motor for wind deflector, removing and installing
- Automatic rotary switch for sunroof, removing and installing
- DC converter, removing and installing
- Solar contact, removing
- Assembly unit, removing and installing
- Operation without electricity
- Water drain hoses, cleaning
- Sunroof, adapting components
- Sunroof, coding
- Sliding/tilting sunroof with glass panel
- 63 Bumpers
- Front bumper
- Bumper cover, repairing
- Tools
- Bumper cover, assembly overview
- Bumper cover, removing and installing
- Front bumper attachments
- Front bumper, substructure
- Installation notes for Right Distance Regulation Sensor G259
- Automatic distance regulation (ADR) sensor, removing and installing
- Cover piece, removing and installing
- Rear bumper
- Front bumper
- 64 Glass, Windows
- Flush bonded windows
- Tools
- Materials
- Windshield, repairing
- Windshield, assembly overview
- Plenum chamber cover, removing and installing
- Windshield, removing
- Windshield, installing
- New windshield with viewing window for VIN for vehicles without VIN, preparing
- Rear window, assembly overview
- Undamaged rear window, removing
- Rear window, installing
- Preparing old undamaged window for glazing
- Preparing new window for glazing
- Preparing window flange for glazing
- Installation notes
- Minimum curing time
- Repairing paint damage
- Cleaning when soiled by adhesive sealing material
- Front door window
- Rear door window
- Flush bonded windows
- 66 Exterior equipment
- Wheel housing liner, removing and installing
- Rearview mirror
- Radiator grille
- Roof moldings
- Protective moldings
- Sill panel trim
- 50 Body - Front
- Electrical Equipment
- 27 - Battery, Starter, Generator, Cruise control
- Battery
- Battery, checking
- Battery, charging
- Battery, disconnecting and reconnecting
- Battery, disconnecting and reconnecting
- Battery (vehicles with two-battery concept), disconnecting and connecting
- Notes
- Battery disconnecting and reconnecting sequence
- Disconnecting battery in luggage compartment, right
- Disconnecting second battery in luggage compartment, left
- Batteries, reconnecting sequence
- Connecting second battery in luggage compartment, left
- Connecting battery in luggage compartment, right
- Work steps required after reconnecting battery
- Battery - vehicles with electric closing assist, disconnecting and connecting
- Battery, removing and installing
- Battery cut-out relay J7 , removing and installing
- Battery cut-off
- Battery monitoring control module J367 , removing and installing
- Tightening Torques: Battery
- Starter
- Tightening Torques: Starter
- Generator, removing and installing
- Generator, removing and installing
- Generator features
- Ribbed belt, checking
- Generator (8-cyl. Gasoline engine), assembly overview
- Generator (8-cyl. gasoline engine), removing and installing
- Generator, 12-cyl. Gasoline engine
- Generator (12-cyl. gasoline engine), removing and installing
- Generator ribbed belt pulley, removing and installing
- Tightening Torques: Generator
- Adaptive Cruise Control (ACC)
- Cruise control system (CCS), removing and installing
- 90 - Instruments
- Instrument cluster
- Service interval indicator
- 92 - Windshield wiper and washer system
- Front windshield wiper system
- Front windshield wiper system
- General information
- Front windshield wiper system, removing and installing
- Notes
- Front windshield wiper system, removing
- Wiper arms, removing
- Plenum chamber cover, removing
- Cowl, removing
- Drivers side wiper frame, installing
- Left wiper frame, removing
- Removing wiper motor from left wiper frame
- Installing wiper motor into left wiper frame
- Right wiper frame, removing
- Removing wiper motor from wiper frame
- Installing wiper motor into right wiper frame
- Rest position of windshield wiper blades, adjusting
- Aero wipers, removing and installing
- Rain sensor G213 , removing and installing
- Windshield washer system
- Windshield washer system
- Front windshield washer system - assembly overview
- Washer fluid reservoir, removing and installing
- Windshield Washer Pump V5 , removing and installing
- Windshield Washer Fluid Level Sensor G33 , removing and installing
- Washer nozzles for front windshield washer system, removing and installing
- Spray jets for front windshield washer system, checking
- Headlamp cleaning system
- Washer Hose Couplings
- Washer hoses, repairing
- Tightening Torques: Windshield wiper and washer system
- 94 - Lights, Switches - Exterior
- Headlight with one gas-discharge bulb
- Headlight with one gas-discharge bulb
- Main headlamp with one gas-discharge bulb, assembly overview
- Main headlamp, removing and installing
- Correcting installation position of headlamp
- Bulbs for main headlamps with one gas discharge bulb, replacing
- Automatic headlamp range control adjusting motor, removing and installing
- Removing and installing Headlamp Range Control Module
- Level control system sensor, removing and installing
- Headlight range control module, coding
- Main headlamp, adjusting
- Main headlamp with two gas-discharge bulbs
- Main headlamp with two gas-discharge bulbs
- Main headlamp with two gas-discharge bulbs, assembly overview
- Main headlamp, removing and installing
- Correcting installation position of headlamp
- Bulbs for main headlamps with two gas discharge bulbs, replacing
- Automatic headlamp range control adjusting motor, removing and installing
- Removing and installing Headlamp Range Control Module
- HID lamp high beam control module, removing and installing
- Level control system sensor, removing and installing
- Headlight range control module, coding
- Main headlamp, adjusting
- Fog lamps
- Mirror turn signals and entry lights in exterior mirror
- Taillamps
- Taillamps
- Taillamp assembly in side panel - assembly overview
- Taillight in rear lid, assembly overview
- Taillamp assembly in side panel, removing and installing
- Tail light assembly in luggage compartment lid, removing and installing
- Back-up light, removing and installing
- Gap dimensions of taillamp assemblies
- Rear light function, checking
- License Plate Lights
- High-Mount Brake Light
- Steering column switch
- Access/start authorization
- Access/start authorization
- Emergency release
- Access/Start Authorization Switch E415
- Access/Start Authorization Button E408
- Access/Start Control Module J518
- Access/start authorization antennas, assembly overview
- Access/start authorization antennas, removing and installing
- Notes
- Drivers Access/Start Authorization Antenna R134 , removing and installing
- Front Passengers Access/Start Authorization Antenna R135 , removing and installing
- Access/Start Authorization Antenna (in rear bumper) R136
- Luggage Compartment Access/Start Authorization Antenna R137 , removing and installing
- Interior Access/Start Authorization Antenna 1 R138 , removing and installing
- Interior Access/Start Authorization Antenna 2 R139 , removing and installing
- Interior Access/Start Authorization Antenna 3 R154 , removing and installing
- Antenna for Access/Start Authorization, checking
- Notes
- Checking Drivers Access/Start Authorization Antenna R134
- Checking Front Passengers Access/Start Authorization Antenna R135
- Checking Access/Start Authorization Antenna (in rear bumper) R136
- Checking Luggage Compartment Access/Start Authorization Antenna R137
- Checking Interior Access/Start Authorization Antenna 1 R138
- Checking Interior Access/Start Authorization Antenna 2 R139
- Checking Interior Access/Start Authorization Antenna 3 R154
- Antenna for Access/Start Authorization, tightening torques
- Parking aid
- Parking aid
- General information
- Parking assistance system - assembly overview
- Parking Aid Control Module J446 , removing and installing
- Front parking aid sensor, removing and installing
- Rear parking aid sensor, removing and installing
- Front parking aid display, removing and installing
- Rear parking aid display, removing
- Front side marker lamp, removing and installing
- Front windshield wiper system
- 96 - Lights, Switches - Interior, Anti-theft
- Interior lights and switches
- Lights and switches in the instrument panel
- Lights and switches in the instrument panel
- Light Switch E1 , removing and installing
- Instrument panel light dimmer switch E20 and trip odometer reset switch E123 , removing and installing
- Rear window shade switch E149 and parking aid button E266 , removing and installing
- Glove Compartment Light W6 , removing and installing
- Glove Compartment Lamp Switch E26 , removing and installing
- Steering Column Adjustment Switch E167 , removing and installing
- Footwell lights , removing and installing
- Front Doors - Lights and Switches
- Front Doors - Lights and Switches
- Central switch for window regulator, in drivers door E189 , switch for rear lid remote control lock E233 , and fuel tank lid unlock button E319 , removing and installing
- Right front window switch E41 , removing and installing
- Front Interior Locking Button E308 and E309 , removing and installing
- Front Door Opener Illumination L108 and L109 , removing and installing
- Front door contact switch, removing and installing
- Front Entry Light W31 and W32 , removing and installing
- Door Warning Light W30 and W36 , removing and installing
- Rear Doors - Lights and Switches
- Rear Doors - Lights and Switches
- Rear Window Switch E52 and E54 , removing and installing
- Rear Interior Locking Button E310 and E311 , removing and installing
- Rear Door Opener Illumination L110 and L111 , removing and installing
- Rear door contact switch, removing and installing
- Rear Entry Light W33 and W34 , removing and installing
- Rear Door Warning Light W37 and W38 , removing and installing
- Luggage Compartment - Lights and Switches
- Headliner - Lights and Switches
- Headliner - Lights and Switches
- Front interior light W1 , removing and installing
- Map/Reading Light W19 and W13 , removing and installing
- Sunroof Switch E8 , removing and installing
- Rear interior and reading lights, removing and installing
- Rear Interior Lamp Button E327 and E329 , removing and installing
- Removing and installing garage door opener
- Switch panel in roof module, removing and installing
- Center Console - Lights and Switches
- Center Console - Lights and Switches
- Mirror adjustment switch E43 with mirror selector switch E48 , removing and installing
- Access/start authorization button E408 , removing and installing
- Switch panel for front seat heating/ventilation with buttons for dampening, ESP, and level control in the center console, removing and installing
- Switch panel for rear seat position and heating/ventilation memory (4-seater), removing and installing
- Switch panel for rear seat adjustment (4-seater), removing and installing
- Switch panel for rear seat lumbar adjustment (5-seater), removing and installing
- Other electrical components
- 97 - Wiring
- Vehicle Diagnostic, Testing and Information Systems
- Fuse holder, relay panel, E-boxes and control modules, removing and installing
- Fuse holder, relay panel, E-boxes and control modules, removing and installing
- Fuse holder under the instrument panel, left, removing and installing
- Auxiliary fuse box in luggage compartment, left, removing and installing
- Thermal fuse box on driver side, removing and installing
- E-box in luggage compartment, left, removing and installing
- E-box in plenum chamber, right, removing and installing
- Relay carrier in right front footwell, removing and installing
- Vehicle electrical system control module, replacing
- Vehicle electrical system control module, removing and installing
- Roof electronics control module, removing and installing
- Wiring Harnesses and Connectors, Repairing
- 27 - Battery, Starter, Generator, Cruise control
- Body Exterior
- Wiper/Washer Systems
- Electrical Equipment
- 27 - Battery, Starter, Generator, Cruise control
- Battery
- Battery, checking
- Battery, charging
- Battery, disconnecting and reconnecting
- Battery, disconnecting and reconnecting
- Battery (vehicles with two-battery concept), disconnecting and connecting
- Notes
- Battery disconnecting and reconnecting sequence
- Disconnecting battery in luggage compartment, right
- Disconnecting second battery in luggage compartment, left
- Batteries, reconnecting sequence
- Connecting second battery in luggage compartment, left
- Connecting battery in luggage compartment, right
- Work steps required after reconnecting battery
- Battery - vehicles with electric closing assist, disconnecting and connecting
- Battery, removing and installing
- Battery cut-out relay J7 , removing and installing
- Battery cut-off
- Battery monitoring control module J367 , removing and installing
- Tightening Torques: Battery
- Starter
- Tightening Torques: Starter
- Generator, removing and installing
- Generator, removing and installing
- Generator features
- Ribbed belt, checking
- Generator (8-cyl. Gasoline engine), assembly overview
- Generator (8-cyl. gasoline engine), removing and installing
- Generator, 12-cyl. Gasoline engine
- Generator (12-cyl. gasoline engine), removing and installing
- Generator ribbed belt pulley, removing and installing
- Tightening Torques: Generator
- Adaptive Cruise Control (ACC)
- Cruise control system (CCS), removing and installing
- 90 - Instruments
- Instrument cluster
- Service interval indicator
- 92 - Windshield wiper and washer system
- Front windshield wiper system
- Front windshield wiper system
- General information
- Front windshield wiper system, removing and installing
- Notes
- Front windshield wiper system, removing
- Wiper arms, removing
- Plenum chamber cover, removing
- Cowl, removing
- Drivers side wiper frame, installing
- Left wiper frame, removing
- Removing wiper motor from left wiper frame
- Installing wiper motor into left wiper frame
- Right wiper frame, removing
- Removing wiper motor from wiper frame
- Installing wiper motor into right wiper frame
- Rest position of windshield wiper blades, adjusting
- Aero wipers, removing and installing
- Rain sensor G213 , removing and installing
- Windshield washer system
- Windshield washer system
- Front windshield washer system - assembly overview
- Washer fluid reservoir, removing and installing
- Windshield Washer Pump V5 , removing and installing
- Windshield Washer Fluid Level Sensor G33 , removing and installing
- Washer nozzles for front windshield washer system, removing and installing
- Spray jets for front windshield washer system, checking
- Headlamp cleaning system
- Washer Hose Couplings
- Washer hoses, repairing
- Tightening Torques: Windshield wiper and washer system
- 94 - Lights, Switches - Exterior
- Headlight with one gas-discharge bulb
- Headlight with one gas-discharge bulb
- Main headlamp with one gas-discharge bulb, assembly overview
- Main headlamp, removing and installing
- Correcting installation position of headlamp
- Bulbs for main headlamps with one gas discharge bulb, replacing
- Automatic headlamp range control adjusting motor, removing and installing
- Removing and installing Headlamp Range Control Module
- Level control system sensor, removing and installing
- Headlight range control module, coding
- Main headlamp, adjusting
- Main headlamp with two gas-discharge bulbs
- Main headlamp with two gas-discharge bulbs
- Main headlamp with two gas-discharge bulbs, assembly overview
- Main headlamp, removing and installing
- Correcting installation position of headlamp
- Bulbs for main headlamps with two gas discharge bulbs, replacing
- Automatic headlamp range control adjusting motor, removing and installing
- Removing and installing Headlamp Range Control Module
- HID lamp high beam control module, removing and installing
- Level control system sensor, removing and installing
- Headlight range control module, coding
- Main headlamp, adjusting
- Fog lamps
- Mirror turn signals and entry lights in exterior mirror
- Taillamps
- Taillamps
- Taillamp assembly in side panel - assembly overview
- Taillight in rear lid, assembly overview
- Taillamp assembly in side panel, removing and installing
- Tail light assembly in luggage compartment lid, removing and installing
- Back-up light, removing and installing
- Gap dimensions of taillamp assemblies
- Rear light function, checking
- License Plate Lights
- High-Mount Brake Light
- Steering column switch
- Access/start authorization
- Access/start authorization
- Emergency release
- Access/Start Authorization Switch E415
- Access/Start Authorization Button E408
- Access/Start Control Module J518
- Access/start authorization antennas, assembly overview
- Access/start authorization antennas, removing and installing
- Notes
- Drivers Access/Start Authorization Antenna R134 , removing and installing
- Front Passengers Access/Start Authorization Antenna R135 , removing and installing
- Access/Start Authorization Antenna (in rear bumper) R136
- Luggage Compartment Access/Start Authorization Antenna R137 , removing and installing
- Interior Access/Start Authorization Antenna 1 R138 , removing and installing
- Interior Access/Start Authorization Antenna 2 R139 , removing and installing
- Interior Access/Start Authorization Antenna 3 R154 , removing and installing
- Antenna for Access/Start Authorization, checking
- Notes
- Checking Drivers Access/Start Authorization Antenna R134
- Checking Front Passengers Access/Start Authorization Antenna R135
- Checking Access/Start Authorization Antenna (in rear bumper) R136
- Checking Luggage Compartment Access/Start Authorization Antenna R137
- Checking Interior Access/Start Authorization Antenna 1 R138
- Checking Interior Access/Start Authorization Antenna 2 R139
- Checking Interior Access/Start Authorization Antenna 3 R154
- Antenna for Access/Start Authorization, tightening torques
- Parking aid
- Parking aid
- General information
- Parking assistance system - assembly overview
- Parking Aid Control Module J446 , removing and installing
- Front parking aid sensor, removing and installing
- Rear parking aid sensor, removing and installing
- Front parking aid display, removing and installing
- Rear parking aid display, removing
- Front side marker lamp, removing and installing
- Front windshield wiper system
- 96 - Lights, Switches - Interior, Anti-theft
- Interior lights and switches
- Lights and switches in the instrument panel
- Lights and switches in the instrument panel
- Light Switch E1 , removing and installing
- Instrument panel light dimmer switch E20 and trip odometer reset switch E123 , removing and installing
- Rear window shade switch E149 and parking aid button E266 , removing and installing
- Glove Compartment Light W6 , removing and installing
- Glove Compartment Lamp Switch E26 , removing and installing
- Steering Column Adjustment Switch E167 , removing and installing
- Footwell lights , removing and installing
- Front Doors - Lights and Switches
- Front Doors - Lights and Switches
- Central switch for window regulator, in drivers door E189 , switch for rear lid remote control lock E233 , and fuel tank lid unlock button E319 , removing and installing
- Right front window switch E41 , removing and installing
- Front Interior Locking Button E308 and E309 , removing and installing
- Front Door Opener Illumination L108 and L109 , removing and installing
- Front door contact switch, removing and installing
- Front Entry Light W31 and W32 , removing and installing
- Door Warning Light W30 and W36 , removing and installing
- Rear Doors - Lights and Switches
- Rear Doors - Lights and Switches
- Rear Window Switch E52 and E54 , removing and installing
- Rear Interior Locking Button E310 and E311 , removing and installing
- Rear Door Opener Illumination L110 and L111 , removing and installing
- Rear door contact switch, removing and installing
- Rear Entry Light W33 and W34 , removing and installing
- Rear Door Warning Light W37 and W38 , removing and installing
- Luggage Compartment - Lights and Switches
- Headliner - Lights and Switches
- Headliner - Lights and Switches
- Front interior light W1 , removing and installing
- Map/Reading Light W19 and W13 , removing and installing
- Sunroof Switch E8 , removing and installing
- Rear interior and reading lights, removing and installing
- Rear Interior Lamp Button E327 and E329 , removing and installing
- Removing and installing garage door opener
- Switch panel in roof module, removing and installing
- Center Console - Lights and Switches
- Center Console - Lights and Switches
- Mirror adjustment switch E43 with mirror selector switch E48 , removing and installing
- Access/start authorization button E408 , removing and installing
- Switch panel for front seat heating/ventilation with buttons for dampening, ESP, and level control in the center console, removing and installing
- Switch panel for rear seat position and heating/ventilation memory (4-seater), removing and installing
- Switch panel for rear seat adjustment (4-seater), removing and installing
- Switch panel for rear seat lumbar adjustment (5-seater), removing and installing
- Other electrical components
- 97 - Wiring
- Vehicle Diagnostic, Testing and Information Systems
- Fuse holder, relay panel, E-boxes and control modules, removing and installing
- Fuse holder, relay panel, E-boxes and control modules, removing and installing
- Fuse holder under the instrument panel, left, removing and installing
- Auxiliary fuse box in luggage compartment, left, removing and installing
- Thermal fuse box on driver side, removing and installing
- E-box in luggage compartment, left, removing and installing
- E-box in plenum chamber, right, removing and installing
- Relay carrier in right front footwell, removing and installing
- Vehicle electrical system control module, replacing
- Vehicle electrical system control module, removing and installing
- Roof electronics control module, removing and installing
- Wiring Harnesses and Connectors, Repairing
- 27 - Battery, Starter, Generator, Cruise control
- Electrical Equipment - General Information
- 27 - Battery, Starter, Generator, Cruise Control
- 90 - Instruments
- 92 - Windshield Wiper and Washer system
- 94 - Lights, Switches - Exterior
- 96 - Lights, Switches - Interior, Anti-theft
- 97 - Wiring
- Vehicle Diagnostic, Testing and Information Systems
- Wiring Harnesses and Connectors, Repairing
- Connector Repair Set VAS 6410
- Electrical Equipment
- Wiring System (Data Link Connectors, Pwr Dist., Grnd Dist.)
- Electrical Equipment
- 27 - Battery, Starter, Generator, Cruise control
- Battery
- Battery, checking
- Battery, charging
- Battery, disconnecting and reconnecting
- Battery, disconnecting and reconnecting
- Battery (vehicles with two-battery concept), disconnecting and connecting
- Notes
- Battery disconnecting and reconnecting sequence
- Disconnecting battery in luggage compartment, right
- Disconnecting second battery in luggage compartment, left
- Batteries, reconnecting sequence
- Connecting second battery in luggage compartment, left
- Connecting battery in luggage compartment, right
- Work steps required after reconnecting battery
- Battery - vehicles with electric closing assist, disconnecting and connecting
- Battery, removing and installing
- Battery cut-out relay J7 , removing and installing
- Battery cut-off
- Battery monitoring control module J367 , removing and installing
- Tightening Torques: Battery
- Starter
- Tightening Torques: Starter
- Generator, removing and installing
- Generator, removing and installing
- Generator features
- Ribbed belt, checking
- Generator (8-cyl. Gasoline engine), assembly overview
- Generator (8-cyl. gasoline engine), removing and installing
- Generator, 12-cyl. Gasoline engine
- Generator (12-cyl. gasoline engine), removing and installing
- Generator ribbed belt pulley, removing and installing
- Tightening Torques: Generator
- Adaptive Cruise Control (ACC)
- Cruise control system (CCS), removing and installing
- 90 - Instruments
- Instrument cluster
- Service interval indicator
- 92 - Windshield wiper and washer system
- Front windshield wiper system
- Front windshield wiper system
- General information
- Front windshield wiper system, removing and installing
- Notes
- Front windshield wiper system, removing
- Wiper arms, removing
- Plenum chamber cover, removing
- Cowl, removing
- Drivers side wiper frame, installing
- Left wiper frame, removing
- Removing wiper motor from left wiper frame
- Installing wiper motor into left wiper frame
- Right wiper frame, removing
- Removing wiper motor from wiper frame
- Installing wiper motor into right wiper frame
- Rest position of windshield wiper blades, adjusting
- Aero wipers, removing and installing
- Rain sensor G213 , removing and installing
- Windshield washer system
- Windshield washer system
- Front windshield washer system - assembly overview
- Washer fluid reservoir, removing and installing
- Windshield Washer Pump V5 , removing and installing
- Windshield Washer Fluid Level Sensor G33 , removing and installing
- Washer nozzles for front windshield washer system, removing and installing
- Spray jets for front windshield washer system, checking
- Headlamp cleaning system
- Washer Hose Couplings
- Washer hoses, repairing
- Tightening Torques: Windshield wiper and washer system
- 94 - Lights, Switches - Exterior
- Headlight with one gas-discharge bulb
- Headlight with one gas-discharge bulb
- Main headlamp with one gas-discharge bulb, assembly overview
- Main headlamp, removing and installing
- Correcting installation position of headlamp
- Bulbs for main headlamps with one gas discharge bulb, replacing
- Automatic headlamp range control adjusting motor, removing and installing
- Removing and installing Headlamp Range Control Module
- Level control system sensor, removing and installing
- Headlight range control module, coding
- Main headlamp, adjusting
- Main headlamp with two gas-discharge bulbs
- Main headlamp with two gas-discharge bulbs
- Main headlamp with two gas-discharge bulbs, assembly overview
- Main headlamp, removing and installing
- Correcting installation position of headlamp
- Bulbs for main headlamps with two gas discharge bulbs, replacing
- Automatic headlamp range control adjusting motor, removing and installing
- Removing and installing Headlamp Range Control Module
- HID lamp high beam control module, removing and installing
- Level control system sensor, removing and installing
- Headlight range control module, coding
- Main headlamp, adjusting
- Fog lamps
- Mirror turn signals and entry lights in exterior mirror
- Taillamps
- Taillamps
- Taillamp assembly in side panel - assembly overview
- Taillight in rear lid, assembly overview
- Taillamp assembly in side panel, removing and installing
- Tail light assembly in luggage compartment lid, removing and installing
- Back-up light, removing and installing
- Gap dimensions of taillamp assemblies
- Rear light function, checking
- License Plate Lights
- High-Mount Brake Light
- Steering column switch
- Access/start authorization
- Access/start authorization
- Emergency release
- Access/Start Authorization Switch E415
- Access/Start Authorization Button E408
- Access/Start Control Module J518
- Access/start authorization antennas, assembly overview
- Access/start authorization antennas, removing and installing
- Notes
- Drivers Access/Start Authorization Antenna R134 , removing and installing
- Front Passengers Access/Start Authorization Antenna R135 , removing and installing
- Access/Start Authorization Antenna (in rear bumper) R136
- Luggage Compartment Access/Start Authorization Antenna R137 , removing and installing
- Interior Access/Start Authorization Antenna 1 R138 , removing and installing
- Interior Access/Start Authorization Antenna 2 R139 , removing and installing
- Interior Access/Start Authorization Antenna 3 R154 , removing and installing
- Antenna for Access/Start Authorization, checking
- Notes
- Checking Drivers Access/Start Authorization Antenna R134
- Checking Front Passengers Access/Start Authorization Antenna R135
- Checking Access/Start Authorization Antenna (in rear bumper) R136
- Checking Luggage Compartment Access/Start Authorization Antenna R137
- Checking Interior Access/Start Authorization Antenna 1 R138
- Checking Interior Access/Start Authorization Antenna 2 R139
- Checking Interior Access/Start Authorization Antenna 3 R154
- Antenna for Access/Start Authorization, tightening torques
- Parking aid
- Parking aid
- General information
- Parking assistance system - assembly overview
- Parking Aid Control Module J446 , removing and installing
- Front parking aid sensor, removing and installing
- Rear parking aid sensor, removing and installing
- Front parking aid display, removing and installing
- Rear parking aid display, removing
- Front side marker lamp, removing and installing
- Front windshield wiper system
- 96 - Lights, Switches - Interior, Anti-theft
- Interior lights and switches
- Lights and switches in the instrument panel
- Lights and switches in the instrument panel
- Light Switch E1 , removing and installing
- Instrument panel light dimmer switch E20 and trip odometer reset switch E123 , removing and installing
- Rear window shade switch E149 and parking aid button E266 , removing and installing
- Glove Compartment Light W6 , removing and installing
- Glove Compartment Lamp Switch E26 , removing and installing
- Steering Column Adjustment Switch E167 , removing and installing
- Footwell lights , removing and installing
- Front Doors - Lights and Switches
- Front Doors - Lights and Switches
- Central switch for window regulator, in drivers door E189 , switch for rear lid remote control lock E233 , and fuel tank lid unlock button E319 , removing and installing
- Right front window switch E41 , removing and installing
- Front Interior Locking Button E308 and E309 , removing and installing
- Front Door Opener Illumination L108 and L109 , removing and installing
- Front door contact switch, removing and installing
- Front Entry Light W31 and W32 , removing and installing
- Door Warning Light W30 and W36 , removing and installing
- Rear Doors - Lights and Switches
- Rear Doors - Lights and Switches
- Rear Window Switch E52 and E54 , removing and installing
- Rear Interior Locking Button E310 and E311 , removing and installing
- Rear Door Opener Illumination L110 and L111 , removing and installing
- Rear door contact switch, removing and installing
- Rear Entry Light W33 and W34 , removing and installing
- Rear Door Warning Light W37 and W38 , removing and installing
- Luggage Compartment - Lights and Switches
- Headliner - Lights and Switches
- Headliner - Lights and Switches
- Front interior light W1 , removing and installing
- Map/Reading Light W19 and W13 , removing and installing
- Sunroof Switch E8 , removing and installing
- Rear interior and reading lights, removing and installing
- Rear Interior Lamp Button E327 and E329 , removing and installing
- Removing and installing garage door opener
- Switch panel in roof module, removing and installing
- Center Console - Lights and Switches
- Center Console - Lights and Switches
- Mirror adjustment switch E43 with mirror selector switch E48 , removing and installing
- Access/start authorization button E408 , removing and installing
- Switch panel for front seat heating/ventilation with buttons for dampening, ESP, and level control in the center console, removing and installing
- Switch panel for rear seat position and heating/ventilation memory (4-seater), removing and installing
- Switch panel for rear seat adjustment (4-seater), removing and installing
- Switch panel for rear seat lumbar adjustment (5-seater), removing and installing
- Other electrical components
- 97 - Wiring
- Vehicle Diagnostic, Testing and Information Systems
- Fuse holder, relay panel, E-boxes and control modules, removing and installing
- Fuse holder, relay panel, E-boxes and control modules, removing and installing
- Fuse holder under the instrument panel, left, removing and installing
- Auxiliary fuse box in luggage compartment, left, removing and installing
- Thermal fuse box on driver side, removing and installing
- E-box in luggage compartment, left, removing and installing
- E-box in plenum chamber, right, removing and installing
- Relay carrier in right front footwell, removing and installing
- Vehicle electrical system control module, replacing
- Vehicle electrical system control module, removing and installing
- Roof electronics control module, removing and installing
- Wiring Harnesses and Connectors, Repairing
- 27 - Battery, Starter, Generator, Cruise control
- Electrical Equipment - General Information
- 27 - Battery, Starter, Generator, Cruise Control
- 90 - Instruments
- 92 - Windshield Wiper and Washer system
- 94 - Lights, Switches - Exterior
- 96 - Lights, Switches - Interior, Anti-theft
- 97 - Wiring
- Vehicle Diagnostic, Testing and Information Systems
- Wiring Harnesses and Connectors, Repairing
- Connector Repair Set VAS 6410
- Electrical Equipment
- Anti-Theft Systems
- Body & Frame
- Door Locks
- Body Exterior
- 50 Body - Front
- Lock carrier
- Tools
- Electrical/electronic components and locations
- Lock carrier service position, assembly overview
- Service position
- Lock carrier with attachments, assembly overview
- Lock carrier with attachments, removing and installing
- Lock carrier attachments, assembly overview
- Installation note for longmember
- Installation notes for Right Distance Regulation Sensor G259
- Right Distance Regulation Sensor G259, removing and installing
- Fenders
- Noise insulation
- Lock carrier
- 55 Hood, Lids
- Contact corrosion!
- Hood
- Locking and unlocking components of hood
- Rear lid
- Tools
- Aluminum hinge and hydraulic unit, assembly overview
- Hydraulic unit, removing and installing
- Steel hinge, assembly overview
- Gas-filled strut, removing
- Releasing gas from strut
- Rear lid, adjusting
- Basic setting of rear lid
- End plate, adjusting with lock cover removed
- End plate, adjusting with lock cover installed
- Damper, adjusting
- Lock parts with servo lid opening
- Lock parts with basic lid opening
- Fuel flap unit
- 57 Front doors, Central locking system
- Contact corrosion!
- Front door
- Tools
- Front door, assembly overview
- Door, removing and installing
- Door, adjusting
- Striker pin, adjusting
- Door handle and door lock, assembly overview
- Lock cylinder housing, removing and installing
- Door handle, removing and installing
- Door handle with cable routing (Keyless entry)
- Door lock, removing and installing
- Door Closing Assist Motor V278, assembly overview
- Door seals
- Inner door seal, removing and installing
- Outer door seal, removing and installing
- Door insulation, component location
- Door insulation, installing and removing
- Adaptation of ignition keys with radio-frequency remote control
- Batteries for the main key (foldable) with radio-frequency remote control, removing and installing
- Batteries for main key (foldable) with radio-frequency remote control (01.04 ), assembly overview
- Batteries for main key (foldable) with radio-frequency remote control (01.04 ), removing and installing
- 58 Rear doors, Window regulators
- Contact corrosion!
- Rear door
- Tools
- Rear door, assembly overview
- Door, removing and installing
- Door, adjusting
- Striker pin, adjusting
- Door handle and door lock, assembly overview
- Door handle, removing and installing
- Door handle with cable routing (Keyless entry)
- Door lock, removing and installing
- Door Closing Assist Motor V278, assembly overview
- Door seals
- Inner door seal, removing and installing
- Outer door seal, removing and installing
- Door insulation, component location
- Door insulation, installing
- 60 Sunroof
- Sliding/tilting sunroof with glass panel
- Tools
- Function
- Assembly overview
- Glass panel for sliding/tilting sunroof, removing
- Glass panel for sliding/tilting sunroof, installing
- Glass panel for sliding/tilting sunroof, adjusting (height adjustment)
- Parallel movement of glass panel, checking
- Parallel movement of glass panel, adjusting
- Panel seal, replacing
- Wind deflector, removing and installing
- Wind deflector, adjusting
- Sunroof shade, removing and installing
- Parallel movement of sunroof shade, adjusting
- Sunroof drive motor, removing and installing
- Drive motor for sliding/tilting sunroof, adjusting (zero position)
- Drive motor for sunroof shade, removing and installing
- Drive motor for wind deflector, removing and installing
- Automatic rotary switch for sunroof, removing and installing
- Sunroof shade switches, removing
- Assembly unit, removing and installing
- Operation without electricity
- Water drain hoses, cleaning
- Sunroof, adapting components
- Sunroof, coding
- Sliding/tilting sunroof with solar panel
- Tools
- Function
- Assembly overview
- Solar panel for sliding/tilting sunroof, removing
- Solar panel for sliding/tilting sunroof, installing
- Solar panel for sliding/tilting sunroof, adjusting (height adjustment)
- Parallel movement of solar panel, checking
- Parallel movement of solar panel, adjusting
- Panel seal, replacing
- Wind deflector, removing and installing
- Wind deflector, adjusting
- Trim for solar panel, removing and installing
- Sunroof drive motor, removing and installing
- Drive motor for sliding/tilting sunroof, adjusting (zero position)
- Drive motor for wind deflector, removing and installing
- Automatic rotary switch for sunroof, removing and installing
- DC converter, removing and installing
- Solar contact, removing
- Assembly unit, removing and installing
- Operation without electricity
- Water drain hoses, cleaning
- Sunroof, adapting components
- Sunroof, coding
- Sliding/tilting sunroof with glass panel
- 63 Bumpers
- Front bumper
- Bumper cover, repairing
- Tools
- Bumper cover, assembly overview
- Bumper cover, removing and installing
- Front bumper attachments
- Front bumper, substructure
- Installation notes for Right Distance Regulation Sensor G259
- Automatic distance regulation (ADR) sensor, removing and installing
- Cover piece, removing and installing
- Rear bumper
- Front bumper
- 64 Glass, Windows
- Flush bonded windows
- Tools
- Materials
- Windshield, repairing
- Windshield, assembly overview
- Plenum chamber cover, removing and installing
- Windshield, removing
- Windshield, installing
- New windshield with viewing window for VIN for vehicles without VIN, preparing
- Rear window, assembly overview
- Undamaged rear window, removing
- Rear window, installing
- Preparing old undamaged window for glazing
- Preparing new window for glazing
- Preparing window flange for glazing
- Installation notes
- Minimum curing time
- Repairing paint damage
- Cleaning when soiled by adhesive sealing material
- Front door window
- Rear door window
- Flush bonded windows
- 66 Exterior equipment
- Wheel housing liner, removing and installing
- Rearview mirror
- Radiator grille
- Roof moldings
- Protective moldings
- Sill panel trim
- 50 Body - Front
- Electrical Equipment
- 27 - Battery, Starter, Generator, Cruise control
- Battery
- Battery, checking
- Battery, charging
- Battery, disconnecting and reconnecting
- Battery, disconnecting and reconnecting
- Battery (vehicles with two-battery concept), disconnecting and connecting
- Notes
- Battery disconnecting and reconnecting sequence
- Disconnecting battery in luggage compartment, right
- Disconnecting second battery in luggage compartment, left
- Batteries, reconnecting sequence
- Connecting second battery in luggage compartment, left
- Connecting battery in luggage compartment, right
- Work steps required after reconnecting battery
- Battery - vehicles with electric closing assist, disconnecting and connecting
- Battery, removing and installing
- Battery cut-out relay J7 , removing and installing
- Battery cut-off
- Battery monitoring control module J367 , removing and installing
- Tightening Torques: Battery
- Starter
- Tightening Torques: Starter
- Generator, removing and installing
- Generator, removing and installing
- Generator features
- Ribbed belt, checking
- Generator (8-cyl. Gasoline engine), assembly overview
- Generator (8-cyl. gasoline engine), removing and installing
- Generator, 12-cyl. Gasoline engine
- Generator (12-cyl. gasoline engine), removing and installing
- Generator ribbed belt pulley, removing and installing
- Tightening Torques: Generator
- Adaptive Cruise Control (ACC)
- Cruise control system (CCS), removing and installing
- 90 - Instruments
- Instrument cluster
- Service interval indicator
- 92 - Windshield wiper and washer system
- Front windshield wiper system
- Front windshield wiper system
- General information
- Front windshield wiper system, removing and installing
- Notes
- Front windshield wiper system, removing
- Wiper arms, removing
- Plenum chamber cover, removing
- Cowl, removing
- Drivers side wiper frame, installing
- Left wiper frame, removing
- Removing wiper motor from left wiper frame
- Installing wiper motor into left wiper frame
- Right wiper frame, removing
- Removing wiper motor from wiper frame
- Installing wiper motor into right wiper frame
- Rest position of windshield wiper blades, adjusting
- Aero wipers, removing and installing
- Rain sensor G213 , removing and installing
- Windshield washer system
- Windshield washer system
- Front windshield washer system - assembly overview
- Washer fluid reservoir, removing and installing
- Windshield Washer Pump V5 , removing and installing
- Windshield Washer Fluid Level Sensor G33 , removing and installing
- Washer nozzles for front windshield washer system, removing and installing
- Spray jets for front windshield washer system, checking
- Headlamp cleaning system
- Washer Hose Couplings
- Washer hoses, repairing
- Tightening Torques: Windshield wiper and washer system
- 94 - Lights, Switches - Exterior
- Headlight with one gas-discharge bulb
- Headlight with one gas-discharge bulb
- Main headlamp with one gas-discharge bulb, assembly overview
- Main headlamp, removing and installing
- Correcting installation position of headlamp
- Bulbs for main headlamps with one gas discharge bulb, replacing
- Automatic headlamp range control adjusting motor, removing and installing
- Removing and installing Headlamp Range Control Module
- Level control system sensor, removing and installing
- Headlight range control module, coding
- Main headlamp, adjusting
- Main headlamp with two gas-discharge bulbs
- Main headlamp with two gas-discharge bulbs
- Main headlamp with two gas-discharge bulbs, assembly overview
- Main headlamp, removing and installing
- Correcting installation position of headlamp
- Bulbs for main headlamps with two gas discharge bulbs, replacing
- Automatic headlamp range control adjusting motor, removing and installing
- Removing and installing Headlamp Range Control Module
- HID lamp high beam control module, removing and installing
- Level control system sensor, removing and installing
- Headlight range control module, coding
- Main headlamp, adjusting
- Fog lamps
- Mirror turn signals and entry lights in exterior mirror
- Taillamps
- Taillamps
- Taillamp assembly in side panel - assembly overview
- Taillight in rear lid, assembly overview
- Taillamp assembly in side panel, removing and installing
- Tail light assembly in luggage compartment lid, removing and installing
- Back-up light, removing and installing
- Gap dimensions of taillamp assemblies
- Rear light function, checking
- License Plate Lights
- High-Mount Brake Light
- Steering column switch
- Access/start authorization
- Access/start authorization
- Emergency release
- Access/Start Authorization Switch E415
- Access/Start Authorization Button E408
- Access/Start Control Module J518
- Access/start authorization antennas, assembly overview
- Access/start authorization antennas, removing and installing
- Notes
- Drivers Access/Start Authorization Antenna R134 , removing and installing
- Front Passengers Access/Start Authorization Antenna R135 , removing and installing
- Access/Start Authorization Antenna (in rear bumper) R136
- Luggage Compartment Access/Start Authorization Antenna R137 , removing and installing
- Interior Access/Start Authorization Antenna 1 R138 , removing and installing
- Interior Access/Start Authorization Antenna 2 R139 , removing and installing
- Interior Access/Start Authorization Antenna 3 R154 , removing and installing
- Antenna for Access/Start Authorization, checking
- Notes
- Checking Drivers Access/Start Authorization Antenna R134
- Checking Front Passengers Access/Start Authorization Antenna R135
- Checking Access/Start Authorization Antenna (in rear bumper) R136
- Checking Luggage Compartment Access/Start Authorization Antenna R137
- Checking Interior Access/Start Authorization Antenna 1 R138
- Checking Interior Access/Start Authorization Antenna 2 R139
- Checking Interior Access/Start Authorization Antenna 3 R154
- Antenna for Access/Start Authorization, tightening torques
- Parking aid
- Parking aid
- General information
- Parking assistance system - assembly overview
- Parking Aid Control Module J446 , removing and installing
- Front parking aid sensor, removing and installing
- Rear parking aid sensor, removing and installing
- Front parking aid display, removing and installing
- Rear parking aid display, removing
- Front side marker lamp, removing and installing
- Front windshield wiper system
- 96 - Lights, Switches - Interior, Anti-theft
- Interior lights and switches
- Lights and switches in the instrument panel
- Lights and switches in the instrument panel
- Light Switch E1 , removing and installing
- Instrument panel light dimmer switch E20 and trip odometer reset switch E123 , removing and installing
- Rear window shade switch E149 and parking aid button E266 , removing and installing
- Glove Compartment Light W6 , removing and installing
- Glove Compartment Lamp Switch E26 , removing and installing
- Steering Column Adjustment Switch E167 , removing and installing
- Footwell lights , removing and installing
- Front Doors - Lights and Switches
- Front Doors - Lights and Switches
- Central switch for window regulator, in drivers door E189 , switch for rear lid remote control lock E233 , and fuel tank lid unlock button E319 , removing and installing
- Right front window switch E41 , removing and installing
- Front Interior Locking Button E308 and E309 , removing and installing
- Front Door Opener Illumination L108 and L109 , removing and installing
- Front door contact switch, removing and installing
- Front Entry Light W31 and W32 , removing and installing
- Door Warning Light W30 and W36 , removing and installing
- Rear Doors - Lights and Switches
- Rear Doors - Lights and Switches
- Rear Window Switch E52 and E54 , removing and installing
- Rear Interior Locking Button E310 and E311 , removing and installing
- Rear Door Opener Illumination L110 and L111 , removing and installing
- Rear door contact switch, removing and installing
- Rear Entry Light W33 and W34 , removing and installing
- Rear Door Warning Light W37 and W38 , removing and installing
- Luggage Compartment - Lights and Switches
- Headliner - Lights and Switches
- Headliner - Lights and Switches
- Front interior light W1 , removing and installing
- Map/Reading Light W19 and W13 , removing and installing
- Sunroof Switch E8 , removing and installing
- Rear interior and reading lights, removing and installing
- Rear Interior Lamp Button E327 and E329 , removing and installing
- Removing and installing garage door opener
- Switch panel in roof module, removing and installing
- Center Console - Lights and Switches
- Center Console - Lights and Switches
- Mirror adjustment switch E43 with mirror selector switch E48 , removing and installing
- Access/start authorization button E408 , removing and installing
- Switch panel for front seat heating/ventilation with buttons for dampening, ESP, and level control in the center console, removing and installing
- Switch panel for rear seat position and heating/ventilation memory (4-seater), removing and installing
- Switch panel for rear seat adjustment (4-seater), removing and installing
- Switch panel for rear seat lumbar adjustment (5-seater), removing and installing
- Other electrical components
- 97 - Wiring
- Vehicle Diagnostic, Testing and Information Systems
- Fuse holder, relay panel, E-boxes and control modules, removing and installing
- Fuse holder, relay panel, E-boxes and control modules, removing and installing
- Fuse holder under the instrument panel, left, removing and installing
- Auxiliary fuse box in luggage compartment, left, removing and installing
- Thermal fuse box on driver side, removing and installing
- E-box in luggage compartment, left, removing and installing
- E-box in plenum chamber, right, removing and installing
- Relay carrier in right front footwell, removing and installing
- Vehicle electrical system control module, replacing
- Vehicle electrical system control module, removing and installing
- Roof electronics control module, removing and installing
- Wiring Harnesses and Connectors, Repairing
- 27 - Battery, Starter, Generator, Cruise control
- Body Exterior
- Exterior Body Panels
- Body Collision Repair
- 00 General, Technical data
- 50 Body - Front
- 50 60 55 50 Headlight carrier, replacement
- 50 53 55 50 Extension of upper longitudinal member, replacement
- 50 71 55 50 Wheel housing reinforcement
- 50 72 55 50 Joining plate for wheel housing, replacement
- 50 73 55 50 Wheel housing reinforcement, replacement
- 50 74 55 50 Wheel housing end plate
- 50 74 55 02 Front wheel housing, replacement
- 50 79 55 00 Front longitudinal member, replacement
- 50 79 55 03 Longitudinal member front part, replacement (sub-section)
- 51 Body - Center, Chassis, Roof
- 51 03 55 00 Roof, replacement
- 51 07 55 50 Front roof cross member, replacement
- 51 08 55 50 Center roof cross member, replacement
- 51 09 55 50 Rear roof cross member, replacement
- 51 37 55 00 A pillar, replacement
- 51 37 55 00 Side part reinforcement, replacement
- 51 41 55 00 Outer B-pillar, replacement
- 51 37 55 00 B-pillar reinforcement, replacement
- 51 45 55 00 Side member, replacement
- 51 49 55 50 Side member reinforcement
- 51 48 55 50 Side member web plate, replacement
- 53 Body - Rear
- Body Collision Repair - General Information
- 01 - Body Collision Repair - General Information
- Safety Instructions
- Safety Instructions
- Removing Components
- Battery, Welding Work
- Electronic Control Units
- Paint, Glass, Upholstery, Trim
- Fuel Tank or Fuel Lines
- Air Conditioner
- Airbag System
- Seat Belts, Checking
- Safety Regulations for Belt Tensioners
- Repairs on Vehicles with Belt Tensioners
- Cutting, Straightening and/or Bending Operations on Vehicles with Airbag
- Front Seats with Side Airbag
- Basic Instructions
- Symbols
- Body Repair Tools
- Materials for Body Repairs and General Body Repairs
- Bodywork - Bonded Joints
- Anti-corrosion Measures
- Disposal Information
- Repair Procedures
- Contact Corrosion Protection
- Sheet Metal Repairs
- Aluminum Repairs
- Procedures for Repair of Synthetic Materials
- Repairing Procedure
- Repairing Glass
- Safety Instructions
- 01 - Body Collision Repair - General Information
- Body Exterior
- 50 Body - Front
- Lock carrier
- Tools
- Electrical/electronic components and locations
- Lock carrier service position, assembly overview
- Service position
- Lock carrier with attachments, assembly overview
- Lock carrier with attachments, removing and installing
- Lock carrier attachments, assembly overview
- Installation note for longmember
- Installation notes for Right Distance Regulation Sensor G259
- Right Distance Regulation Sensor G259, removing and installing
- Fenders
- Noise insulation
- Lock carrier
- 55 Hood, Lids
- Contact corrosion!
- Hood
- Locking and unlocking components of hood
- Rear lid
- Tools
- Aluminum hinge and hydraulic unit, assembly overview
- Hydraulic unit, removing and installing
- Steel hinge, assembly overview
- Gas-filled strut, removing
- Releasing gas from strut
- Rear lid, adjusting
- Basic setting of rear lid
- End plate, adjusting with lock cover removed
- End plate, adjusting with lock cover installed
- Damper, adjusting
- Lock parts with servo lid opening
- Lock parts with basic lid opening
- Fuel flap unit
- 57 Front doors, Central locking system
- Contact corrosion!
- Front door
- Tools
- Front door, assembly overview
- Door, removing and installing
- Door, adjusting
- Striker pin, adjusting
- Door handle and door lock, assembly overview
- Lock cylinder housing, removing and installing
- Door handle, removing and installing
- Door handle with cable routing (Keyless entry)
- Door lock, removing and installing
- Door Closing Assist Motor V278, assembly overview
- Door seals
- Inner door seal, removing and installing
- Outer door seal, removing and installing
- Door insulation, component location
- Door insulation, installing and removing
- Adaptation of ignition keys with radio-frequency remote control
- Batteries for the main key (foldable) with radio-frequency remote control, removing and installing
- Batteries for main key (foldable) with radio-frequency remote control (01.04 ), assembly overview
- Batteries for main key (foldable) with radio-frequency remote control (01.04 ), removing and installing
- 58 Rear doors, Window regulators
- Contact corrosion!
- Rear door
- Tools
- Rear door, assembly overview
- Door, removing and installing
- Door, adjusting
- Striker pin, adjusting
- Door handle and door lock, assembly overview
- Door handle, removing and installing
- Door handle with cable routing (Keyless entry)
- Door lock, removing and installing
- Door Closing Assist Motor V278, assembly overview
- Door seals
- Inner door seal, removing and installing
- Outer door seal, removing and installing
- Door insulation, component location
- Door insulation, installing
- 60 Sunroof
- Sliding/tilting sunroof with glass panel
- Tools
- Function
- Assembly overview
- Glass panel for sliding/tilting sunroof, removing
- Glass panel for sliding/tilting sunroof, installing
- Glass panel for sliding/tilting sunroof, adjusting (height adjustment)
- Parallel movement of glass panel, checking
- Parallel movement of glass panel, adjusting
- Panel seal, replacing
- Wind deflector, removing and installing
- Wind deflector, adjusting
- Sunroof shade, removing and installing
- Parallel movement of sunroof shade, adjusting
- Sunroof drive motor, removing and installing
- Drive motor for sliding/tilting sunroof, adjusting (zero position)
- Drive motor for sunroof shade, removing and installing
- Drive motor for wind deflector, removing and installing
- Automatic rotary switch for sunroof, removing and installing
- Sunroof shade switches, removing
- Assembly unit, removing and installing
- Operation without electricity
- Water drain hoses, cleaning
- Sunroof, adapting components
- Sunroof, coding
- Sliding/tilting sunroof with solar panel
- Tools
- Function
- Assembly overview
- Solar panel for sliding/tilting sunroof, removing
- Solar panel for sliding/tilting sunroof, installing
- Solar panel for sliding/tilting sunroof, adjusting (height adjustment)
- Parallel movement of solar panel, checking
- Parallel movement of solar panel, adjusting
- Panel seal, replacing
- Wind deflector, removing and installing
- Wind deflector, adjusting
- Trim for solar panel, removing and installing
- Sunroof drive motor, removing and installing
- Drive motor for sliding/tilting sunroof, adjusting (zero position)
- Drive motor for wind deflector, removing and installing
- Automatic rotary switch for sunroof, removing and installing
- DC converter, removing and installing
- Solar contact, removing
- Assembly unit, removing and installing
- Operation without electricity
- Water drain hoses, cleaning
- Sunroof, adapting components
- Sunroof, coding
- Sliding/tilting sunroof with glass panel
- 63 Bumpers
- Front bumper
- Bumper cover, repairing
- Tools
- Bumper cover, assembly overview
- Bumper cover, removing and installing
- Front bumper attachments
- Front bumper, substructure
- Installation notes for Right Distance Regulation Sensor G259
- Automatic distance regulation (ADR) sensor, removing and installing
- Cover piece, removing and installing
- Rear bumper
- Front bumper
- 64 Glass, Windows
- Flush bonded windows
- Tools
- Materials
- Windshield, repairing
- Windshield, assembly overview
- Plenum chamber cover, removing and installing
- Windshield, removing
- Windshield, installing
- New windshield with viewing window for VIN for vehicles without VIN, preparing
- Rear window, assembly overview
- Undamaged rear window, removing
- Rear window, installing
- Preparing old undamaged window for glazing
- Preparing new window for glazing
- Preparing window flange for glazing
- Installation notes
- Minimum curing time
- Repairing paint damage
- Cleaning when soiled by adhesive sealing material
- Front door window
- Rear door window
- Flush bonded windows
- 66 Exterior equipment
- Wheel housing liner, removing and installing
- Rearview mirror
- Radiator grille
- Roof moldings
- Protective moldings
- Sill panel trim
- 50 Body - Front
- Body Collision Repair
- Exterior/Interior Trim
- Body Exterior
- 50 Body - Front
- Lock carrier
- Tools
- Electrical/electronic components and locations
- Lock carrier service position, assembly overview
- Service position
- Lock carrier with attachments, assembly overview
- Lock carrier with attachments, removing and installing
- Lock carrier attachments, assembly overview
- Installation note for longmember
- Installation notes for Right Distance Regulation Sensor G259
- Right Distance Regulation Sensor G259, removing and installing
- Fenders
- Noise insulation
- Lock carrier
- 55 Hood, Lids
- Contact corrosion!
- Hood
- Locking and unlocking components of hood
- Rear lid
- Tools
- Aluminum hinge and hydraulic unit, assembly overview
- Hydraulic unit, removing and installing
- Steel hinge, assembly overview
- Gas-filled strut, removing
- Releasing gas from strut
- Rear lid, adjusting
- Basic setting of rear lid
- End plate, adjusting with lock cover removed
- End plate, adjusting with lock cover installed
- Damper, adjusting
- Lock parts with servo lid opening
- Lock parts with basic lid opening
- Fuel flap unit
- 57 Front doors, Central locking system
- Contact corrosion!
- Front door
- Tools
- Front door, assembly overview
- Door, removing and installing
- Door, adjusting
- Striker pin, adjusting
- Door handle and door lock, assembly overview
- Lock cylinder housing, removing and installing
- Door handle, removing and installing
- Door handle with cable routing (Keyless entry)
- Door lock, removing and installing
- Door Closing Assist Motor V278, assembly overview
- Door seals
- Inner door seal, removing and installing
- Outer door seal, removing and installing
- Door insulation, component location
- Door insulation, installing and removing
- Adaptation of ignition keys with radio-frequency remote control
- Batteries for the main key (foldable) with radio-frequency remote control, removing and installing
- Batteries for main key (foldable) with radio-frequency remote control (01.04 ), assembly overview
- Batteries for main key (foldable) with radio-frequency remote control (01.04 ), removing and installing
- 58 Rear doors, Window regulators
- Contact corrosion!
- Rear door
- Tools
- Rear door, assembly overview
- Door, removing and installing
- Door, adjusting
- Striker pin, adjusting
- Door handle and door lock, assembly overview
- Door handle, removing and installing
- Door handle with cable routing (Keyless entry)
- Door lock, removing and installing
- Door Closing Assist Motor V278, assembly overview
- Door seals
- Inner door seal, removing and installing
- Outer door seal, removing and installing
- Door insulation, component location
- Door insulation, installing
- 60 Sunroof
- Sliding/tilting sunroof with glass panel
- Tools
- Function
- Assembly overview
- Glass panel for sliding/tilting sunroof, removing
- Glass panel for sliding/tilting sunroof, installing
- Glass panel for sliding/tilting sunroof, adjusting (height adjustment)
- Parallel movement of glass panel, checking
- Parallel movement of glass panel, adjusting
- Panel seal, replacing
- Wind deflector, removing and installing
- Wind deflector, adjusting
- Sunroof shade, removing and installing
- Parallel movement of sunroof shade, adjusting
- Sunroof drive motor, removing and installing
- Drive motor for sliding/tilting sunroof, adjusting (zero position)
- Drive motor for sunroof shade, removing and installing
- Drive motor for wind deflector, removing and installing
- Automatic rotary switch for sunroof, removing and installing
- Sunroof shade switches, removing
- Assembly unit, removing and installing
- Operation without electricity
- Water drain hoses, cleaning
- Sunroof, adapting components
- Sunroof, coding
- Sliding/tilting sunroof with solar panel
- Tools
- Function
- Assembly overview
- Solar panel for sliding/tilting sunroof, removing
- Solar panel for sliding/tilting sunroof, installing
- Solar panel for sliding/tilting sunroof, adjusting (height adjustment)
- Parallel movement of solar panel, checking
- Parallel movement of solar panel, adjusting
- Panel seal, replacing
- Wind deflector, removing and installing
- Wind deflector, adjusting
- Trim for solar panel, removing and installing
- Sunroof drive motor, removing and installing
- Drive motor for sliding/tilting sunroof, adjusting (zero position)
- Drive motor for wind deflector, removing and installing
- Automatic rotary switch for sunroof, removing and installing
- DC converter, removing and installing
- Solar contact, removing
- Assembly unit, removing and installing
- Operation without electricity
- Water drain hoses, cleaning
- Sunroof, adapting components
- Sunroof, coding
- Sliding/tilting sunroof with glass panel
- 63 Bumpers
- Front bumper
- Bumper cover, repairing
- Tools
- Bumper cover, assembly overview
- Bumper cover, removing and installing
- Front bumper attachments
- Front bumper, substructure
- Installation notes for Right Distance Regulation Sensor G259
- Automatic distance regulation (ADR) sensor, removing and installing
- Cover piece, removing and installing
- Rear bumper
- Front bumper
- 64 Glass, Windows
- Flush bonded windows
- Tools
- Materials
- Windshield, repairing
- Windshield, assembly overview
- Plenum chamber cover, removing and installing
- Windshield, removing
- Windshield, installing
- New windshield with viewing window for VIN for vehicles without VIN, preparing
- Rear window, assembly overview
- Undamaged rear window, removing
- Rear window, installing
- Preparing old undamaged window for glazing
- Preparing new window for glazing
- Preparing window flange for glazing
- Installation notes
- Minimum curing time
- Repairing paint damage
- Cleaning when soiled by adhesive sealing material
- Front door window
- Rear door window
- Flush bonded windows
- 66 Exterior equipment
- Wheel housing liner, removing and installing
- Rearview mirror
- Radiator grille
- Roof moldings
- Protective moldings
- Sill panel trim
- 50 Body - Front
- Body Interior
- 68 - Interior equipment
- Rearview mirror
- Storage compartments, covers and trim
- Tools
- Center console (4-seater), removing and installing
- Center console (5-seater), removing and installing
- Front ashtray unit, removing and installing
- Storage compartment (front) in center console (4-seater), removing and installing
- Storage compartment (rear) in center console (4-seater), removing and installing
- Cup holder, removing and installing
- Footwell cover (passenger side), removing and installing
- Glove compartment, removing and installing
- Footwell cover (driver side), removing and installing
- Fuse panel cover (driver side), removing and installing
- Instrument panel side covers, removing and installing
- Sun visor, removing and installing
- Grab handles
- 69 - Passenger protection - Airbags, Seat belts
- Seat belts
- Tools
- Safety precautions for belt tensioners
- Disposing of belt tensioner units
- Front seat belt with two belt retractors, removing and installing
- Front seat belt, removing and installing
- Belt height adjuster (electrical), removing and installing
- Belt height adjuster (mechanical), removing and installing
- Front seat belt latch, removing and installing
- Multi-part locking tongue, detaching
- Shoulder and lap belt, connecting
- Rear seat belts (4-seater), removing and installing
- Rear outer seat belts (5-seater), removing and installing
- Rear middle seat belt (5-seater), removing and installing
- Rear belt latch (4-seater), removing and installing
- Rear belt latches (5-seater), removing and installing
- Seat belts, inspecting
- Inspecting child seat anchors (LATCH system Lower Anchors and Tethers for CHildren), after accident
- Airbag
- Location overview: Airbag components
- Safety precautions for work on airbags
- Disposal of airbag units
- Airbag units, deploying prior to disposal
- Airbag units, replacing after an accident
- Airbag control module -J234-, removing and installing
- Driver airbag unit, removing and installing
- Driver airbag unit mounting plate, removing and installing
- Steering wheel, removing and installing
- Passengers side airbag unit, removing and installing
- Side airbags for driver and front passenger, removing and installing
- Driver and passenger side head curtain airbags, removing and installing
- Rear side airbag, removing and installing
- Passenger Occupant Detection System (PODS) (USA only), removing and installing
- Components, adapting
- Crash sensors
- Seat belts
- 70 - Interior trim
- Instrument panel, removing and installing
- Door trim
- Sun shades
- Pillar trim
- Upper A-pillar trim, removing and installing
- Passenger side lower A-pillar trim, removing and installing
- Driver side lower A-pillar trim, removing and installing
- Upper B-pillar trim, removing and installing
- Lower B-pillar trim, removing and installing
- Upper C-pillar trim, removing and installing
- Lower C-pillar trim, removing and installing
- Wheel house trim, removing and installing
- Rear shelf
- Luggage compartment trim
- Roof trim
- 72 - Seat - Frames
- Front seats
- Tools
- Front seat, removing and installing
- Seat trim, removing and installing
- Seat switch assembly, removing and installing
- Seat control module, removing and installing
- Seat longitudinal adjuster, removing and installing
- Drive motor for seat longitudinal adjuster, removing and installing
- Seat inclination adjuster, removing and installing
- Seat height adjuster, removing and installing
- Seat backrest, removing and installing
- Lumbar support, removing and installing
- Seat backrest panel, 18/16-position seat, removing and installing
- Seat backrest panel, 12-way seat, removing and installing
- Seat headrest, removing and installing
- Rear seats
- Tools
- Rear seat cushions, 10-position seat, removing and installing
- Rear seat backrest, 10-position seat, removing and installing
- Seat frame, 10-position seat, removing and installing
- Control module, 10-position seat, removing and installing
- Headrest, 10-position seat, removing and installing
- Rear seat cushion, 5-seater, removing and installing
- Rear seat backrest, 5-seater, removing and installing
- Front seats
- 74 - Seats - Upholstery, Covers
- Front seat covers and upholstery
- Rear seat covers and upholstery
- Tools
- Rear seat cushion cover and padding, 10-position seat, removing and installing
- Rear seat backrest cover and padding, 10-position seat, removing and installing
- Center armrest, 4-seater, removing and installing
- Rear seat cushion cover and padding, 5-seater, removing and installing
- Rear seat backrest cover and padding, 5-seater, removing and installing
- Center armrest, 5-seater, removing and installing
- Cupholder in center armrest, 5-seater, removing and installing
- Center headrest, 5-seater, removing and installing
- Rear seat heating elements, replacing
- 76 - Gas, water, electricity
- 68 - Interior equipment
- Body Exterior
- Frames, Subframes & Crossmembers
- Body Collision Repair
- 00 General, Technical data
- 50 Body - Front
- 50 60 55 50 Headlight carrier, replacement
- 50 53 55 50 Extension of upper longitudinal member, replacement
- 50 71 55 50 Wheel housing reinforcement
- 50 72 55 50 Joining plate for wheel housing, replacement
- 50 73 55 50 Wheel housing reinforcement, replacement
- 50 74 55 50 Wheel housing end plate
- 50 74 55 02 Front wheel housing, replacement
- 50 79 55 00 Front longitudinal member, replacement
- 50 79 55 03 Longitudinal member front part, replacement (sub-section)
- 51 Body - Center, Chassis, Roof
- 51 03 55 00 Roof, replacement
- 51 07 55 50 Front roof cross member, replacement
- 51 08 55 50 Center roof cross member, replacement
- 51 09 55 50 Rear roof cross member, replacement
- 51 37 55 00 A pillar, replacement
- 51 37 55 00 Side part reinforcement, replacement
- 51 41 55 00 Outer B-pillar, replacement
- 51 37 55 00 B-pillar reinforcement, replacement
- 51 45 55 00 Side member, replacement
- 51 49 55 50 Side member reinforcement
- 51 48 55 50 Side member web plate, replacement
- 53 Body - Rear
- Body Collision Repair - General Information
- 01 - Body Collision Repair - General Information
- Safety Instructions
- Safety Instructions
- Removing Components
- Battery, Welding Work
- Electronic Control Units
- Paint, Glass, Upholstery, Trim
- Fuel Tank or Fuel Lines
- Air Conditioner
- Airbag System
- Seat Belts, Checking
- Safety Regulations for Belt Tensioners
- Repairs on Vehicles with Belt Tensioners
- Cutting, Straightening and/or Bending Operations on Vehicles with Airbag
- Front Seats with Side Airbag
- Basic Instructions
- Symbols
- Body Repair Tools
- Materials for Body Repairs and General Body Repairs
- Bodywork - Bonded Joints
- Anti-corrosion Measures
- Disposal Information
- Repair Procedures
- Contact Corrosion Protection
- Sheet Metal Repairs
- Aluminum Repairs
- Procedures for Repair of Synthetic Materials
- Repairing Procedure
- Repairing Glass
- Safety Instructions
- 01 - Body Collision Repair - General Information
- Body Collision Repair
- Ignition Switch/Steering Lock
- Electrical Equipment
- 27 - Battery, Starter, Generator, Cruise control
- Battery
- Battery, checking
- Battery, charging
- Battery, disconnecting and reconnecting
- Battery, disconnecting and reconnecting
- Battery (vehicles with two-battery concept), disconnecting and connecting
- Notes
- Battery disconnecting and reconnecting sequence
- Disconnecting battery in luggage compartment, right
- Disconnecting second battery in luggage compartment, left
- Batteries, reconnecting sequence
- Connecting second battery in luggage compartment, left
- Connecting battery in luggage compartment, right
- Work steps required after reconnecting battery
- Battery - vehicles with electric closing assist, disconnecting and connecting
- Battery, removing and installing
- Battery cut-out relay J7 , removing and installing
- Battery cut-off
- Battery monitoring control module J367 , removing and installing
- Tightening Torques: Battery
- Starter
- Tightening Torques: Starter
- Generator, removing and installing
- Generator, removing and installing
- Generator features
- Ribbed belt, checking
- Generator (8-cyl. Gasoline engine), assembly overview
- Generator (8-cyl. gasoline engine), removing and installing
- Generator, 12-cyl. Gasoline engine
- Generator (12-cyl. gasoline engine), removing and installing
- Generator ribbed belt pulley, removing and installing
- Tightening Torques: Generator
- Adaptive Cruise Control (ACC)
- Cruise control system (CCS), removing and installing
- 90 - Instruments
- Instrument cluster
- Service interval indicator
- 92 - Windshield wiper and washer system
- Front windshield wiper system
- Front windshield wiper system
- General information
- Front windshield wiper system, removing and installing
- Notes
- Front windshield wiper system, removing
- Wiper arms, removing
- Plenum chamber cover, removing
- Cowl, removing
- Drivers side wiper frame, installing
- Left wiper frame, removing
- Removing wiper motor from left wiper frame
- Installing wiper motor into left wiper frame
- Right wiper frame, removing
- Removing wiper motor from wiper frame
- Installing wiper motor into right wiper frame
- Rest position of windshield wiper blades, adjusting
- Aero wipers, removing and installing
- Rain sensor G213 , removing and installing
- Windshield washer system
- Windshield washer system
- Front windshield washer system - assembly overview
- Washer fluid reservoir, removing and installing
- Windshield Washer Pump V5 , removing and installing
- Windshield Washer Fluid Level Sensor G33 , removing and installing
- Washer nozzles for front windshield washer system, removing and installing
- Spray jets for front windshield washer system, checking
- Headlamp cleaning system
- Washer Hose Couplings
- Washer hoses, repairing
- Tightening Torques: Windshield wiper and washer system
- 94 - Lights, Switches - Exterior
- Headlight with one gas-discharge bulb
- Headlight with one gas-discharge bulb
- Main headlamp with one gas-discharge bulb, assembly overview
- Main headlamp, removing and installing
- Correcting installation position of headlamp
- Bulbs for main headlamps with one gas discharge bulb, replacing
- Automatic headlamp range control adjusting motor, removing and installing
- Removing and installing Headlamp Range Control Module
- Level control system sensor, removing and installing
- Headlight range control module, coding
- Main headlamp, adjusting
- Main headlamp with two gas-discharge bulbs
- Main headlamp with two gas-discharge bulbs
- Main headlamp with two gas-discharge bulbs, assembly overview
- Main headlamp, removing and installing
- Correcting installation position of headlamp
- Bulbs for main headlamps with two gas discharge bulbs, replacing
- Automatic headlamp range control adjusting motor, removing and installing
- Removing and installing Headlamp Range Control Module
- HID lamp high beam control module, removing and installing
- Level control system sensor, removing and installing
- Headlight range control module, coding
- Main headlamp, adjusting
- Fog lamps
- Mirror turn signals and entry lights in exterior mirror
- Taillamps
- Taillamps
- Taillamp assembly in side panel - assembly overview
- Taillight in rear lid, assembly overview
- Taillamp assembly in side panel, removing and installing
- Tail light assembly in luggage compartment lid, removing and installing
- Back-up light, removing and installing
- Gap dimensions of taillamp assemblies
- Rear light function, checking
- License Plate Lights
- High-Mount Brake Light
- Steering column switch
- Access/start authorization
- Access/start authorization
- Emergency release
- Access/Start Authorization Switch E415
- Access/Start Authorization Button E408
- Access/Start Control Module J518
- Access/start authorization antennas, assembly overview
- Access/start authorization antennas, removing and installing
- Notes
- Drivers Access/Start Authorization Antenna R134 , removing and installing
- Front Passengers Access/Start Authorization Antenna R135 , removing and installing
- Access/Start Authorization Antenna (in rear bumper) R136
- Luggage Compartment Access/Start Authorization Antenna R137 , removing and installing
- Interior Access/Start Authorization Antenna 1 R138 , removing and installing
- Interior Access/Start Authorization Antenna 2 R139 , removing and installing
- Interior Access/Start Authorization Antenna 3 R154 , removing and installing
- Antenna for Access/Start Authorization, checking
- Notes
- Checking Drivers Access/Start Authorization Antenna R134
- Checking Front Passengers Access/Start Authorization Antenna R135
- Checking Access/Start Authorization Antenna (in rear bumper) R136
- Checking Luggage Compartment Access/Start Authorization Antenna R137
- Checking Interior Access/Start Authorization Antenna 1 R138
- Checking Interior Access/Start Authorization Antenna 2 R139
- Checking Interior Access/Start Authorization Antenna 3 R154
- Antenna for Access/Start Authorization, tightening torques
- Parking aid
- Parking aid
- General information
- Parking assistance system - assembly overview
- Parking Aid Control Module J446 , removing and installing
- Front parking aid sensor, removing and installing
- Rear parking aid sensor, removing and installing
- Front parking aid display, removing and installing
- Rear parking aid display, removing
- Front side marker lamp, removing and installing
- Front windshield wiper system
- 96 - Lights, Switches - Interior, Anti-theft
- Interior lights and switches
- Lights and switches in the instrument panel
- Lights and switches in the instrument panel
- Light Switch E1 , removing and installing
- Instrument panel light dimmer switch E20 and trip odometer reset switch E123 , removing and installing
- Rear window shade switch E149 and parking aid button E266 , removing and installing
- Glove Compartment Light W6 , removing and installing
- Glove Compartment Lamp Switch E26 , removing and installing
- Steering Column Adjustment Switch E167 , removing and installing
- Footwell lights , removing and installing
- Front Doors - Lights and Switches
- Front Doors - Lights and Switches
- Central switch for window regulator, in drivers door E189 , switch for rear lid remote control lock E233 , and fuel tank lid unlock button E319 , removing and installing
- Right front window switch E41 , removing and installing
- Front Interior Locking Button E308 and E309 , removing and installing
- Front Door Opener Illumination L108 and L109 , removing and installing
- Front door contact switch, removing and installing
- Front Entry Light W31 and W32 , removing and installing
- Door Warning Light W30 and W36 , removing and installing
- Rear Doors - Lights and Switches
- Rear Doors - Lights and Switches
- Rear Window Switch E52 and E54 , removing and installing
- Rear Interior Locking Button E310 and E311 , removing and installing
- Rear Door Opener Illumination L110 and L111 , removing and installing
- Rear door contact switch, removing and installing
- Rear Entry Light W33 and W34 , removing and installing
- Rear Door Warning Light W37 and W38 , removing and installing
- Luggage Compartment - Lights and Switches
- Headliner - Lights and Switches
- Headliner - Lights and Switches
- Front interior light W1 , removing and installing
- Map/Reading Light W19 and W13 , removing and installing
- Sunroof Switch E8 , removing and installing
- Rear interior and reading lights, removing and installing
- Rear Interior Lamp Button E327 and E329 , removing and installing
- Removing and installing garage door opener
- Switch panel in roof module, removing and installing
- Center Console - Lights and Switches
- Center Console - Lights and Switches
- Mirror adjustment switch E43 with mirror selector switch E48 , removing and installing
- Access/start authorization button E408 , removing and installing
- Switch panel for front seat heating/ventilation with buttons for dampening, ESP, and level control in the center console, removing and installing
- Switch panel for rear seat position and heating/ventilation memory (4-seater), removing and installing
- Switch panel for rear seat adjustment (4-seater), removing and installing
- Switch panel for rear seat lumbar adjustment (5-seater), removing and installing
- Other electrical components
- 97 - Wiring
- Vehicle Diagnostic, Testing and Information Systems
- Fuse holder, relay panel, E-boxes and control modules, removing and installing
- Fuse holder, relay panel, E-boxes and control modules, removing and installing
- Fuse holder under the instrument panel, left, removing and installing
- Auxiliary fuse box in luggage compartment, left, removing and installing
- Thermal fuse box on driver side, removing and installing
- E-box in luggage compartment, left, removing and installing
- E-box in plenum chamber, right, removing and installing
- Relay carrier in right front footwell, removing and installing
- Vehicle electrical system control module, replacing
- Vehicle electrical system control module, removing and installing
- Roof electronics control module, removing and installing
- Wiring Harnesses and Connectors, Repairing
- 27 - Battery, Starter, Generator, Cruise control
- Electrical Equipment
- Mirrors
- Body Interior
- 68 - Interior equipment
- Rearview mirror
- Storage compartments, covers and trim
- Tools
- Center console (4-seater), removing and installing
- Center console (5-seater), removing and installing
- Front ashtray unit, removing and installing
- Storage compartment (front) in center console (4-seater), removing and installing
- Storage compartment (rear) in center console (4-seater), removing and installing
- Cup holder, removing and installing
- Footwell cover (passenger side), removing and installing
- Glove compartment, removing and installing
- Footwell cover (driver side), removing and installing
- Fuse panel cover (driver side), removing and installing
- Instrument panel side covers, removing and installing
- Sun visor, removing and installing
- Grab handles
- 69 - Passenger protection - Airbags, Seat belts
- Seat belts
- Tools
- Safety precautions for belt tensioners
- Disposing of belt tensioner units
- Front seat belt with two belt retractors, removing and installing
- Front seat belt, removing and installing
- Belt height adjuster (electrical), removing and installing
- Belt height adjuster (mechanical), removing and installing
- Front seat belt latch, removing and installing
- Multi-part locking tongue, detaching
- Shoulder and lap belt, connecting
- Rear seat belts (4-seater), removing and installing
- Rear outer seat belts (5-seater), removing and installing
- Rear middle seat belt (5-seater), removing and installing
- Rear belt latch (4-seater), removing and installing
- Rear belt latches (5-seater), removing and installing
- Seat belts, inspecting
- Inspecting child seat anchors (LATCH system Lower Anchors and Tethers for CHildren), after accident
- Airbag
- Location overview: Airbag components
- Safety precautions for work on airbags
- Disposal of airbag units
- Airbag units, deploying prior to disposal
- Airbag units, replacing after an accident
- Airbag control module -J234-, removing and installing
- Driver airbag unit, removing and installing
- Driver airbag unit mounting plate, removing and installing
- Steering wheel, removing and installing
- Passengers side airbag unit, removing and installing
- Side airbags for driver and front passenger, removing and installing
- Driver and passenger side head curtain airbags, removing and installing
- Rear side airbag, removing and installing
- Passenger Occupant Detection System (PODS) (USA only), removing and installing
- Components, adapting
- Crash sensors
- Seat belts
- 70 - Interior trim
- Instrument panel, removing and installing
- Door trim
- Sun shades
- Pillar trim
- Upper A-pillar trim, removing and installing
- Passenger side lower A-pillar trim, removing and installing
- Driver side lower A-pillar trim, removing and installing
- Upper B-pillar trim, removing and installing
- Lower B-pillar trim, removing and installing
- Upper C-pillar trim, removing and installing
- Lower C-pillar trim, removing and installing
- Wheel house trim, removing and installing
- Rear shelf
- Luggage compartment trim
- Roof trim
- 72 - Seat - Frames
- Front seats
- Tools
- Front seat, removing and installing
- Seat trim, removing and installing
- Seat switch assembly, removing and installing
- Seat control module, removing and installing
- Seat longitudinal adjuster, removing and installing
- Drive motor for seat longitudinal adjuster, removing and installing
- Seat inclination adjuster, removing and installing
- Seat height adjuster, removing and installing
- Seat backrest, removing and installing
- Lumbar support, removing and installing
- Seat backrest panel, 18/16-position seat, removing and installing
- Seat backrest panel, 12-way seat, removing and installing
- Seat headrest, removing and installing
- Rear seats
- Tools
- Rear seat cushions, 10-position seat, removing and installing
- Rear seat backrest, 10-position seat, removing and installing
- Seat frame, 10-position seat, removing and installing
- Control module, 10-position seat, removing and installing
- Headrest, 10-position seat, removing and installing
- Rear seat cushion, 5-seater, removing and installing
- Rear seat backrest, 5-seater, removing and installing
- Front seats
- 74 - Seats - Upholstery, Covers
- Front seat covers and upholstery
- Rear seat covers and upholstery
- Tools
- Rear seat cushion cover and padding, 10-position seat, removing and installing
- Rear seat backrest cover and padding, 10-position seat, removing and installing
- Center armrest, 4-seater, removing and installing
- Rear seat cushion cover and padding, 5-seater, removing and installing
- Rear seat backrest cover and padding, 5-seater, removing and installing
- Center armrest, 5-seater, removing and installing
- Cupholder in center armrest, 5-seater, removing and installing
- Center headrest, 5-seater, removing and installing
- Rear seat heating elements, replacing
- 76 - Gas, water, electricity
- 68 - Interior equipment
- Body Interior
- Seats
- Body Interior
- 68 - Interior equipment
- Rearview mirror
- Storage compartments, covers and trim
- Tools
- Center console (4-seater), removing and installing
- Center console (5-seater), removing and installing
- Front ashtray unit, removing and installing
- Storage compartment (front) in center console (4-seater), removing and installing
- Storage compartment (rear) in center console (4-seater), removing and installing
- Cup holder, removing and installing
- Footwell cover (passenger side), removing and installing
- Glove compartment, removing and installing
- Footwell cover (driver side), removing and installing
- Fuse panel cover (driver side), removing and installing
- Instrument panel side covers, removing and installing
- Sun visor, removing and installing
- Grab handles
- 69 - Passenger protection - Airbags, Seat belts
- Seat belts
- Tools
- Safety precautions for belt tensioners
- Disposing of belt tensioner units
- Front seat belt with two belt retractors, removing and installing
- Front seat belt, removing and installing
- Belt height adjuster (electrical), removing and installing
- Belt height adjuster (mechanical), removing and installing
- Front seat belt latch, removing and installing
- Multi-part locking tongue, detaching
- Shoulder and lap belt, connecting
- Rear seat belts (4-seater), removing and installing
- Rear outer seat belts (5-seater), removing and installing
- Rear middle seat belt (5-seater), removing and installing
- Rear belt latch (4-seater), removing and installing
- Rear belt latches (5-seater), removing and installing
- Seat belts, inspecting
- Inspecting child seat anchors (LATCH system Lower Anchors and Tethers for CHildren), after accident
- Airbag
- Location overview: Airbag components
- Safety precautions for work on airbags
- Disposal of airbag units
- Airbag units, deploying prior to disposal
- Airbag units, replacing after an accident
- Airbag control module -J234-, removing and installing
- Driver airbag unit, removing and installing
- Driver airbag unit mounting plate, removing and installing
- Steering wheel, removing and installing
- Passengers side airbag unit, removing and installing
- Side airbags for driver and front passenger, removing and installing
- Driver and passenger side head curtain airbags, removing and installing
- Rear side airbag, removing and installing
- Passenger Occupant Detection System (PODS) (USA only), removing and installing
- Components, adapting
- Crash sensors
- Seat belts
- 70 - Interior trim
- Instrument panel, removing and installing
- Door trim
- Sun shades
- Pillar trim
- Upper A-pillar trim, removing and installing
- Passenger side lower A-pillar trim, removing and installing
- Driver side lower A-pillar trim, removing and installing
- Upper B-pillar trim, removing and installing
- Lower B-pillar trim, removing and installing
- Upper C-pillar trim, removing and installing
- Lower C-pillar trim, removing and installing
- Wheel house trim, removing and installing
- Rear shelf
- Luggage compartment trim
- Roof trim
- 72 - Seat - Frames
- Front seats
- Tools
- Front seat, removing and installing
- Seat trim, removing and installing
- Seat switch assembly, removing and installing
- Seat control module, removing and installing
- Seat longitudinal adjuster, removing and installing
- Drive motor for seat longitudinal adjuster, removing and installing
- Seat inclination adjuster, removing and installing
- Seat height adjuster, removing and installing
- Seat backrest, removing and installing
- Lumbar support, removing and installing
- Seat backrest panel, 18/16-position seat, removing and installing
- Seat backrest panel, 12-way seat, removing and installing
- Seat headrest, removing and installing
- Rear seats
- Tools
- Rear seat cushions, 10-position seat, removing and installing
- Rear seat backrest, 10-position seat, removing and installing
- Seat frame, 10-position seat, removing and installing
- Control module, 10-position seat, removing and installing
- Headrest, 10-position seat, removing and installing
- Rear seat cushion, 5-seater, removing and installing
- Rear seat backrest, 5-seater, removing and installing
- Front seats
- 74 - Seats - Upholstery, Covers
- Front seat covers and upholstery
- Rear seat covers and upholstery
- Tools
- Rear seat cushion cover and padding, 10-position seat, removing and installing
- Rear seat backrest cover and padding, 10-position seat, removing and installing
- Center armrest, 4-seater, removing and installing
- Rear seat cushion cover and padding, 5-seater, removing and installing
- Rear seat backrest cover and padding, 5-seater, removing and installing
- Center armrest, 5-seater, removing and installing
- Cupholder in center armrest, 5-seater, removing and installing
- Center headrest, 5-seater, removing and installing
- Rear seat heating elements, replacing
- 76 - Gas, water, electricity
- 68 - Interior equipment
- Body Interior
- Sun Roof/T-Top/Convertible Top
- Body Exterior
- 50 Body - Front
- Lock carrier
- Tools
- Electrical/electronic components and locations
- Lock carrier service position, assembly overview
- Service position
- Lock carrier with attachments, assembly overview
- Lock carrier with attachments, removing and installing
- Lock carrier attachments, assembly overview
- Installation note for longmember
- Installation notes for Right Distance Regulation Sensor G259
- Right Distance Regulation Sensor G259, removing and installing
- Fenders
- Noise insulation
- Lock carrier
- 55 Hood, Lids
- Contact corrosion!
- Hood
- Locking and unlocking components of hood
- Rear lid
- Tools
- Aluminum hinge and hydraulic unit, assembly overview
- Hydraulic unit, removing and installing
- Steel hinge, assembly overview
- Gas-filled strut, removing
- Releasing gas from strut
- Rear lid, adjusting
- Basic setting of rear lid
- End plate, adjusting with lock cover removed
- End plate, adjusting with lock cover installed
- Damper, adjusting
- Lock parts with servo lid opening
- Lock parts with basic lid opening
- Fuel flap unit
- 57 Front doors, Central locking system
- Contact corrosion!
- Front door
- Tools
- Front door, assembly overview
- Door, removing and installing
- Door, adjusting
- Striker pin, adjusting
- Door handle and door lock, assembly overview
- Lock cylinder housing, removing and installing
- Door handle, removing and installing
- Door handle with cable routing (Keyless entry)
- Door lock, removing and installing
- Door Closing Assist Motor V278, assembly overview
- Door seals
- Inner door seal, removing and installing
- Outer door seal, removing and installing
- Door insulation, component location
- Door insulation, installing and removing
- Adaptation of ignition keys with radio-frequency remote control
- Batteries for the main key (foldable) with radio-frequency remote control, removing and installing
- Batteries for main key (foldable) with radio-frequency remote control (01.04 ), assembly overview
- Batteries for main key (foldable) with radio-frequency remote control (01.04 ), removing and installing
- 58 Rear doors, Window regulators
- Contact corrosion!
- Rear door
- Tools
- Rear door, assembly overview
- Door, removing and installing
- Door, adjusting
- Striker pin, adjusting
- Door handle and door lock, assembly overview
- Door handle, removing and installing
- Door handle with cable routing (Keyless entry)
- Door lock, removing and installing
- Door Closing Assist Motor V278, assembly overview
- Door seals
- Inner door seal, removing and installing
- Outer door seal, removing and installing
- Door insulation, component location
- Door insulation, installing
- 60 Sunroof
- Sliding/tilting sunroof with glass panel
- Tools
- Function
- Assembly overview
- Glass panel for sliding/tilting sunroof, removing
- Glass panel for sliding/tilting sunroof, installing
- Glass panel for sliding/tilting sunroof, adjusting (height adjustment)
- Parallel movement of glass panel, checking
- Parallel movement of glass panel, adjusting
- Panel seal, replacing
- Wind deflector, removing and installing
- Wind deflector, adjusting
- Sunroof shade, removing and installing
- Parallel movement of sunroof shade, adjusting
- Sunroof drive motor, removing and installing
- Drive motor for sliding/tilting sunroof, adjusting (zero position)
- Drive motor for sunroof shade, removing and installing
- Drive motor for wind deflector, removing and installing
- Automatic rotary switch for sunroof, removing and installing
- Sunroof shade switches, removing
- Assembly unit, removing and installing
- Operation without electricity
- Water drain hoses, cleaning
- Sunroof, adapting components
- Sunroof, coding
- Sliding/tilting sunroof with solar panel
- Tools
- Function
- Assembly overview
- Solar panel for sliding/tilting sunroof, removing
- Solar panel for sliding/tilting sunroof, installing
- Solar panel for sliding/tilting sunroof, adjusting (height adjustment)
- Parallel movement of solar panel, checking
- Parallel movement of solar panel, adjusting
- Panel seal, replacing
- Wind deflector, removing and installing
- Wind deflector, adjusting
- Trim for solar panel, removing and installing
- Sunroof drive motor, removing and installing
- Drive motor for sliding/tilting sunroof, adjusting (zero position)
- Drive motor for wind deflector, removing and installing
- Automatic rotary switch for sunroof, removing and installing
- DC converter, removing and installing
- Solar contact, removing
- Assembly unit, removing and installing
- Operation without electricity
- Water drain hoses, cleaning
- Sunroof, adapting components
- Sunroof, coding
- Sliding/tilting sunroof with glass panel
- 63 Bumpers
- Front bumper
- Bumper cover, repairing
- Tools
- Bumper cover, assembly overview
- Bumper cover, removing and installing
- Front bumper attachments
- Front bumper, substructure
- Installation notes for Right Distance Regulation Sensor G259
- Automatic distance regulation (ADR) sensor, removing and installing
- Cover piece, removing and installing
- Rear bumper
- Front bumper
- 64 Glass, Windows
- Flush bonded windows
- Tools
- Materials
- Windshield, repairing
- Windshield, assembly overview
- Plenum chamber cover, removing and installing
- Windshield, removing
- Windshield, installing
- New windshield with viewing window for VIN for vehicles without VIN, preparing
- Rear window, assembly overview
- Undamaged rear window, removing
- Rear window, installing
- Preparing old undamaged window for glazing
- Preparing new window for glazing
- Preparing window flange for glazing
- Installation notes
- Minimum curing time
- Repairing paint damage
- Cleaning when soiled by adhesive sealing material
- Front door window
- Rear door window
- Flush bonded windows
- 66 Exterior equipment
- Wheel housing liner, removing and installing
- Rearview mirror
- Radiator grille
- Roof moldings
- Protective moldings
- Sill panel trim
- 50 Body - Front
- Electrical Equipment
- 27 - Battery, Starter, Generator, Cruise control
- Battery
- Battery, checking
- Battery, charging
- Battery, disconnecting and reconnecting
- Battery, disconnecting and reconnecting
- Battery (vehicles with two-battery concept), disconnecting and connecting
- Notes
- Battery disconnecting and reconnecting sequence
- Disconnecting battery in luggage compartment, right
- Disconnecting second battery in luggage compartment, left
- Batteries, reconnecting sequence
- Connecting second battery in luggage compartment, left
- Connecting battery in luggage compartment, right
- Work steps required after reconnecting battery
- Battery - vehicles with electric closing assist, disconnecting and connecting
- Battery, removing and installing
- Battery cut-out relay J7 , removing and installing
- Battery cut-off
- Battery monitoring control module J367 , removing and installing
- Tightening Torques: Battery
- Starter
- Tightening Torques: Starter
- Generator, removing and installing
- Generator, removing and installing
- Generator features
- Ribbed belt, checking
- Generator (8-cyl. Gasoline engine), assembly overview
- Generator (8-cyl. gasoline engine), removing and installing
- Generator, 12-cyl. Gasoline engine
- Generator (12-cyl. gasoline engine), removing and installing
- Generator ribbed belt pulley, removing and installing
- Tightening Torques: Generator
- Adaptive Cruise Control (ACC)
- Cruise control system (CCS), removing and installing
- 90 - Instruments
- Instrument cluster
- Service interval indicator
- 92 - Windshield wiper and washer system
- Front windshield wiper system
- Front windshield wiper system
- General information
- Front windshield wiper system, removing and installing
- Notes
- Front windshield wiper system, removing
- Wiper arms, removing
- Plenum chamber cover, removing
- Cowl, removing
- Drivers side wiper frame, installing
- Left wiper frame, removing
- Removing wiper motor from left wiper frame
- Installing wiper motor into left wiper frame
- Right wiper frame, removing
- Removing wiper motor from wiper frame
- Installing wiper motor into right wiper frame
- Rest position of windshield wiper blades, adjusting
- Aero wipers, removing and installing
- Rain sensor G213 , removing and installing
- Windshield washer system
- Windshield washer system
- Front windshield washer system - assembly overview
- Washer fluid reservoir, removing and installing
- Windshield Washer Pump V5 , removing and installing
- Windshield Washer Fluid Level Sensor G33 , removing and installing
- Washer nozzles for front windshield washer system, removing and installing
- Spray jets for front windshield washer system, checking
- Headlamp cleaning system
- Washer Hose Couplings
- Washer hoses, repairing
- Tightening Torques: Windshield wiper and washer system
- 94 - Lights, Switches - Exterior
- Headlight with one gas-discharge bulb
- Headlight with one gas-discharge bulb
- Main headlamp with one gas-discharge bulb, assembly overview
- Main headlamp, removing and installing
- Correcting installation position of headlamp
- Bulbs for main headlamps with one gas discharge bulb, replacing
- Automatic headlamp range control adjusting motor, removing and installing
- Removing and installing Headlamp Range Control Module
- Level control system sensor, removing and installing
- Headlight range control module, coding
- Main headlamp, adjusting
- Main headlamp with two gas-discharge bulbs
- Main headlamp with two gas-discharge bulbs
- Main headlamp with two gas-discharge bulbs, assembly overview
- Main headlamp, removing and installing
- Correcting installation position of headlamp
- Bulbs for main headlamps with two gas discharge bulbs, replacing
- Automatic headlamp range control adjusting motor, removing and installing
- Removing and installing Headlamp Range Control Module
- HID lamp high beam control module, removing and installing
- Level control system sensor, removing and installing
- Headlight range control module, coding
- Main headlamp, adjusting
- Fog lamps
- Mirror turn signals and entry lights in exterior mirror
- Taillamps
- Taillamps
- Taillamp assembly in side panel - assembly overview
- Taillight in rear lid, assembly overview
- Taillamp assembly in side panel, removing and installing
- Tail light assembly in luggage compartment lid, removing and installing
- Back-up light, removing and installing
- Gap dimensions of taillamp assemblies
- Rear light function, checking
- License Plate Lights
- High-Mount Brake Light
- Steering column switch
- Access/start authorization
- Access/start authorization
- Emergency release
- Access/Start Authorization Switch E415
- Access/Start Authorization Button E408
- Access/Start Control Module J518
- Access/start authorization antennas, assembly overview
- Access/start authorization antennas, removing and installing
- Notes
- Drivers Access/Start Authorization Antenna R134 , removing and installing
- Front Passengers Access/Start Authorization Antenna R135 , removing and installing
- Access/Start Authorization Antenna (in rear bumper) R136
- Luggage Compartment Access/Start Authorization Antenna R137 , removing and installing
- Interior Access/Start Authorization Antenna 1 R138 , removing and installing
- Interior Access/Start Authorization Antenna 2 R139 , removing and installing
- Interior Access/Start Authorization Antenna 3 R154 , removing and installing
- Antenna for Access/Start Authorization, checking
- Notes
- Checking Drivers Access/Start Authorization Antenna R134
- Checking Front Passengers Access/Start Authorization Antenna R135
- Checking Access/Start Authorization Antenna (in rear bumper) R136
- Checking Luggage Compartment Access/Start Authorization Antenna R137
- Checking Interior Access/Start Authorization Antenna 1 R138
- Checking Interior Access/Start Authorization Antenna 2 R139
- Checking Interior Access/Start Authorization Antenna 3 R154
- Antenna for Access/Start Authorization, tightening torques
- Parking aid
- Parking aid
- General information
- Parking assistance system - assembly overview
- Parking Aid Control Module J446 , removing and installing
- Front parking aid sensor, removing and installing
- Rear parking aid sensor, removing and installing
- Front parking aid display, removing and installing
- Rear parking aid display, removing
- Front side marker lamp, removing and installing
- Front windshield wiper system
- 96 - Lights, Switches - Interior, Anti-theft
- Interior lights and switches
- Lights and switches in the instrument panel
- Lights and switches in the instrument panel
- Light Switch E1 , removing and installing
- Instrument panel light dimmer switch E20 and trip odometer reset switch E123 , removing and installing
- Rear window shade switch E149 and parking aid button E266 , removing and installing
- Glove Compartment Light W6 , removing and installing
- Glove Compartment Lamp Switch E26 , removing and installing
- Steering Column Adjustment Switch E167 , removing and installing
- Footwell lights , removing and installing
- Front Doors - Lights and Switches
- Front Doors - Lights and Switches
- Central switch for window regulator, in drivers door E189 , switch for rear lid remote control lock E233 , and fuel tank lid unlock button E319 , removing and installing
- Right front window switch E41 , removing and installing
- Front Interior Locking Button E308 and E309 , removing and installing
- Front Door Opener Illumination L108 and L109 , removing and installing
- Front door contact switch, removing and installing
- Front Entry Light W31 and W32 , removing and installing
- Door Warning Light W30 and W36 , removing and installing
- Rear Doors - Lights and Switches
- Rear Doors - Lights and Switches
- Rear Window Switch E52 and E54 , removing and installing
- Rear Interior Locking Button E310 and E311 , removing and installing
- Rear Door Opener Illumination L110 and L111 , removing and installing
- Rear door contact switch, removing and installing
- Rear Entry Light W33 and W34 , removing and installing
- Rear Door Warning Light W37 and W38 , removing and installing
- Luggage Compartment - Lights and Switches
- Headliner - Lights and Switches
- Headliner - Lights and Switches
- Front interior light W1 , removing and installing
- Map/Reading Light W19 and W13 , removing and installing
- Sunroof Switch E8 , removing and installing
- Rear interior and reading lights, removing and installing
- Rear Interior Lamp Button E327 and E329 , removing and installing
- Removing and installing garage door opener
- Switch panel in roof module, removing and installing
- Center Console - Lights and Switches
- Center Console - Lights and Switches
- Mirror adjustment switch E43 with mirror selector switch E48 , removing and installing
- Access/start authorization button E408 , removing and installing
- Switch panel for front seat heating/ventilation with buttons for dampening, ESP, and level control in the center console, removing and installing
- Switch panel for rear seat position and heating/ventilation memory (4-seater), removing and installing
- Switch panel for rear seat adjustment (4-seater), removing and installing
- Switch panel for rear seat lumbar adjustment (5-seater), removing and installing
- Other electrical components
- 97 - Wiring
- Vehicle Diagnostic, Testing and Information Systems
- Fuse holder, relay panel, E-boxes and control modules, removing and installing
- Fuse holder, relay panel, E-boxes and control modules, removing and installing
- Fuse holder under the instrument panel, left, removing and installing
- Auxiliary fuse box in luggage compartment, left, removing and installing
- Thermal fuse box on driver side, removing and installing
- E-box in luggage compartment, left, removing and installing
- E-box in plenum chamber, right, removing and installing
- Relay carrier in right front footwell, removing and installing
- Vehicle electrical system control module, replacing
- Vehicle electrical system control module, removing and installing
- Roof electronics control module, removing and installing
- Wiring Harnesses and Connectors, Repairing
- 27 - Battery, Starter, Generator, Cruise control
- Body Exterior
- Windows
- Body Exterior
- 50 Body - Front
- Lock carrier
- Tools
- Electrical/electronic components and locations
- Lock carrier service position, assembly overview
- Service position
- Lock carrier with attachments, assembly overview
- Lock carrier with attachments, removing and installing
- Lock carrier attachments, assembly overview
- Installation note for longmember
- Installation notes for Right Distance Regulation Sensor G259
- Right Distance Regulation Sensor G259, removing and installing
- Fenders
- Noise insulation
- Lock carrier
- 55 Hood, Lids
- Contact corrosion!
- Hood
- Locking and unlocking components of hood
- Rear lid
- Tools
- Aluminum hinge and hydraulic unit, assembly overview
- Hydraulic unit, removing and installing
- Steel hinge, assembly overview
- Gas-filled strut, removing
- Releasing gas from strut
- Rear lid, adjusting
- Basic setting of rear lid
- End plate, adjusting with lock cover removed
- End plate, adjusting with lock cover installed
- Damper, adjusting
- Lock parts with servo lid opening
- Lock parts with basic lid opening
- Fuel flap unit
- 57 Front doors, Central locking system
- Contact corrosion!
- Front door
- Tools
- Front door, assembly overview
- Door, removing and installing
- Door, adjusting
- Striker pin, adjusting
- Door handle and door lock, assembly overview
- Lock cylinder housing, removing and installing
- Door handle, removing and installing
- Door handle with cable routing (Keyless entry)
- Door lock, removing and installing
- Door Closing Assist Motor V278, assembly overview
- Door seals
- Inner door seal, removing and installing
- Outer door seal, removing and installing
- Door insulation, component location
- Door insulation, installing and removing
- Adaptation of ignition keys with radio-frequency remote control
- Batteries for the main key (foldable) with radio-frequency remote control, removing and installing
- Batteries for main key (foldable) with radio-frequency remote control (01.04 ), assembly overview
- Batteries for main key (foldable) with radio-frequency remote control (01.04 ), removing and installing
- 58 Rear doors, Window regulators
- Contact corrosion!
- Rear door
- Tools
- Rear door, assembly overview
- Door, removing and installing
- Door, adjusting
- Striker pin, adjusting
- Door handle and door lock, assembly overview
- Door handle, removing and installing
- Door handle with cable routing (Keyless entry)
- Door lock, removing and installing
- Door Closing Assist Motor V278, assembly overview
- Door seals
- Inner door seal, removing and installing
- Outer door seal, removing and installing
- Door insulation, component location
- Door insulation, installing
- 60 Sunroof
- Sliding/tilting sunroof with glass panel
- Tools
- Function
- Assembly overview
- Glass panel for sliding/tilting sunroof, removing
- Glass panel for sliding/tilting sunroof, installing
- Glass panel for sliding/tilting sunroof, adjusting (height adjustment)
- Parallel movement of glass panel, checking
- Parallel movement of glass panel, adjusting
- Panel seal, replacing
- Wind deflector, removing and installing
- Wind deflector, adjusting
- Sunroof shade, removing and installing
- Parallel movement of sunroof shade, adjusting
- Sunroof drive motor, removing and installing
- Drive motor for sliding/tilting sunroof, adjusting (zero position)
- Drive motor for sunroof shade, removing and installing
- Drive motor for wind deflector, removing and installing
- Automatic rotary switch for sunroof, removing and installing
- Sunroof shade switches, removing
- Assembly unit, removing and installing
- Operation without electricity
- Water drain hoses, cleaning
- Sunroof, adapting components
- Sunroof, coding
- Sliding/tilting sunroof with solar panel
- Tools
- Function
- Assembly overview
- Solar panel for sliding/tilting sunroof, removing
- Solar panel for sliding/tilting sunroof, installing
- Solar panel for sliding/tilting sunroof, adjusting (height adjustment)
- Parallel movement of solar panel, checking
- Parallel movement of solar panel, adjusting
- Panel seal, replacing
- Wind deflector, removing and installing
- Wind deflector, adjusting
- Trim for solar panel, removing and installing
- Sunroof drive motor, removing and installing
- Drive motor for sliding/tilting sunroof, adjusting (zero position)
- Drive motor for wind deflector, removing and installing
- Automatic rotary switch for sunroof, removing and installing
- DC converter, removing and installing
- Solar contact, removing
- Assembly unit, removing and installing
- Operation without electricity
- Water drain hoses, cleaning
- Sunroof, adapting components
- Sunroof, coding
- Sliding/tilting sunroof with glass panel
- 63 Bumpers
- Front bumper
- Bumper cover, repairing
- Tools
- Bumper cover, assembly overview
- Bumper cover, removing and installing
- Front bumper attachments
- Front bumper, substructure
- Installation notes for Right Distance Regulation Sensor G259
- Automatic distance regulation (ADR) sensor, removing and installing
- Cover piece, removing and installing
- Rear bumper
- Front bumper
- 64 Glass, Windows
- Flush bonded windows
- Tools
- Materials
- Windshield, repairing
- Windshield, assembly overview
- Plenum chamber cover, removing and installing
- Windshield, removing
- Windshield, installing
- New windshield with viewing window for VIN for vehicles without VIN, preparing
- Rear window, assembly overview
- Undamaged rear window, removing
- Rear window, installing
- Preparing old undamaged window for glazing
- Preparing new window for glazing
- Preparing window flange for glazing
- Installation notes
- Minimum curing time
- Repairing paint damage
- Cleaning when soiled by adhesive sealing material
- Front door window
- Rear door window
- Flush bonded windows
- 66 Exterior equipment
- Wheel housing liner, removing and installing
- Rearview mirror
- Radiator grille
- Roof moldings
- Protective moldings
- Sill panel trim
- 50 Body - Front
- Electrical Equipment
- 27 - Battery, Starter, Generator, Cruise control
- Battery
- Battery, checking
- Battery, charging
- Battery, disconnecting and reconnecting
- Battery, disconnecting and reconnecting
- Battery (vehicles with two-battery concept), disconnecting and connecting
- Notes
- Battery disconnecting and reconnecting sequence
- Disconnecting battery in luggage compartment, right
- Disconnecting second battery in luggage compartment, left
- Batteries, reconnecting sequence
- Connecting second battery in luggage compartment, left
- Connecting battery in luggage compartment, right
- Work steps required after reconnecting battery
- Battery - vehicles with electric closing assist, disconnecting and connecting
- Battery, removing and installing
- Battery cut-out relay J7 , removing and installing
- Battery cut-off
- Battery monitoring control module J367 , removing and installing
- Tightening Torques: Battery
- Starter
- Tightening Torques: Starter
- Generator, removing and installing
- Generator, removing and installing
- Generator features
- Ribbed belt, checking
- Generator (8-cyl. Gasoline engine), assembly overview
- Generator (8-cyl. gasoline engine), removing and installing
- Generator, 12-cyl. Gasoline engine
- Generator (12-cyl. gasoline engine), removing and installing
- Generator ribbed belt pulley, removing and installing
- Tightening Torques: Generator
- Adaptive Cruise Control (ACC)
- Cruise control system (CCS), removing and installing
- 90 - Instruments
- Instrument cluster
- Service interval indicator
- 92 - Windshield wiper and washer system
- Front windshield wiper system
- Front windshield wiper system
- General information
- Front windshield wiper system, removing and installing
- Notes
- Front windshield wiper system, removing
- Wiper arms, removing
- Plenum chamber cover, removing
- Cowl, removing
- Drivers side wiper frame, installing
- Left wiper frame, removing
- Removing wiper motor from left wiper frame
- Installing wiper motor into left wiper frame
- Right wiper frame, removing
- Removing wiper motor from wiper frame
- Installing wiper motor into right wiper frame
- Rest position of windshield wiper blades, adjusting
- Aero wipers, removing and installing
- Rain sensor G213 , removing and installing
- Windshield washer system
- Windshield washer system
- Front windshield washer system - assembly overview
- Washer fluid reservoir, removing and installing
- Windshield Washer Pump V5 , removing and installing
- Windshield Washer Fluid Level Sensor G33 , removing and installing
- Washer nozzles for front windshield washer system, removing and installing
- Spray jets for front windshield washer system, checking
- Headlamp cleaning system
- Washer Hose Couplings
- Washer hoses, repairing
- Tightening Torques: Windshield wiper and washer system
- 94 - Lights, Switches - Exterior
- Headlight with one gas-discharge bulb
- Headlight with one gas-discharge bulb
- Main headlamp with one gas-discharge bulb, assembly overview
- Main headlamp, removing and installing
- Correcting installation position of headlamp
- Bulbs for main headlamps with one gas discharge bulb, replacing
- Automatic headlamp range control adjusting motor, removing and installing
- Removing and installing Headlamp Range Control Module
- Level control system sensor, removing and installing
- Headlight range control module, coding
- Main headlamp, adjusting
- Main headlamp with two gas-discharge bulbs
- Main headlamp with two gas-discharge bulbs
- Main headlamp with two gas-discharge bulbs, assembly overview
- Main headlamp, removing and installing
- Correcting installation position of headlamp
- Bulbs for main headlamps with two gas discharge bulbs, replacing
- Automatic headlamp range control adjusting motor, removing and installing
- Removing and installing Headlamp Range Control Module
- HID lamp high beam control module, removing and installing
- Level control system sensor, removing and installing
- Headlight range control module, coding
- Main headlamp, adjusting
- Fog lamps
- Mirror turn signals and entry lights in exterior mirror
- Taillamps
- Taillamps
- Taillamp assembly in side panel - assembly overview
- Taillight in rear lid, assembly overview
- Taillamp assembly in side panel, removing and installing
- Tail light assembly in luggage compartment lid, removing and installing
- Back-up light, removing and installing
- Gap dimensions of taillamp assemblies
- Rear light function, checking
- License Plate Lights
- High-Mount Brake Light
- Steering column switch
- Access/start authorization
- Access/start authorization
- Emergency release
- Access/Start Authorization Switch E415
- Access/Start Authorization Button E408
- Access/Start Control Module J518
- Access/start authorization antennas, assembly overview
- Access/start authorization antennas, removing and installing
- Notes
- Drivers Access/Start Authorization Antenna R134 , removing and installing
- Front Passengers Access/Start Authorization Antenna R135 , removing and installing
- Access/Start Authorization Antenna (in rear bumper) R136
- Luggage Compartment Access/Start Authorization Antenna R137 , removing and installing
- Interior Access/Start Authorization Antenna 1 R138 , removing and installing
- Interior Access/Start Authorization Antenna 2 R139 , removing and installing
- Interior Access/Start Authorization Antenna 3 R154 , removing and installing
- Antenna for Access/Start Authorization, checking
- Notes
- Checking Drivers Access/Start Authorization Antenna R134
- Checking Front Passengers Access/Start Authorization Antenna R135
- Checking Access/Start Authorization Antenna (in rear bumper) R136
- Checking Luggage Compartment Access/Start Authorization Antenna R137
- Checking Interior Access/Start Authorization Antenna 1 R138
- Checking Interior Access/Start Authorization Antenna 2 R139
- Checking Interior Access/Start Authorization Antenna 3 R154
- Antenna for Access/Start Authorization, tightening torques
- Parking aid
- Parking aid
- General information
- Parking assistance system - assembly overview
- Parking Aid Control Module J446 , removing and installing
- Front parking aid sensor, removing and installing
- Rear parking aid sensor, removing and installing
- Front parking aid display, removing and installing
- Rear parking aid display, removing
- Front side marker lamp, removing and installing
- Front windshield wiper system
- 96 - Lights, Switches - Interior, Anti-theft
- Interior lights and switches
- Lights and switches in the instrument panel
- Lights and switches in the instrument panel
- Light Switch E1 , removing and installing
- Instrument panel light dimmer switch E20 and trip odometer reset switch E123 , removing and installing
- Rear window shade switch E149 and parking aid button E266 , removing and installing
- Glove Compartment Light W6 , removing and installing
- Glove Compartment Lamp Switch E26 , removing and installing
- Steering Column Adjustment Switch E167 , removing and installing
- Footwell lights , removing and installing
- Front Doors - Lights and Switches
- Front Doors - Lights and Switches
- Central switch for window regulator, in drivers door E189 , switch for rear lid remote control lock E233 , and fuel tank lid unlock button E319 , removing and installing
- Right front window switch E41 , removing and installing
- Front Interior Locking Button E308 and E309 , removing and installing
- Front Door Opener Illumination L108 and L109 , removing and installing
- Front door contact switch, removing and installing
- Front Entry Light W31 and W32 , removing and installing
- Door Warning Light W30 and W36 , removing and installing
- Rear Doors - Lights and Switches
- Rear Doors - Lights and Switches
- Rear Window Switch E52 and E54 , removing and installing
- Rear Interior Locking Button E310 and E311 , removing and installing
- Rear Door Opener Illumination L110 and L111 , removing and installing
- Rear door contact switch, removing and installing
- Rear Entry Light W33 and W34 , removing and installing
- Rear Door Warning Light W37 and W38 , removing and installing
- Luggage Compartment - Lights and Switches
- Headliner - Lights and Switches
- Headliner - Lights and Switches
- Front interior light W1 , removing and installing
- Map/Reading Light W19 and W13 , removing and installing
- Sunroof Switch E8 , removing and installing
- Rear interior and reading lights, removing and installing
- Rear Interior Lamp Button E327 and E329 , removing and installing
- Removing and installing garage door opener
- Switch panel in roof module, removing and installing
- Center Console - Lights and Switches
- Center Console - Lights and Switches
- Mirror adjustment switch E43 with mirror selector switch E48 , removing and installing
- Access/start authorization button E408 , removing and installing
- Switch panel for front seat heating/ventilation with buttons for dampening, ESP, and level control in the center console, removing and installing
- Switch panel for rear seat position and heating/ventilation memory (4-seater), removing and installing
- Switch panel for rear seat adjustment (4-seater), removing and installing
- Switch panel for rear seat lumbar adjustment (5-seater), removing and installing
- Other electrical components
- 97 - Wiring
- Vehicle Diagnostic, Testing and Information Systems
- Fuse holder, relay panel, E-boxes and control modules, removing and installing
- Fuse holder, relay panel, E-boxes and control modules, removing and installing
- Fuse holder under the instrument panel, left, removing and installing
- Auxiliary fuse box in luggage compartment, left, removing and installing
- Thermal fuse box on driver side, removing and installing
- E-box in luggage compartment, left, removing and installing
- E-box in plenum chamber, right, removing and installing
- Relay carrier in right front footwell, removing and installing
- Vehicle electrical system control module, replacing
- Vehicle electrical system control module, removing and installing
- Roof electronics control module, removing and installing
- Wiring Harnesses and Connectors, Repairing
- 27 - Battery, Starter, Generator, Cruise control
- Body Exterior
- Door Locks
- Brakes
- Anti-Lock Brakes
- Brake System
- 00 - Technical Data
- 45 - Anti-Lock Braking System
- ABS, General Information
- ABS, Repair Information
- VAS 5051, Connecting and Selecting Functions
- Electrical and Electronic Component Locations
- Level Control System Warning Lamps, Malfunction
- Hydraulic Unit, Brake Booster and Brake Master Cylinder, Assembly Overview
- ABS Components, Front and Rear Axles
- Electronic Stabilization Program Components, Removing and Installing
- 46 - Brakes - Mechanical Components
- 47 - Brakes - Hydraulic Components
- Brake System
- Mechanical - Hydraulic
- Brake System
- 00 - Technical Data
- 45 - Anti-Lock Braking System
- ABS, General Information
- ABS, Repair Information
- VAS 5051, Connecting and Selecting Functions
- Electrical and Electronic Component Locations
- Level Control System Warning Lamps, Malfunction
- Hydraulic Unit, Brake Booster and Brake Master Cylinder, Assembly Overview
- ABS Components, Front and Rear Axles
- Electronic Stabilization Program Components, Removing and Installing
- 46 - Brakes - Mechanical Components
- 47 - Brakes - Hydraulic Components
- Brake System
- Parking Brake System
- 00 - Technical Data
- 45 - Anti-Lock Braking System
- ABS, General Information
- ABS, Repair Information
- VAS 5051, Connecting and Selecting Functions
- Electrical and Electronic Component Locations
- Level Control System Warning Lamps, Malfunction
- Hydraulic Unit, Brake Booster and Brake Master Cylinder, Assembly Overview
- ABS Components, Front and Rear Axles
- Electronic Stabilization Program Components, Removing and Installing
- 46 - Brakes - Mechanical Components
- 47 - Brakes - Hydraulic Components
- Traction Control
- Brake System
- 00 - Technical Data
- 45 - Anti-Lock Braking System
- ABS, General Information
- ABS, Repair Information
- VAS 5051, Connecting and Selecting Functions
- Electrical and Electronic Component Locations
- Level Control System Warning Lamps, Malfunction
- Hydraulic Unit, Brake Booster and Brake Master Cylinder, Assembly Overview
- ABS Components, Front and Rear Axles
- Electronic Stabilization Program Components, Removing and Installing
- 46 - Brakes - Mechanical Components
- 47 - Brakes - Hydraulic Components
- Brake System
- Anti-Lock Brakes
- Drivelines & Axles
- Axle Shafts
- Suspension, Wheels, Steering
- 00 - General, Technical Data
- 40 - Front Suspension
- Front Suspension, Servicing
- Front Suspension Components, Assembly Overview
- Notes
- Air Spring Damper, Removing and Installing
- Air Spring Damper, Filling
- Mounting Bracket, Removing and Installing
- Upper Control Arm, Removing and Installing
- Upper Control Arm Bonded Rubber Bushing, Replacing
- Wheel Bearing Housing, Removing and Installing
- Wheel Bearing, Assembly Overview
- Wheel Bearing Unit, Removing and Installing
- Subframe, Lower Link and Stabilizer Bar, Assembly Overview
- Notes
- Subframe, Removing and Installing
- Subframe, Front Rubber Bonded Bushings, Replacing
- Subframe, Rear Rubber Bonded Bushing, Replacing
- Subframe, Rear Hydraulic Rubber Bonded Bushing, Replacing
- Stabilizer Bar, Removing and Installing
- Track Control Arm, Removing and Installing
- Guide Link, Removing and Installing
- Drive Axle, Overview
- I - Drive Axle with Triple Roller Joint AAR 2900, Assembly Overview
- II - Drive Axle with Peened Triple Roller Joint AAR 3300i, Assembly Overview
- 42 - Rear Suspension
- Rear Axle, Servicing
- I - Subframe, Assembly Overview
- II - Control Arm, Tie Rod and Air Spring Damper, Assembly Overview
- Notes
- Air Spring Damper, Removing and Installing
- Air Spring Damper, Filling
- Stabilizer Bar, Removing and Installing
- Upper Control Arm, Removing and Installing
- Tie Rod, Removing and Installing
- Stabilizer Bar to Lower Control Arm Connecting Links, Removing and Installing
- Tie Rod to Lower Control Arm Connecting Links, Removing and Installing
- Lower Control Arm, Removing and Installing
- III - Wheel Bearing, Assembly Overview
- IV - Drive Axle, Assembly Overview
- Drive Axle, Servicing
- 43 - Self Leveling Suspension
- Vehicle Lift Mode
- Self-Leveling Suspension, Servicing
- Notes
- Air Spring Damper and Self-Leveling Suspension, Fault Finding
- Self-Leveling Suspension, Components Locations
- Level Control System Control Module, Removing and Installing
- Front Level Control System Sensors, Removing and Installing
- Front Wheel Acceleration Sensors, Removing and Installing
- Front Body Acceleration Sensor, Removing and Installing
- Rear Level Control System Sensors, Removing and Installing
- Rear Wheel Acceleration Sensors, Removing and Installing
- Rear Body Acceleration Sensor, Removing and Installing
- Air Hose, Servicing
- Air Supply Unit with Solenoid Valve Block, Assembly Overview
- Air Supply Unit, Removing and Installing
- Solenoid Valve Block, Line Arrangement
- Solenoid Valve, Removing and Installing
- Self-Leveling Suspension, Basic Setting
- Ride Height, Measuring
- 44 - Wheels, Tires, Wheel Alignment
- Wheel Bolts, Tightening Specifications
- Wheel Alignment
- Notes
- Wheel Alignment, General Information
- Electronic Stabilization Program
- Vehicle Data Label
- Test Prerequisites
- Measurement Preparations
- Rim Run-Out Compensation
- Vehicle Alignment, Overview
- Wheel Alignment Specifications
- Front Axle Camber, Centering
- Rear Axle Camber, Adjusting
- Rear Axle Toe, Adjusting
- Front Axle Toe, Adjusting
- Vehicle, Raising
- Toe Constant S, Adjusting
- Spring Blocks, Installing
- Tire Pressure Monitoring, Generation 1, Servicing
- Tire Pressure Monitoring, Generation 2, Servicing
- Notes
- Tire Pressure Monitoring, Component Overview
- Tire Pressure Sensor and Metal Valve, Component Overview
- Tire Pressure Sensor, Removing and Installing
- Metal Valve, Removing and Installing
- Left Front Tire Pressure Monitoring Transmitter, Removing and Installing
- Right Front Tire Pressure Monitoring Transmitter, Removing and Installing
- Left Rear Tire Pressure Monitoring Transmitter, Removing and Installing
- Right Rear Tire Pressure Monitoring Transmitter, Removing and Installing
- Tire Pressure Monitoring Antenna, Removing and Installing
- Tire Pressure Monitoring Control Module, Removing and Installing
- Tires, Wheels with Tire Pressure Monitoring, Mounting
- Wheels and Tires
- Adaptive Cruise Control
- Adaptive Cruise Control, Calibration
- 48 - Steering
- Steering Column
- Steering Gear, Assembly Overview
- Power Steering, Servicing
- Power Steering Pump
- Notes
- Power Steering Pump, 8-Cylinder, Checking Supply Pressure
- Power Steering Pump, 8-Cylinder, Assembly Overview
- Power Steering Pump, 8-Cylinder, Removing and Installing
- Power Steering Pump, W12 Engine, Checking Supply Pressure
- Power Steering Pump, W12 Engine, Assembly Overview
- Power Steering Pump, W12 Engine, Removing and Installing
- Power Steering Fluid Level, Checking
- Steering System, Bleeding
- Steering System, Checking for Leaks
- Suspension, Wheels, Steering
- Differentials & Drive Axles
- Servicing 5 SPD. Automatic Transmission 01L
- 00 General, Technical Data
- 32 Torque converter
- 37 Automatic Transmission - Controls, Housing
- Transmission, attaching to assembly stand
- Planetary gear, disassembling and assembling
- Clutch "F" with free-running hub. disassembling and assembling
- Tower "I", disassembling and assembling
- Clutch "C" with sun shaft, assembly overview
- Clutch "C" with sun shaft, disassembling and assembling
- Clutch "D" , assembly overview
- Clutch "E" - component overview
- Clutch "D/E" , disassembling and assembling
- Planetary drive, assembly overview
- Planetary drive, disassembling and assembling
- Assembling tower "I"
- Tower "II", disassembling and assembling
- Shift rod, removing and installing
- 39F Final drive, Differential (front)
- ATF pump, disassembling and assembling
- Oil tubes
- Transmission components, evaluating wear
- Evaluating wear by evaluating ATF color and impurities
- Clutch "F" with freewheel
- Clutch "C" with sun shaft
- Notes
- Checking coated and outer plate for wear
- Checking freedom of movement of valve ball in piston "C"
- Signs of wear at inner circumference of cylinder "C" caused by coated plate
- Signs of wear at outer circumference of cylinder "C" caused by coated plate
- Checking brass sleeves of sun shaft for wear
- Checking rectangular rings for wear
- Clutch "D"
- Clutch "E"
- Planetary drive
- Notes
- Checking outer splines of plate carrier "E" for notches caused by coated plate
- Checking needle bearing of shaft planetary carrier "I" for wear
- Checking contact surfaces, brass sleeve and needle bearing of shaft planetary carrier "II" for wear
- Checking contact surfaces, brass sleeve and needle bearing of shaft planetary carrier "III" for wear
- Clutch "A"
- Clutch "B"
- ATF pump
- 39R Final drive, Differential (rear)
- Suspension, Wheels, Steering
- 00 - General, Technical Data
- 40 - Front Suspension
- Front Suspension, Servicing
- Front Suspension Components, Assembly Overview
- Notes
- Air Spring Damper, Removing and Installing
- Air Spring Damper, Filling
- Mounting Bracket, Removing and Installing
- Upper Control Arm, Removing and Installing
- Upper Control Arm Bonded Rubber Bushing, Replacing
- Wheel Bearing Housing, Removing and Installing
- Wheel Bearing, Assembly Overview
- Wheel Bearing Unit, Removing and Installing
- Subframe, Lower Link and Stabilizer Bar, Assembly Overview
- Notes
- Subframe, Removing and Installing
- Subframe, Front Rubber Bonded Bushings, Replacing
- Subframe, Rear Rubber Bonded Bushing, Replacing
- Subframe, Rear Hydraulic Rubber Bonded Bushing, Replacing
- Stabilizer Bar, Removing and Installing
- Track Control Arm, Removing and Installing
- Guide Link, Removing and Installing
- Drive Axle, Overview
- I - Drive Axle with Triple Roller Joint AAR 2900, Assembly Overview
- II - Drive Axle with Peened Triple Roller Joint AAR 3300i, Assembly Overview
- 42 - Rear Suspension
- Rear Axle, Servicing
- I - Subframe, Assembly Overview
- II - Control Arm, Tie Rod and Air Spring Damper, Assembly Overview
- Notes
- Air Spring Damper, Removing and Installing
- Air Spring Damper, Filling
- Stabilizer Bar, Removing and Installing
- Upper Control Arm, Removing and Installing
- Tie Rod, Removing and Installing
- Stabilizer Bar to Lower Control Arm Connecting Links, Removing and Installing
- Tie Rod to Lower Control Arm Connecting Links, Removing and Installing
- Lower Control Arm, Removing and Installing
- III - Wheel Bearing, Assembly Overview
- IV - Drive Axle, Assembly Overview
- Drive Axle, Servicing
- 43 - Self Leveling Suspension
- Vehicle Lift Mode
- Self-Leveling Suspension, Servicing
- Notes
- Air Spring Damper and Self-Leveling Suspension, Fault Finding
- Self-Leveling Suspension, Components Locations
- Level Control System Control Module, Removing and Installing
- Front Level Control System Sensors, Removing and Installing
- Front Wheel Acceleration Sensors, Removing and Installing
- Front Body Acceleration Sensor, Removing and Installing
- Rear Level Control System Sensors, Removing and Installing
- Rear Wheel Acceleration Sensors, Removing and Installing
- Rear Body Acceleration Sensor, Removing and Installing
- Air Hose, Servicing
- Air Supply Unit with Solenoid Valve Block, Assembly Overview
- Air Supply Unit, Removing and Installing
- Solenoid Valve Block, Line Arrangement
- Solenoid Valve, Removing and Installing
- Self-Leveling Suspension, Basic Setting
- Ride Height, Measuring
- 44 - Wheels, Tires, Wheel Alignment
- Wheel Bolts, Tightening Specifications
- Wheel Alignment
- Notes
- Wheel Alignment, General Information
- Electronic Stabilization Program
- Vehicle Data Label
- Test Prerequisites
- Measurement Preparations
- Rim Run-Out Compensation
- Vehicle Alignment, Overview
- Wheel Alignment Specifications
- Front Axle Camber, Centering
- Rear Axle Camber, Adjusting
- Rear Axle Toe, Adjusting
- Front Axle Toe, Adjusting
- Vehicle, Raising
- Toe Constant S, Adjusting
- Spring Blocks, Installing
- Tire Pressure Monitoring, Generation 1, Servicing
- Tire Pressure Monitoring, Generation 2, Servicing
- Notes
- Tire Pressure Monitoring, Component Overview
- Tire Pressure Sensor and Metal Valve, Component Overview
- Tire Pressure Sensor, Removing and Installing
- Metal Valve, Removing and Installing
- Left Front Tire Pressure Monitoring Transmitter, Removing and Installing
- Right Front Tire Pressure Monitoring Transmitter, Removing and Installing
- Left Rear Tire Pressure Monitoring Transmitter, Removing and Installing
- Right Rear Tire Pressure Monitoring Transmitter, Removing and Installing
- Tire Pressure Monitoring Antenna, Removing and Installing
- Tire Pressure Monitoring Control Module, Removing and Installing
- Tires, Wheels with Tire Pressure Monitoring, Mounting
- Wheels and Tires
- Adaptive Cruise Control
- Adaptive Cruise Control, Calibration
- 48 - Steering
- Steering Column
- Steering Gear, Assembly Overview
- Power Steering, Servicing
- Power Steering Pump
- Notes
- Power Steering Pump, 8-Cylinder, Checking Supply Pressure
- Power Steering Pump, 8-Cylinder, Assembly Overview
- Power Steering Pump, 8-Cylinder, Removing and Installing
- Power Steering Pump, W12 Engine, Checking Supply Pressure
- Power Steering Pump, W12 Engine, Assembly Overview
- Power Steering Pump, W12 Engine, Removing and Installing
- Power Steering Fluid Level, Checking
- Steering System, Bleeding
- Steering System, Checking for Leaks
- Servicing 5 SPD. Automatic Transmission 01L
- Driveshaft & Universal Joints
- 5 SPD. Automatic Transmission 01L All Wheel Drive
- 00 General, Technical Data
- 32 Torque converter
- 37 Automatic Transmission - Controls, Housing
- VAS 5051, connecting
- Electrical/electronic components and installed locations
- Electrical/electronic components and installed locations
- Notes
- Component location of Transmission Control Module (TCM) -J217-
- Transmission Control Module (TCM) -J217-
- Data Link Connector (DLC)
- Multi-Function Transmission Range (TR) Switch -F125-
- Wiring harness with integrated Transmission Fluid Temperature Sensor -G93-
- Valve body
- Transmission Vehicle Speed Sensor (VSS) -G38- / Transmission Output Speed (RPM) Sensor G195
- Transmission Input Speed (RPM) Sensor G182
- Tiptronic Switch -F189-
- Shift lock solenoid -N110-
- Ignition Switch Key Lock Solenoid -N376-
- Steering wheel Tiptronic switch -E389-
- Transmission Range (TR) display -Y6-
- Electrical/electronic components and installed locations
- Selector lever mechanism, servicing
- Selector lever mechanism, servicing
- Selector lever handle, removing and installing
- Shift mechanism, removing and installing
- Shift mechanism, disassembling and assembling
- Selector lever, releasing when there is no electrical power
- Selector lever cable, checking and adjusting
- Selector lever cable, removing and installing
- Transmission, removing and installing (vehicles with 12-cylinder engine)
- ATF level, checking and topping off
- Schematic overview of power transfer, All Wheel Drive (AWD)
- ATF lines and ATF cooler
- 38 Automatic Transmission - Gears, Hydraulic controls
- 39F Final drive, Differential (front)
- 39R Final drive, Differential (rear)
- Driveshaft, removing and installing
- Final drive gear oil
- Driveshaft flange seal
- Drive flange seals, replacing (rear final drive installed)
- Radial play at driveshaft flange, determining
- Rear final drive, removing and installing
- Rear final drive, disassembling and assembling
- Differential, disassembling and assembling
- Differential, disassembling and assembling
- Notes
- Clamp rear final drive in assembly fixture
- Driving small tapered roller bearing outer race out of housing
- Pressing small tapered roller bearing outer race into housing to stop
- Pulling off small tapered roller bearing inner race
- Pressing on small tapered roller bearing inner race
- Pulling off large tapered roller bearing inner race
- Pressing on large tapered roller bearing inner race
- Driving off tapered roller bearing outer race from cover
- Pressing tapered roller bearing outer race into cover
- Driving ring gear from housing
- Installing ring gear
- Installing small differential bevel gears
- Adjusting differential bevel gears
- Table of adjustment shims
- Differential, disassembling and assembling
- Differential, removing and installing
- Pinion shaft, servicing
- Pinion shaft, removing and installing, disassembling and assembling
- Notes
- Clamping rear final drive in assembly fixture
- Removing nut for pinion
- Pulling off flange
- Pulling out seal for driveshaft flange
- Pressing drive pinion off tapered roller bearing inner race
- Pulling off small tapered roller bearing outer race
- Driving out large outer race/tapered roller bearing
- Pressing off large tapered roller bearing inner race
- Pressing on large tapered roller bearing inner race
- Pulling in large tapered roller bearing outer race
- Pressing in small tapered roller bearing outer race
- Inserting small tapered roller bearing inner race
- Inserting O-ring
- Driving in seal for driveshaft flange
- Installing flange
- Tightening nut for pinion and adjusting friction torque
- Measuring friction torque
- Securing nut for pinion
- Pinion shaft, removing and installing, disassembling and assembling
- Ring gear and pinion, adjusting
- 5 SPD. Automatic Transmission 01L All Wheel Drive
- Wheel Hubs
- Suspension, Wheels, Steering
- 00 - General, Technical Data
- 40 - Front Suspension
- Front Suspension, Servicing
- Front Suspension Components, Assembly Overview
- Notes
- Air Spring Damper, Removing and Installing
- Air Spring Damper, Filling
- Mounting Bracket, Removing and Installing
- Upper Control Arm, Removing and Installing
- Upper Control Arm Bonded Rubber Bushing, Replacing
- Wheel Bearing Housing, Removing and Installing
- Wheel Bearing, Assembly Overview
- Wheel Bearing Unit, Removing and Installing
- Subframe, Lower Link and Stabilizer Bar, Assembly Overview
- Notes
- Subframe, Removing and Installing
- Subframe, Front Rubber Bonded Bushings, Replacing
- Subframe, Rear Rubber Bonded Bushing, Replacing
- Subframe, Rear Hydraulic Rubber Bonded Bushing, Replacing
- Stabilizer Bar, Removing and Installing
- Track Control Arm, Removing and Installing
- Guide Link, Removing and Installing
- Drive Axle, Overview
- I - Drive Axle with Triple Roller Joint AAR 2900, Assembly Overview
- II - Drive Axle with Peened Triple Roller Joint AAR 3300i, Assembly Overview
- 42 - Rear Suspension
- Rear Axle, Servicing
- I - Subframe, Assembly Overview
- II - Control Arm, Tie Rod and Air Spring Damper, Assembly Overview
- Notes
- Air Spring Damper, Removing and Installing
- Air Spring Damper, Filling
- Stabilizer Bar, Removing and Installing
- Upper Control Arm, Removing and Installing
- Tie Rod, Removing and Installing
- Stabilizer Bar to Lower Control Arm Connecting Links, Removing and Installing
- Tie Rod to Lower Control Arm Connecting Links, Removing and Installing
- Lower Control Arm, Removing and Installing
- III - Wheel Bearing, Assembly Overview
- IV - Drive Axle, Assembly Overview
- Drive Axle, Servicing
- 43 - Self Leveling Suspension
- Vehicle Lift Mode
- Self-Leveling Suspension, Servicing
- Notes
- Air Spring Damper and Self-Leveling Suspension, Fault Finding
- Self-Leveling Suspension, Components Locations
- Level Control System Control Module, Removing and Installing
- Front Level Control System Sensors, Removing and Installing
- Front Wheel Acceleration Sensors, Removing and Installing
- Front Body Acceleration Sensor, Removing and Installing
- Rear Level Control System Sensors, Removing and Installing
- Rear Wheel Acceleration Sensors, Removing and Installing
- Rear Body Acceleration Sensor, Removing and Installing
- Air Hose, Servicing
- Air Supply Unit with Solenoid Valve Block, Assembly Overview
- Air Supply Unit, Removing and Installing
- Solenoid Valve Block, Line Arrangement
- Solenoid Valve, Removing and Installing
- Self-Leveling Suspension, Basic Setting
- Ride Height, Measuring
- 44 - Wheels, Tires, Wheel Alignment
- Wheel Bolts, Tightening Specifications
- Wheel Alignment
- Notes
- Wheel Alignment, General Information
- Electronic Stabilization Program
- Vehicle Data Label
- Test Prerequisites
- Measurement Preparations
- Rim Run-Out Compensation
- Vehicle Alignment, Overview
- Wheel Alignment Specifications
- Front Axle Camber, Centering
- Rear Axle Camber, Adjusting
- Rear Axle Toe, Adjusting
- Front Axle Toe, Adjusting
- Vehicle, Raising
- Toe Constant S, Adjusting
- Spring Blocks, Installing
- Tire Pressure Monitoring, Generation 1, Servicing
- Tire Pressure Monitoring, Generation 2, Servicing
- Notes
- Tire Pressure Monitoring, Component Overview
- Tire Pressure Sensor and Metal Valve, Component Overview
- Tire Pressure Sensor, Removing and Installing
- Metal Valve, Removing and Installing
- Left Front Tire Pressure Monitoring Transmitter, Removing and Installing
- Right Front Tire Pressure Monitoring Transmitter, Removing and Installing
- Left Rear Tire Pressure Monitoring Transmitter, Removing and Installing
- Right Rear Tire Pressure Monitoring Transmitter, Removing and Installing
- Tire Pressure Monitoring Antenna, Removing and Installing
- Tire Pressure Monitoring Control Module, Removing and Installing
- Tires, Wheels with Tire Pressure Monitoring, Mounting
- Wheels and Tires
- Adaptive Cruise Control
- Adaptive Cruise Control, Calibration
- 48 - Steering
- Steering Column
- Steering Gear, Assembly Overview
- Power Steering, Servicing
- Power Steering Pump
- Notes
- Power Steering Pump, 8-Cylinder, Checking Supply Pressure
- Power Steering Pump, 8-Cylinder, Assembly Overview
- Power Steering Pump, 8-Cylinder, Removing and Installing
- Power Steering Pump, W12 Engine, Checking Supply Pressure
- Power Steering Pump, W12 Engine, Assembly Overview
- Power Steering Pump, W12 Engine, Removing and Installing
- Power Steering Fluid Level, Checking
- Steering System, Bleeding
- Steering System, Checking for Leaks
- Suspension, Wheels, Steering
- Axle Shafts
- Electrical
- Body Electrical
- Electrical Equipment
- 27 - Battery, Starter, Generator, Cruise control
- Battery
- Battery, checking
- Battery, charging
- Battery, disconnecting and reconnecting
- Battery, disconnecting and reconnecting
- Battery (vehicles with two-battery concept), disconnecting and connecting
- Notes
- Battery disconnecting and reconnecting sequence
- Disconnecting battery in luggage compartment, right
- Disconnecting second battery in luggage compartment, left
- Batteries, reconnecting sequence
- Connecting second battery in luggage compartment, left
- Connecting battery in luggage compartment, right
- Work steps required after reconnecting battery
- Battery - vehicles with electric closing assist, disconnecting and connecting
- Battery, removing and installing
- Battery cut-out relay J7 , removing and installing
- Battery cut-off
- Battery monitoring control module J367 , removing and installing
- Tightening Torques: Battery
- Starter
- Tightening Torques: Starter
- Generator, removing and installing
- Generator, removing and installing
- Generator features
- Ribbed belt, checking
- Generator (8-cyl. Gasoline engine), assembly overview
- Generator (8-cyl. gasoline engine), removing and installing
- Generator, 12-cyl. Gasoline engine
- Generator (12-cyl. gasoline engine), removing and installing
- Generator ribbed belt pulley, removing and installing
- Tightening Torques: Generator
- Adaptive Cruise Control (ACC)
- Cruise control system (CCS), removing and installing
- 90 - Instruments
- Instrument cluster
- Service interval indicator
- 92 - Windshield wiper and washer system
- Front windshield wiper system
- Front windshield wiper system
- General information
- Front windshield wiper system, removing and installing
- Notes
- Front windshield wiper system, removing
- Wiper arms, removing
- Plenum chamber cover, removing
- Cowl, removing
- Drivers side wiper frame, installing
- Left wiper frame, removing
- Removing wiper motor from left wiper frame
- Installing wiper motor into left wiper frame
- Right wiper frame, removing
- Removing wiper motor from wiper frame
- Installing wiper motor into right wiper frame
- Rest position of windshield wiper blades, adjusting
- Aero wipers, removing and installing
- Rain sensor G213 , removing and installing
- Windshield washer system
- Windshield washer system
- Front windshield washer system - assembly overview
- Washer fluid reservoir, removing and installing
- Windshield Washer Pump V5 , removing and installing
- Windshield Washer Fluid Level Sensor G33 , removing and installing
- Washer nozzles for front windshield washer system, removing and installing
- Spray jets for front windshield washer system, checking
- Headlamp cleaning system
- Washer Hose Couplings
- Washer hoses, repairing
- Tightening Torques: Windshield wiper and washer system
- 94 - Lights, Switches - Exterior
- Headlight with one gas-discharge bulb
- Headlight with one gas-discharge bulb
- Main headlamp with one gas-discharge bulb, assembly overview
- Main headlamp, removing and installing
- Correcting installation position of headlamp
- Bulbs for main headlamps with one gas discharge bulb, replacing
- Automatic headlamp range control adjusting motor, removing and installing
- Removing and installing Headlamp Range Control Module
- Level control system sensor, removing and installing
- Headlight range control module, coding
- Main headlamp, adjusting
- Main headlamp with two gas-discharge bulbs
- Main headlamp with two gas-discharge bulbs
- Main headlamp with two gas-discharge bulbs, assembly overview
- Main headlamp, removing and installing
- Correcting installation position of headlamp
- Bulbs for main headlamps with two gas discharge bulbs, replacing
- Automatic headlamp range control adjusting motor, removing and installing
- Removing and installing Headlamp Range Control Module
- HID lamp high beam control module, removing and installing
- Level control system sensor, removing and installing
- Headlight range control module, coding
- Main headlamp, adjusting
- Fog lamps
- Mirror turn signals and entry lights in exterior mirror
- Taillamps
- Taillamps
- Taillamp assembly in side panel - assembly overview
- Taillight in rear lid, assembly overview
- Taillamp assembly in side panel, removing and installing
- Tail light assembly in luggage compartment lid, removing and installing
- Back-up light, removing and installing
- Gap dimensions of taillamp assemblies
- Rear light function, checking
- License Plate Lights
- High-Mount Brake Light
- Steering column switch
- Access/start authorization
- Access/start authorization
- Emergency release
- Access/Start Authorization Switch E415
- Access/Start Authorization Button E408
- Access/Start Control Module J518
- Access/start authorization antennas, assembly overview
- Access/start authorization antennas, removing and installing
- Notes
- Drivers Access/Start Authorization Antenna R134 , removing and installing
- Front Passengers Access/Start Authorization Antenna R135 , removing and installing
- Access/Start Authorization Antenna (in rear bumper) R136
- Luggage Compartment Access/Start Authorization Antenna R137 , removing and installing
- Interior Access/Start Authorization Antenna 1 R138 , removing and installing
- Interior Access/Start Authorization Antenna 2 R139 , removing and installing
- Interior Access/Start Authorization Antenna 3 R154 , removing and installing
- Antenna for Access/Start Authorization, checking
- Notes
- Checking Drivers Access/Start Authorization Antenna R134
- Checking Front Passengers Access/Start Authorization Antenna R135
- Checking Access/Start Authorization Antenna (in rear bumper) R136
- Checking Luggage Compartment Access/Start Authorization Antenna R137
- Checking Interior Access/Start Authorization Antenna 1 R138
- Checking Interior Access/Start Authorization Antenna 2 R139
- Checking Interior Access/Start Authorization Antenna 3 R154
- Antenna for Access/Start Authorization, tightening torques
- Parking aid
- Parking aid
- General information
- Parking assistance system - assembly overview
- Parking Aid Control Module J446 , removing and installing
- Front parking aid sensor, removing and installing
- Rear parking aid sensor, removing and installing
- Front parking aid display, removing and installing
- Rear parking aid display, removing
- Front side marker lamp, removing and installing
- Front windshield wiper system
- 96 - Lights, Switches - Interior, Anti-theft
- Interior lights and switches
- Lights and switches in the instrument panel
- Lights and switches in the instrument panel
- Light Switch E1 , removing and installing
- Instrument panel light dimmer switch E20 and trip odometer reset switch E123 , removing and installing
- Rear window shade switch E149 and parking aid button E266 , removing and installing
- Glove Compartment Light W6 , removing and installing
- Glove Compartment Lamp Switch E26 , removing and installing
- Steering Column Adjustment Switch E167 , removing and installing
- Footwell lights , removing and installing
- Front Doors - Lights and Switches
- Front Doors - Lights and Switches
- Central switch for window regulator, in drivers door E189 , switch for rear lid remote control lock E233 , and fuel tank lid unlock button E319 , removing and installing
- Right front window switch E41 , removing and installing
- Front Interior Locking Button E308 and E309 , removing and installing
- Front Door Opener Illumination L108 and L109 , removing and installing
- Front door contact switch, removing and installing
- Front Entry Light W31 and W32 , removing and installing
- Door Warning Light W30 and W36 , removing and installing
- Rear Doors - Lights and Switches
- Rear Doors - Lights and Switches
- Rear Window Switch E52 and E54 , removing and installing
- Rear Interior Locking Button E310 and E311 , removing and installing
- Rear Door Opener Illumination L110 and L111 , removing and installing
- Rear door contact switch, removing and installing
- Rear Entry Light W33 and W34 , removing and installing
- Rear Door Warning Light W37 and W38 , removing and installing
- Luggage Compartment - Lights and Switches
- Headliner - Lights and Switches
- Headliner - Lights and Switches
- Front interior light W1 , removing and installing
- Map/Reading Light W19 and W13 , removing and installing
- Sunroof Switch E8 , removing and installing
- Rear interior and reading lights, removing and installing
- Rear Interior Lamp Button E327 and E329 , removing and installing
- Removing and installing garage door opener
- Switch panel in roof module, removing and installing
- Center Console - Lights and Switches
- Center Console - Lights and Switches
- Mirror adjustment switch E43 with mirror selector switch E48 , removing and installing
- Access/start authorization button E408 , removing and installing
- Switch panel for front seat heating/ventilation with buttons for dampening, ESP, and level control in the center console, removing and installing
- Switch panel for rear seat position and heating/ventilation memory (4-seater), removing and installing
- Switch panel for rear seat adjustment (4-seater), removing and installing
- Switch panel for rear seat lumbar adjustment (5-seater), removing and installing
- Other electrical components
- 97 - Wiring
- Vehicle Diagnostic, Testing and Information Systems
- Fuse holder, relay panel, E-boxes and control modules, removing and installing
- Fuse holder, relay panel, E-boxes and control modules, removing and installing
- Fuse holder under the instrument panel, left, removing and installing
- Auxiliary fuse box in luggage compartment, left, removing and installing
- Thermal fuse box on driver side, removing and installing
- E-box in luggage compartment, left, removing and installing
- E-box in plenum chamber, right, removing and installing
- Relay carrier in right front footwell, removing and installing
- Vehicle electrical system control module, replacing
- Vehicle electrical system control module, removing and installing
- Roof electronics control module, removing and installing
- Wiring Harnesses and Connectors, Repairing
- 27 - Battery, Starter, Generator, Cruise control
- OEM Connector End Views
- Connector End Views
- Engine Control Module (ECM) Connector Side Connector End View (J623)
- Engine Control Module (ECM) 2 Connector Side Connector End View (J624)
- Tire Pressure Monitoring Control Module Connector Side Connector End View (J502)
- Battery Monitoring Control Module Connector Side Connector End View (J367)
- Control Module For Distance Regulation Connector Side Connector End View (J428)
- Access/Start Control Module Connector Side Connector End View (J518)
- Digital Sound System Control Module Connector Side Connector End View (J525)
- Memory Seat Control Module Connector End Views (J136, T26s*)
- Connector End Views
- Electrical Equipment
- Charging Systems
- Electrical Equipment
- 27 - Battery, Starter, Generator, Cruise control
- Battery
- Battery, checking
- Battery, charging
- Battery, disconnecting and reconnecting
- Battery, disconnecting and reconnecting
- Battery (vehicles with two-battery concept), disconnecting and connecting
- Notes
- Battery disconnecting and reconnecting sequence
- Disconnecting battery in luggage compartment, right
- Disconnecting second battery in luggage compartment, left
- Batteries, reconnecting sequence
- Connecting second battery in luggage compartment, left
- Connecting battery in luggage compartment, right
- Work steps required after reconnecting battery
- Battery - vehicles with electric closing assist, disconnecting and connecting
- Battery, removing and installing
- Battery cut-out relay J7 , removing and installing
- Battery cut-off
- Battery monitoring control module J367 , removing and installing
- Tightening Torques: Battery
- Starter
- Tightening Torques: Starter
- Generator, removing and installing
- Generator, removing and installing
- Generator features
- Ribbed belt, checking
- Generator (8-cyl. Gasoline engine), assembly overview
- Generator (8-cyl. gasoline engine), removing and installing
- Generator, 12-cyl. Gasoline engine
- Generator (12-cyl. gasoline engine), removing and installing
- Generator ribbed belt pulley, removing and installing
- Tightening Torques: Generator
- Adaptive Cruise Control (ACC)
- Cruise control system (CCS), removing and installing
- 90 - Instruments
- Instrument cluster
- Service interval indicator
- 92 - Windshield wiper and washer system
- Front windshield wiper system
- Front windshield wiper system
- General information
- Front windshield wiper system, removing and installing
- Notes
- Front windshield wiper system, removing
- Wiper arms, removing
- Plenum chamber cover, removing
- Cowl, removing
- Drivers side wiper frame, installing
- Left wiper frame, removing
- Removing wiper motor from left wiper frame
- Installing wiper motor into left wiper frame
- Right wiper frame, removing
- Removing wiper motor from wiper frame
- Installing wiper motor into right wiper frame
- Rest position of windshield wiper blades, adjusting
- Aero wipers, removing and installing
- Rain sensor G213 , removing and installing
- Windshield washer system
- Windshield washer system
- Front windshield washer system - assembly overview
- Washer fluid reservoir, removing and installing
- Windshield Washer Pump V5 , removing and installing
- Windshield Washer Fluid Level Sensor G33 , removing and installing
- Washer nozzles for front windshield washer system, removing and installing
- Spray jets for front windshield washer system, checking
- Headlamp cleaning system
- Washer Hose Couplings
- Washer hoses, repairing
- Tightening Torques: Windshield wiper and washer system
- 94 - Lights, Switches - Exterior
- Headlight with one gas-discharge bulb
- Headlight with one gas-discharge bulb
- Main headlamp with one gas-discharge bulb, assembly overview
- Main headlamp, removing and installing
- Correcting installation position of headlamp
- Bulbs for main headlamps with one gas discharge bulb, replacing
- Automatic headlamp range control adjusting motor, removing and installing
- Removing and installing Headlamp Range Control Module
- Level control system sensor, removing and installing
- Headlight range control module, coding
- Main headlamp, adjusting
- Main headlamp with two gas-discharge bulbs
- Main headlamp with two gas-discharge bulbs
- Main headlamp with two gas-discharge bulbs, assembly overview
- Main headlamp, removing and installing
- Correcting installation position of headlamp
- Bulbs for main headlamps with two gas discharge bulbs, replacing
- Automatic headlamp range control adjusting motor, removing and installing
- Removing and installing Headlamp Range Control Module
- HID lamp high beam control module, removing and installing
- Level control system sensor, removing and installing
- Headlight range control module, coding
- Main headlamp, adjusting
- Fog lamps
- Mirror turn signals and entry lights in exterior mirror
- Taillamps
- Taillamps
- Taillamp assembly in side panel - assembly overview
- Taillight in rear lid, assembly overview
- Taillamp assembly in side panel, removing and installing
- Tail light assembly in luggage compartment lid, removing and installing
- Back-up light, removing and installing
- Gap dimensions of taillamp assemblies
- Rear light function, checking
- License Plate Lights
- High-Mount Brake Light
- Steering column switch
- Access/start authorization
- Access/start authorization
- Emergency release
- Access/Start Authorization Switch E415
- Access/Start Authorization Button E408
- Access/Start Control Module J518
- Access/start authorization antennas, assembly overview
- Access/start authorization antennas, removing and installing
- Notes
- Drivers Access/Start Authorization Antenna R134 , removing and installing
- Front Passengers Access/Start Authorization Antenna R135 , removing and installing
- Access/Start Authorization Antenna (in rear bumper) R136
- Luggage Compartment Access/Start Authorization Antenna R137 , removing and installing
- Interior Access/Start Authorization Antenna 1 R138 , removing and installing
- Interior Access/Start Authorization Antenna 2 R139 , removing and installing
- Interior Access/Start Authorization Antenna 3 R154 , removing and installing
- Antenna for Access/Start Authorization, checking
- Notes
- Checking Drivers Access/Start Authorization Antenna R134
- Checking Front Passengers Access/Start Authorization Antenna R135
- Checking Access/Start Authorization Antenna (in rear bumper) R136
- Checking Luggage Compartment Access/Start Authorization Antenna R137
- Checking Interior Access/Start Authorization Antenna 1 R138
- Checking Interior Access/Start Authorization Antenna 2 R139
- Checking Interior Access/Start Authorization Antenna 3 R154
- Antenna for Access/Start Authorization, tightening torques
- Parking aid
- Parking aid
- General information
- Parking assistance system - assembly overview
- Parking Aid Control Module J446 , removing and installing
- Front parking aid sensor, removing and installing
- Rear parking aid sensor, removing and installing
- Front parking aid display, removing and installing
- Rear parking aid display, removing
- Front side marker lamp, removing and installing
- Front windshield wiper system
- 96 - Lights, Switches - Interior, Anti-theft
- Interior lights and switches
- Lights and switches in the instrument panel
- Lights and switches in the instrument panel
- Light Switch E1 , removing and installing
- Instrument panel light dimmer switch E20 and trip odometer reset switch E123 , removing and installing
- Rear window shade switch E149 and parking aid button E266 , removing and installing
- Glove Compartment Light W6 , removing and installing
- Glove Compartment Lamp Switch E26 , removing and installing
- Steering Column Adjustment Switch E167 , removing and installing
- Footwell lights , removing and installing
- Front Doors - Lights and Switches
- Front Doors - Lights and Switches
- Central switch for window regulator, in drivers door E189 , switch for rear lid remote control lock E233 , and fuel tank lid unlock button E319 , removing and installing
- Right front window switch E41 , removing and installing
- Front Interior Locking Button E308 and E309 , removing and installing
- Front Door Opener Illumination L108 and L109 , removing and installing
- Front door contact switch, removing and installing
- Front Entry Light W31 and W32 , removing and installing
- Door Warning Light W30 and W36 , removing and installing
- Rear Doors - Lights and Switches
- Rear Doors - Lights and Switches
- Rear Window Switch E52 and E54 , removing and installing
- Rear Interior Locking Button E310 and E311 , removing and installing
- Rear Door Opener Illumination L110 and L111 , removing and installing
- Rear door contact switch, removing and installing
- Rear Entry Light W33 and W34 , removing and installing
- Rear Door Warning Light W37 and W38 , removing and installing
- Luggage Compartment - Lights and Switches
- Headliner - Lights and Switches
- Headliner - Lights and Switches
- Front interior light W1 , removing and installing
- Map/Reading Light W19 and W13 , removing and installing
- Sunroof Switch E8 , removing and installing
- Rear interior and reading lights, removing and installing
- Rear Interior Lamp Button E327 and E329 , removing and installing
- Removing and installing garage door opener
- Switch panel in roof module, removing and installing
- Center Console - Lights and Switches
- Center Console - Lights and Switches
- Mirror adjustment switch E43 with mirror selector switch E48 , removing and installing
- Access/start authorization button E408 , removing and installing
- Switch panel for front seat heating/ventilation with buttons for dampening, ESP, and level control in the center console, removing and installing
- Switch panel for rear seat position and heating/ventilation memory (4-seater), removing and installing
- Switch panel for rear seat adjustment (4-seater), removing and installing
- Switch panel for rear seat lumbar adjustment (5-seater), removing and installing
- Other electrical components
- 97 - Wiring
- Vehicle Diagnostic, Testing and Information Systems
- Fuse holder, relay panel, E-boxes and control modules, removing and installing
- Fuse holder, relay panel, E-boxes and control modules, removing and installing
- Fuse holder under the instrument panel, left, removing and installing
- Auxiliary fuse box in luggage compartment, left, removing and installing
- Thermal fuse box on driver side, removing and installing
- E-box in luggage compartment, left, removing and installing
- E-box in plenum chamber, right, removing and installing
- Relay carrier in right front footwell, removing and installing
- Vehicle electrical system control module, replacing
- Vehicle electrical system control module, removing and installing
- Roof electronics control module, removing and installing
- Wiring Harnesses and Connectors, Repairing
- 27 - Battery, Starter, Generator, Cruise control
- Electrical Equipment
- Component Locations
- Fuses & Circuit Breakers
- Electrical Equipment
- 27 - Battery, Starter, Generator, Cruise control
- Battery
- Battery, checking
- Battery, charging
- Battery, disconnecting and reconnecting
- Battery, disconnecting and reconnecting
- Battery (vehicles with two-battery concept), disconnecting and connecting
- Notes
- Battery disconnecting and reconnecting sequence
- Disconnecting battery in luggage compartment, right
- Disconnecting second battery in luggage compartment, left
- Batteries, reconnecting sequence
- Connecting second battery in luggage compartment, left
- Connecting battery in luggage compartment, right
- Work steps required after reconnecting battery
- Battery - vehicles with electric closing assist, disconnecting and connecting
- Battery, removing and installing
- Battery cut-out relay J7 , removing and installing
- Battery cut-off
- Battery monitoring control module J367 , removing and installing
- Tightening Torques: Battery
- Starter
- Tightening Torques: Starter
- Generator, removing and installing
- Generator, removing and installing
- Generator features
- Ribbed belt, checking
- Generator (8-cyl. Gasoline engine), assembly overview
- Generator (8-cyl. gasoline engine), removing and installing
- Generator, 12-cyl. Gasoline engine
- Generator (12-cyl. gasoline engine), removing and installing
- Generator ribbed belt pulley, removing and installing
- Tightening Torques: Generator
- Adaptive Cruise Control (ACC)
- Cruise control system (CCS), removing and installing
- 90 - Instruments
- Instrument cluster
- Service interval indicator
- 92 - Windshield wiper and washer system
- Front windshield wiper system
- Front windshield wiper system
- General information
- Front windshield wiper system, removing and installing
- Notes
- Front windshield wiper system, removing
- Wiper arms, removing
- Plenum chamber cover, removing
- Cowl, removing
- Drivers side wiper frame, installing
- Left wiper frame, removing
- Removing wiper motor from left wiper frame
- Installing wiper motor into left wiper frame
- Right wiper frame, removing
- Removing wiper motor from wiper frame
- Installing wiper motor into right wiper frame
- Rest position of windshield wiper blades, adjusting
- Aero wipers, removing and installing
- Rain sensor G213 , removing and installing
- Windshield washer system
- Windshield washer system
- Front windshield washer system - assembly overview
- Washer fluid reservoir, removing and installing
- Windshield Washer Pump V5 , removing and installing
- Windshield Washer Fluid Level Sensor G33 , removing and installing
- Washer nozzles for front windshield washer system, removing and installing
- Spray jets for front windshield washer system, checking
- Headlamp cleaning system
- Washer Hose Couplings
- Washer hoses, repairing
- Tightening Torques: Windshield wiper and washer system
- 94 - Lights, Switches - Exterior
- Headlight with one gas-discharge bulb
- Headlight with one gas-discharge bulb
- Main headlamp with one gas-discharge bulb, assembly overview
- Main headlamp, removing and installing
- Correcting installation position of headlamp
- Bulbs for main headlamps with one gas discharge bulb, replacing
- Automatic headlamp range control adjusting motor, removing and installing
- Removing and installing Headlamp Range Control Module
- Level control system sensor, removing and installing
- Headlight range control module, coding
- Main headlamp, adjusting
- Main headlamp with two gas-discharge bulbs
- Main headlamp with two gas-discharge bulbs
- Main headlamp with two gas-discharge bulbs, assembly overview
- Main headlamp, removing and installing
- Correcting installation position of headlamp
- Bulbs for main headlamps with two gas discharge bulbs, replacing
- Automatic headlamp range control adjusting motor, removing and installing
- Removing and installing Headlamp Range Control Module
- HID lamp high beam control module, removing and installing
- Level control system sensor, removing and installing
- Headlight range control module, coding
- Main headlamp, adjusting
- Fog lamps
- Mirror turn signals and entry lights in exterior mirror
- Taillamps
- Taillamps
- Taillamp assembly in side panel - assembly overview
- Taillight in rear lid, assembly overview
- Taillamp assembly in side panel, removing and installing
- Tail light assembly in luggage compartment lid, removing and installing
- Back-up light, removing and installing
- Gap dimensions of taillamp assemblies
- Rear light function, checking
- License Plate Lights
- High-Mount Brake Light
- Steering column switch
- Access/start authorization
- Access/start authorization
- Emergency release
- Access/Start Authorization Switch E415
- Access/Start Authorization Button E408
- Access/Start Control Module J518
- Access/start authorization antennas, assembly overview
- Access/start authorization antennas, removing and installing
- Notes
- Drivers Access/Start Authorization Antenna R134 , removing and installing
- Front Passengers Access/Start Authorization Antenna R135 , removing and installing
- Access/Start Authorization Antenna (in rear bumper) R136
- Luggage Compartment Access/Start Authorization Antenna R137 , removing and installing
- Interior Access/Start Authorization Antenna 1 R138 , removing and installing
- Interior Access/Start Authorization Antenna 2 R139 , removing and installing
- Interior Access/Start Authorization Antenna 3 R154 , removing and installing
- Antenna for Access/Start Authorization, checking
- Notes
- Checking Drivers Access/Start Authorization Antenna R134
- Checking Front Passengers Access/Start Authorization Antenna R135
- Checking Access/Start Authorization Antenna (in rear bumper) R136
- Checking Luggage Compartment Access/Start Authorization Antenna R137
- Checking Interior Access/Start Authorization Antenna 1 R138
- Checking Interior Access/Start Authorization Antenna 2 R139
- Checking Interior Access/Start Authorization Antenna 3 R154
- Antenna for Access/Start Authorization, tightening torques
- Parking aid
- Parking aid
- General information
- Parking assistance system - assembly overview
- Parking Aid Control Module J446 , removing and installing
- Front parking aid sensor, removing and installing
- Rear parking aid sensor, removing and installing
- Front parking aid display, removing and installing
- Rear parking aid display, removing
- Front side marker lamp, removing and installing
- Front windshield wiper system
- 96 - Lights, Switches - Interior, Anti-theft
- Interior lights and switches
- Lights and switches in the instrument panel
- Lights and switches in the instrument panel
- Light Switch E1 , removing and installing
- Instrument panel light dimmer switch E20 and trip odometer reset switch E123 , removing and installing
- Rear window shade switch E149 and parking aid button E266 , removing and installing
- Glove Compartment Light W6 , removing and installing
- Glove Compartment Lamp Switch E26 , removing and installing
- Steering Column Adjustment Switch E167 , removing and installing
- Footwell lights , removing and installing
- Front Doors - Lights and Switches
- Front Doors - Lights and Switches
- Central switch for window regulator, in drivers door E189 , switch for rear lid remote control lock E233 , and fuel tank lid unlock button E319 , removing and installing
- Right front window switch E41 , removing and installing
- Front Interior Locking Button E308 and E309 , removing and installing
- Front Door Opener Illumination L108 and L109 , removing and installing
- Front door contact switch, removing and installing
- Front Entry Light W31 and W32 , removing and installing
- Door Warning Light W30 and W36 , removing and installing
- Rear Doors - Lights and Switches
- Rear Doors - Lights and Switches
- Rear Window Switch E52 and E54 , removing and installing
- Rear Interior Locking Button E310 and E311 , removing and installing
- Rear Door Opener Illumination L110 and L111 , removing and installing
- Rear door contact switch, removing and installing
- Rear Entry Light W33 and W34 , removing and installing
- Rear Door Warning Light W37 and W38 , removing and installing
- Luggage Compartment - Lights and Switches
- Headliner - Lights and Switches
- Headliner - Lights and Switches
- Front interior light W1 , removing and installing
- Map/Reading Light W19 and W13 , removing and installing
- Sunroof Switch E8 , removing and installing
- Rear interior and reading lights, removing and installing
- Rear Interior Lamp Button E327 and E329 , removing and installing
- Removing and installing garage door opener
- Switch panel in roof module, removing and installing
- Center Console - Lights and Switches
- Center Console - Lights and Switches
- Mirror adjustment switch E43 with mirror selector switch E48 , removing and installing
- Access/start authorization button E408 , removing and installing
- Switch panel for front seat heating/ventilation with buttons for dampening, ESP, and level control in the center console, removing and installing
- Switch panel for rear seat position and heating/ventilation memory (4-seater), removing and installing
- Switch panel for rear seat adjustment (4-seater), removing and installing
- Switch panel for rear seat lumbar adjustment (5-seater), removing and installing
- Other electrical components
- 97 - Wiring
- Vehicle Diagnostic, Testing and Information Systems
- Fuse holder, relay panel, E-boxes and control modules, removing and installing
- Fuse holder, relay panel, E-boxes and control modules, removing and installing
- Fuse holder under the instrument panel, left, removing and installing
- Auxiliary fuse box in luggage compartment, left, removing and installing
- Thermal fuse box on driver side, removing and installing
- E-box in luggage compartment, left, removing and installing
- E-box in plenum chamber, right, removing and installing
- Relay carrier in right front footwell, removing and installing
- Vehicle electrical system control module, replacing
- Vehicle electrical system control module, removing and installing
- Roof electronics control module, removing and installing
- Wiring Harnesses and Connectors, Repairing
- 27 - Battery, Starter, Generator, Cruise control
- Fuses & Circuit Breakers
- Electrical Equipment
- Gauges
- Body Interior
- 68 - Interior equipment
- Rearview mirror
- Storage compartments, covers and trim
- Tools
- Center console (4-seater), removing and installing
- Center console (5-seater), removing and installing
- Front ashtray unit, removing and installing
- Storage compartment (front) in center console (4-seater), removing and installing
- Storage compartment (rear) in center console (4-seater), removing and installing
- Cup holder, removing and installing
- Footwell cover (passenger side), removing and installing
- Glove compartment, removing and installing
- Footwell cover (driver side), removing and installing
- Fuse panel cover (driver side), removing and installing
- Instrument panel side covers, removing and installing
- Sun visor, removing and installing
- Grab handles
- 69 - Passenger protection - Airbags, Seat belts
- Seat belts
- Tools
- Safety precautions for belt tensioners
- Disposing of belt tensioner units
- Front seat belt with two belt retractors, removing and installing
- Front seat belt, removing and installing
- Belt height adjuster (electrical), removing and installing
- Belt height adjuster (mechanical), removing and installing
- Front seat belt latch, removing and installing
- Multi-part locking tongue, detaching
- Shoulder and lap belt, connecting
- Rear seat belts (4-seater), removing and installing
- Rear outer seat belts (5-seater), removing and installing
- Rear middle seat belt (5-seater), removing and installing
- Rear belt latch (4-seater), removing and installing
- Rear belt latches (5-seater), removing and installing
- Seat belts, inspecting
- Inspecting child seat anchors (LATCH system Lower Anchors and Tethers for CHildren), after accident
- Airbag
- Location overview: Airbag components
- Safety precautions for work on airbags
- Disposal of airbag units
- Airbag units, deploying prior to disposal
- Airbag units, replacing after an accident
- Airbag control module -J234-, removing and installing
- Driver airbag unit, removing and installing
- Driver airbag unit mounting plate, removing and installing
- Steering wheel, removing and installing
- Passengers side airbag unit, removing and installing
- Side airbags for driver and front passenger, removing and installing
- Driver and passenger side head curtain airbags, removing and installing
- Rear side airbag, removing and installing
- Passenger Occupant Detection System (PODS) (USA only), removing and installing
- Components, adapting
- Crash sensors
- Seat belts
- 70 - Interior trim
- Instrument panel, removing and installing
- Door trim
- Sun shades
- Pillar trim
- Upper A-pillar trim, removing and installing
- Passenger side lower A-pillar trim, removing and installing
- Driver side lower A-pillar trim, removing and installing
- Upper B-pillar trim, removing and installing
- Lower B-pillar trim, removing and installing
- Upper C-pillar trim, removing and installing
- Lower C-pillar trim, removing and installing
- Wheel house trim, removing and installing
- Rear shelf
- Luggage compartment trim
- Roof trim
- 72 - Seat - Frames
- Front seats
- Tools
- Front seat, removing and installing
- Seat trim, removing and installing
- Seat switch assembly, removing and installing
- Seat control module, removing and installing
- Seat longitudinal adjuster, removing and installing
- Drive motor for seat longitudinal adjuster, removing and installing
- Seat inclination adjuster, removing and installing
- Seat height adjuster, removing and installing
- Seat backrest, removing and installing
- Lumbar support, removing and installing
- Seat backrest panel, 18/16-position seat, removing and installing
- Seat backrest panel, 12-way seat, removing and installing
- Seat headrest, removing and installing
- Rear seats
- Tools
- Rear seat cushions, 10-position seat, removing and installing
- Rear seat backrest, 10-position seat, removing and installing
- Seat frame, 10-position seat, removing and installing
- Control module, 10-position seat, removing and installing
- Headrest, 10-position seat, removing and installing
- Rear seat cushion, 5-seater, removing and installing
- Rear seat backrest, 5-seater, removing and installing
- Front seats
- 74 - Seats - Upholstery, Covers
- Front seat covers and upholstery
- Rear seat covers and upholstery
- Tools
- Rear seat cushion cover and padding, 10-position seat, removing and installing
- Rear seat backrest cover and padding, 10-position seat, removing and installing
- Center armrest, 4-seater, removing and installing
- Rear seat cushion cover and padding, 5-seater, removing and installing
- Rear seat backrest cover and padding, 5-seater, removing and installing
- Center armrest, 5-seater, removing and installing
- Cupholder in center armrest, 5-seater, removing and installing
- Center headrest, 5-seater, removing and installing
- Rear seat heating elements, replacing
- 76 - Gas, water, electricity
- 68 - Interior equipment
- Electrical Equipment
- 27 - Battery, Starter, Generator, Cruise control
- Battery
- Battery, checking
- Battery, charging
- Battery, disconnecting and reconnecting
- Battery, disconnecting and reconnecting
- Battery (vehicles with two-battery concept), disconnecting and connecting
- Notes
- Battery disconnecting and reconnecting sequence
- Disconnecting battery in luggage compartment, right
- Disconnecting second battery in luggage compartment, left
- Batteries, reconnecting sequence
- Connecting second battery in luggage compartment, left
- Connecting battery in luggage compartment, right
- Work steps required after reconnecting battery
- Battery - vehicles with electric closing assist, disconnecting and connecting
- Battery, removing and installing
- Battery cut-out relay J7 , removing and installing
- Battery cut-off
- Battery monitoring control module J367 , removing and installing
- Tightening Torques: Battery
- Starter
- Tightening Torques: Starter
- Generator, removing and installing
- Generator, removing and installing
- Generator features
- Ribbed belt, checking
- Generator (8-cyl. Gasoline engine), assembly overview
- Generator (8-cyl. gasoline engine), removing and installing
- Generator, 12-cyl. Gasoline engine
- Generator (12-cyl. gasoline engine), removing and installing
- Generator ribbed belt pulley, removing and installing
- Tightening Torques: Generator
- Adaptive Cruise Control (ACC)
- Cruise control system (CCS), removing and installing
- 90 - Instruments
- Instrument cluster
- Service interval indicator
- 92 - Windshield wiper and washer system
- Front windshield wiper system
- Front windshield wiper system
- General information
- Front windshield wiper system, removing and installing
- Notes
- Front windshield wiper system, removing
- Wiper arms, removing
- Plenum chamber cover, removing
- Cowl, removing
- Drivers side wiper frame, installing
- Left wiper frame, removing
- Removing wiper motor from left wiper frame
- Installing wiper motor into left wiper frame
- Right wiper frame, removing
- Removing wiper motor from wiper frame
- Installing wiper motor into right wiper frame
- Rest position of windshield wiper blades, adjusting
- Aero wipers, removing and installing
- Rain sensor G213 , removing and installing
- Windshield washer system
- Windshield washer system
- Front windshield washer system - assembly overview
- Washer fluid reservoir, removing and installing
- Windshield Washer Pump V5 , removing and installing
- Windshield Washer Fluid Level Sensor G33 , removing and installing
- Washer nozzles for front windshield washer system, removing and installing
- Spray jets for front windshield washer system, checking
- Headlamp cleaning system
- Washer Hose Couplings
- Washer hoses, repairing
- Tightening Torques: Windshield wiper and washer system
- 94 - Lights, Switches - Exterior
- Headlight with one gas-discharge bulb
- Headlight with one gas-discharge bulb
- Main headlamp with one gas-discharge bulb, assembly overview
- Main headlamp, removing and installing
- Correcting installation position of headlamp
- Bulbs for main headlamps with one gas discharge bulb, replacing
- Automatic headlamp range control adjusting motor, removing and installing
- Removing and installing Headlamp Range Control Module
- Level control system sensor, removing and installing
- Headlight range control module, coding
- Main headlamp, adjusting
- Main headlamp with two gas-discharge bulbs
- Main headlamp with two gas-discharge bulbs
- Main headlamp with two gas-discharge bulbs, assembly overview
- Main headlamp, removing and installing
- Correcting installation position of headlamp
- Bulbs for main headlamps with two gas discharge bulbs, replacing
- Automatic headlamp range control adjusting motor, removing and installing
- Removing and installing Headlamp Range Control Module
- HID lamp high beam control module, removing and installing
- Level control system sensor, removing and installing
- Headlight range control module, coding
- Main headlamp, adjusting
- Fog lamps
- Mirror turn signals and entry lights in exterior mirror
- Taillamps
- Taillamps
- Taillamp assembly in side panel - assembly overview
- Taillight in rear lid, assembly overview
- Taillamp assembly in side panel, removing and installing
- Tail light assembly in luggage compartment lid, removing and installing
- Back-up light, removing and installing
- Gap dimensions of taillamp assemblies
- Rear light function, checking
- License Plate Lights
- High-Mount Brake Light
- Steering column switch
- Access/start authorization
- Access/start authorization
- Emergency release
- Access/Start Authorization Switch E415
- Access/Start Authorization Button E408
- Access/Start Control Module J518
- Access/start authorization antennas, assembly overview
- Access/start authorization antennas, removing and installing
- Notes
- Drivers Access/Start Authorization Antenna R134 , removing and installing
- Front Passengers Access/Start Authorization Antenna R135 , removing and installing
- Access/Start Authorization Antenna (in rear bumper) R136
- Luggage Compartment Access/Start Authorization Antenna R137 , removing and installing
- Interior Access/Start Authorization Antenna 1 R138 , removing and installing
- Interior Access/Start Authorization Antenna 2 R139 , removing and installing
- Interior Access/Start Authorization Antenna 3 R154 , removing and installing
- Antenna for Access/Start Authorization, checking
- Notes
- Checking Drivers Access/Start Authorization Antenna R134
- Checking Front Passengers Access/Start Authorization Antenna R135
- Checking Access/Start Authorization Antenna (in rear bumper) R136
- Checking Luggage Compartment Access/Start Authorization Antenna R137
- Checking Interior Access/Start Authorization Antenna 1 R138
- Checking Interior Access/Start Authorization Antenna 2 R139
- Checking Interior Access/Start Authorization Antenna 3 R154
- Antenna for Access/Start Authorization, tightening torques
- Parking aid
- Parking aid
- General information
- Parking assistance system - assembly overview
- Parking Aid Control Module J446 , removing and installing
- Front parking aid sensor, removing and installing
- Rear parking aid sensor, removing and installing
- Front parking aid display, removing and installing
- Rear parking aid display, removing
- Front side marker lamp, removing and installing
- Front windshield wiper system
- 96 - Lights, Switches - Interior, Anti-theft
- Interior lights and switches
- Lights and switches in the instrument panel
- Lights and switches in the instrument panel
- Light Switch E1 , removing and installing
- Instrument panel light dimmer switch E20 and trip odometer reset switch E123 , removing and installing
- Rear window shade switch E149 and parking aid button E266 , removing and installing
- Glove Compartment Light W6 , removing and installing
- Glove Compartment Lamp Switch E26 , removing and installing
- Steering Column Adjustment Switch E167 , removing and installing
- Footwell lights , removing and installing
- Front Doors - Lights and Switches
- Front Doors - Lights and Switches
- Central switch for window regulator, in drivers door E189 , switch for rear lid remote control lock E233 , and fuel tank lid unlock button E319 , removing and installing
- Right front window switch E41 , removing and installing
- Front Interior Locking Button E308 and E309 , removing and installing
- Front Door Opener Illumination L108 and L109 , removing and installing
- Front door contact switch, removing and installing
- Front Entry Light W31 and W32 , removing and installing
- Door Warning Light W30 and W36 , removing and installing
- Rear Doors - Lights and Switches
- Rear Doors - Lights and Switches
- Rear Window Switch E52 and E54 , removing and installing
- Rear Interior Locking Button E310 and E311 , removing and installing
- Rear Door Opener Illumination L110 and L111 , removing and installing
- Rear door contact switch, removing and installing
- Rear Entry Light W33 and W34 , removing and installing
- Rear Door Warning Light W37 and W38 , removing and installing
- Luggage Compartment - Lights and Switches
- Headliner - Lights and Switches
- Headliner - Lights and Switches
- Front interior light W1 , removing and installing
- Map/Reading Light W19 and W13 , removing and installing
- Sunroof Switch E8 , removing and installing
- Rear interior and reading lights, removing and installing
- Rear Interior Lamp Button E327 and E329 , removing and installing
- Removing and installing garage door opener
- Switch panel in roof module, removing and installing
- Center Console - Lights and Switches
- Center Console - Lights and Switches
- Mirror adjustment switch E43 with mirror selector switch E48 , removing and installing
- Access/start authorization button E408 , removing and installing
- Switch panel for front seat heating/ventilation with buttons for dampening, ESP, and level control in the center console, removing and installing
- Switch panel for rear seat position and heating/ventilation memory (4-seater), removing and installing
- Switch panel for rear seat adjustment (4-seater), removing and installing
- Switch panel for rear seat lumbar adjustment (5-seater), removing and installing
- Other electrical components
- 97 - Wiring
- Vehicle Diagnostic, Testing and Information Systems
- Fuse holder, relay panel, E-boxes and control modules, removing and installing
- Fuse holder, relay panel, E-boxes and control modules, removing and installing
- Fuse holder under the instrument panel, left, removing and installing
- Auxiliary fuse box in luggage compartment, left, removing and installing
- Thermal fuse box on driver side, removing and installing
- E-box in luggage compartment, left, removing and installing
- E-box in plenum chamber, right, removing and installing
- Relay carrier in right front footwell, removing and installing
- Vehicle electrical system control module, replacing
- Vehicle electrical system control module, removing and installing
- Roof electronics control module, removing and installing
- Wiring Harnesses and Connectors, Repairing
- 27 - Battery, Starter, Generator, Cruise control
- Electrical Equipment - General Information
- 27 - Battery, Starter, Generator, Cruise Control
- 90 - Instruments
- 92 - Windshield Wiper and Washer system
- 94 - Lights, Switches - Exterior
- 96 - Lights, Switches - Interior, Anti-theft
- 97 - Wiring
- Vehicle Diagnostic, Testing and Information Systems
- Wiring Harnesses and Connectors, Repairing
- Connector Repair Set VAS 6410
- Body Interior
- Motors, Switches, Relays
- Electrical Equipment
- 27 - Battery, Starter, Generator, Cruise control
- Battery
- Battery, checking
- Battery, charging
- Battery, disconnecting and reconnecting
- Battery, disconnecting and reconnecting
- Battery (vehicles with two-battery concept), disconnecting and connecting
- Notes
- Battery disconnecting and reconnecting sequence
- Disconnecting battery in luggage compartment, right
- Disconnecting second battery in luggage compartment, left
- Batteries, reconnecting sequence
- Connecting second battery in luggage compartment, left
- Connecting battery in luggage compartment, right
- Work steps required after reconnecting battery
- Battery - vehicles with electric closing assist, disconnecting and connecting
- Battery, removing and installing
- Battery cut-out relay J7 , removing and installing
- Battery cut-off
- Battery monitoring control module J367 , removing and installing
- Tightening Torques: Battery
- Starter
- Tightening Torques: Starter
- Generator, removing and installing
- Generator, removing and installing
- Generator features
- Ribbed belt, checking
- Generator (8-cyl. Gasoline engine), assembly overview
- Generator (8-cyl. gasoline engine), removing and installing
- Generator, 12-cyl. Gasoline engine
- Generator (12-cyl. gasoline engine), removing and installing
- Generator ribbed belt pulley, removing and installing
- Tightening Torques: Generator
- Adaptive Cruise Control (ACC)
- Cruise control system (CCS), removing and installing
- 90 - Instruments
- Instrument cluster
- Service interval indicator
- 92 - Windshield wiper and washer system
- Front windshield wiper system
- Front windshield wiper system
- General information
- Front windshield wiper system, removing and installing
- Notes
- Front windshield wiper system, removing
- Wiper arms, removing
- Plenum chamber cover, removing
- Cowl, removing
- Drivers side wiper frame, installing
- Left wiper frame, removing
- Removing wiper motor from left wiper frame
- Installing wiper motor into left wiper frame
- Right wiper frame, removing
- Removing wiper motor from wiper frame
- Installing wiper motor into right wiper frame
- Rest position of windshield wiper blades, adjusting
- Aero wipers, removing and installing
- Rain sensor G213 , removing and installing
- Windshield washer system
- Windshield washer system
- Front windshield washer system - assembly overview
- Washer fluid reservoir, removing and installing
- Windshield Washer Pump V5 , removing and installing
- Windshield Washer Fluid Level Sensor G33 , removing and installing
- Washer nozzles for front windshield washer system, removing and installing
- Spray jets for front windshield washer system, checking
- Headlamp cleaning system
- Washer Hose Couplings
- Washer hoses, repairing
- Tightening Torques: Windshield wiper and washer system
- 94 - Lights, Switches - Exterior
- Headlight with one gas-discharge bulb
- Headlight with one gas-discharge bulb
- Main headlamp with one gas-discharge bulb, assembly overview
- Main headlamp, removing and installing
- Correcting installation position of headlamp
- Bulbs for main headlamps with one gas discharge bulb, replacing
- Automatic headlamp range control adjusting motor, removing and installing
- Removing and installing Headlamp Range Control Module
- Level control system sensor, removing and installing
- Headlight range control module, coding
- Main headlamp, adjusting
- Main headlamp with two gas-discharge bulbs
- Main headlamp with two gas-discharge bulbs
- Main headlamp with two gas-discharge bulbs, assembly overview
- Main headlamp, removing and installing
- Correcting installation position of headlamp
- Bulbs for main headlamps with two gas discharge bulbs, replacing
- Automatic headlamp range control adjusting motor, removing and installing
- Removing and installing Headlamp Range Control Module
- HID lamp high beam control module, removing and installing
- Level control system sensor, removing and installing
- Headlight range control module, coding
- Main headlamp, adjusting
- Fog lamps
- Mirror turn signals and entry lights in exterior mirror
- Taillamps
- Taillamps
- Taillamp assembly in side panel - assembly overview
- Taillight in rear lid, assembly overview
- Taillamp assembly in side panel, removing and installing
- Tail light assembly in luggage compartment lid, removing and installing
- Back-up light, removing and installing
- Gap dimensions of taillamp assemblies
- Rear light function, checking
- License Plate Lights
- High-Mount Brake Light
- Steering column switch
- Access/start authorization
- Access/start authorization
- Emergency release
- Access/Start Authorization Switch E415
- Access/Start Authorization Button E408
- Access/Start Control Module J518
- Access/start authorization antennas, assembly overview
- Access/start authorization antennas, removing and installing
- Notes
- Drivers Access/Start Authorization Antenna R134 , removing and installing
- Front Passengers Access/Start Authorization Antenna R135 , removing and installing
- Access/Start Authorization Antenna (in rear bumper) R136
- Luggage Compartment Access/Start Authorization Antenna R137 , removing and installing
- Interior Access/Start Authorization Antenna 1 R138 , removing and installing
- Interior Access/Start Authorization Antenna 2 R139 , removing and installing
- Interior Access/Start Authorization Antenna 3 R154 , removing and installing
- Antenna for Access/Start Authorization, checking
- Notes
- Checking Drivers Access/Start Authorization Antenna R134
- Checking Front Passengers Access/Start Authorization Antenna R135
- Checking Access/Start Authorization Antenna (in rear bumper) R136
- Checking Luggage Compartment Access/Start Authorization Antenna R137
- Checking Interior Access/Start Authorization Antenna 1 R138
- Checking Interior Access/Start Authorization Antenna 2 R139
- Checking Interior Access/Start Authorization Antenna 3 R154
- Antenna for Access/Start Authorization, tightening torques
- Parking aid
- Parking aid
- General information
- Parking assistance system - assembly overview
- Parking Aid Control Module J446 , removing and installing
- Front parking aid sensor, removing and installing
- Rear parking aid sensor, removing and installing
- Front parking aid display, removing and installing
- Rear parking aid display, removing
- Front side marker lamp, removing and installing
- Front windshield wiper system
- 96 - Lights, Switches - Interior, Anti-theft
- Interior lights and switches
- Lights and switches in the instrument panel
- Lights and switches in the instrument panel
- Light Switch E1 , removing and installing
- Instrument panel light dimmer switch E20 and trip odometer reset switch E123 , removing and installing
- Rear window shade switch E149 and parking aid button E266 , removing and installing
- Glove Compartment Light W6 , removing and installing
- Glove Compartment Lamp Switch E26 , removing and installing
- Steering Column Adjustment Switch E167 , removing and installing
- Footwell lights , removing and installing
- Front Doors - Lights and Switches
- Front Doors - Lights and Switches
- Central switch for window regulator, in drivers door E189 , switch for rear lid remote control lock E233 , and fuel tank lid unlock button E319 , removing and installing
- Right front window switch E41 , removing and installing
- Front Interior Locking Button E308 and E309 , removing and installing
- Front Door Opener Illumination L108 and L109 , removing and installing
- Front door contact switch, removing and installing
- Front Entry Light W31 and W32 , removing and installing
- Door Warning Light W30 and W36 , removing and installing
- Rear Doors - Lights and Switches
- Rear Doors - Lights and Switches
- Rear Window Switch E52 and E54 , removing and installing
- Rear Interior Locking Button E310 and E311 , removing and installing
- Rear Door Opener Illumination L110 and L111 , removing and installing
- Rear door contact switch, removing and installing
- Rear Entry Light W33 and W34 , removing and installing
- Rear Door Warning Light W37 and W38 , removing and installing
- Luggage Compartment - Lights and Switches
- Headliner - Lights and Switches
- Headliner - Lights and Switches
- Front interior light W1 , removing and installing
- Map/Reading Light W19 and W13 , removing and installing
- Sunroof Switch E8 , removing and installing
- Rear interior and reading lights, removing and installing
- Rear Interior Lamp Button E327 and E329 , removing and installing
- Removing and installing garage door opener
- Switch panel in roof module, removing and installing
- Center Console - Lights and Switches
- Center Console - Lights and Switches
- Mirror adjustment switch E43 with mirror selector switch E48 , removing and installing
- Access/start authorization button E408 , removing and installing
- Switch panel for front seat heating/ventilation with buttons for dampening, ESP, and level control in the center console, removing and installing
- Switch panel for rear seat position and heating/ventilation memory (4-seater), removing and installing
- Switch panel for rear seat adjustment (4-seater), removing and installing
- Switch panel for rear seat lumbar adjustment (5-seater), removing and installing
- Other electrical components
- 97 - Wiring
- Vehicle Diagnostic, Testing and Information Systems
- Fuse holder, relay panel, E-boxes and control modules, removing and installing
- Fuse holder, relay panel, E-boxes and control modules, removing and installing
- Fuse holder under the instrument panel, left, removing and installing
- Auxiliary fuse box in luggage compartment, left, removing and installing
- Thermal fuse box on driver side, removing and installing
- E-box in luggage compartment, left, removing and installing
- E-box in plenum chamber, right, removing and installing
- Relay carrier in right front footwell, removing and installing
- Vehicle electrical system control module, replacing
- Vehicle electrical system control module, removing and installing
- Roof electronics control module, removing and installing
- Wiring Harnesses and Connectors, Repairing
- 27 - Battery, Starter, Generator, Cruise control
- OEM Connector End Views
- Connector End Views
- Engine Control Module (ECM) Connector Side Connector End View (J623)
- Engine Control Module (ECM) 2 Connector Side Connector End View (J624)
- Tire Pressure Monitoring Control Module Connector Side Connector End View (J502)
- Battery Monitoring Control Module Connector Side Connector End View (J367)
- Control Module For Distance Regulation Connector Side Connector End View (J428)
- Access/Start Control Module Connector Side Connector End View (J518)
- Digital Sound System Control Module Connector Side Connector End View (J525)
- Memory Seat Control Module Connector End Views (J136, T26s*)
- Connector End Views
- Electrical Equipment
- Starter
- Electrical Equipment
- 27 - Battery, Starter, Generator, Cruise control
- Battery
- Battery, checking
- Battery, charging
- Battery, disconnecting and reconnecting
- Battery, disconnecting and reconnecting
- Battery (vehicles with two-battery concept), disconnecting and connecting
- Notes
- Battery disconnecting and reconnecting sequence
- Disconnecting battery in luggage compartment, right
- Disconnecting second battery in luggage compartment, left
- Batteries, reconnecting sequence
- Connecting second battery in luggage compartment, left
- Connecting battery in luggage compartment, right
- Work steps required after reconnecting battery
- Battery - vehicles with electric closing assist, disconnecting and connecting
- Battery, removing and installing
- Battery cut-out relay J7 , removing and installing
- Battery cut-off
- Battery monitoring control module J367 , removing and installing
- Tightening Torques: Battery
- Starter
- Tightening Torques: Starter
- Generator, removing and installing
- Generator, removing and installing
- Generator features
- Ribbed belt, checking
- Generator (8-cyl. Gasoline engine), assembly overview
- Generator (8-cyl. gasoline engine), removing and installing
- Generator, 12-cyl. Gasoline engine
- Generator (12-cyl. gasoline engine), removing and installing
- Generator ribbed belt pulley, removing and installing
- Tightening Torques: Generator
- Adaptive Cruise Control (ACC)
- Cruise control system (CCS), removing and installing
- 90 - Instruments
- Instrument cluster
- Service interval indicator
- 92 - Windshield wiper and washer system
- Front windshield wiper system
- Front windshield wiper system
- General information
- Front windshield wiper system, removing and installing
- Notes
- Front windshield wiper system, removing
- Wiper arms, removing
- Plenum chamber cover, removing
- Cowl, removing
- Drivers side wiper frame, installing
- Left wiper frame, removing
- Removing wiper motor from left wiper frame
- Installing wiper motor into left wiper frame
- Right wiper frame, removing
- Removing wiper motor from wiper frame
- Installing wiper motor into right wiper frame
- Rest position of windshield wiper blades, adjusting
- Aero wipers, removing and installing
- Rain sensor G213 , removing and installing
- Windshield washer system
- Windshield washer system
- Front windshield washer system - assembly overview
- Washer fluid reservoir, removing and installing
- Windshield Washer Pump V5 , removing and installing
- Windshield Washer Fluid Level Sensor G33 , removing and installing
- Washer nozzles for front windshield washer system, removing and installing
- Spray jets for front windshield washer system, checking
- Headlamp cleaning system
- Washer Hose Couplings
- Washer hoses, repairing
- Tightening Torques: Windshield wiper and washer system
- 94 - Lights, Switches - Exterior
- Headlight with one gas-discharge bulb
- Headlight with one gas-discharge bulb
- Main headlamp with one gas-discharge bulb, assembly overview
- Main headlamp, removing and installing
- Correcting installation position of headlamp
- Bulbs for main headlamps with one gas discharge bulb, replacing
- Automatic headlamp range control adjusting motor, removing and installing
- Removing and installing Headlamp Range Control Module
- Level control system sensor, removing and installing
- Headlight range control module, coding
- Main headlamp, adjusting
- Main headlamp with two gas-discharge bulbs
- Main headlamp with two gas-discharge bulbs
- Main headlamp with two gas-discharge bulbs, assembly overview
- Main headlamp, removing and installing
- Correcting installation position of headlamp
- Bulbs for main headlamps with two gas discharge bulbs, replacing
- Automatic headlamp range control adjusting motor, removing and installing
- Removing and installing Headlamp Range Control Module
- HID lamp high beam control module, removing and installing
- Level control system sensor, removing and installing
- Headlight range control module, coding
- Main headlamp, adjusting
- Fog lamps
- Mirror turn signals and entry lights in exterior mirror
- Taillamps
- Taillamps
- Taillamp assembly in side panel - assembly overview
- Taillight in rear lid, assembly overview
- Taillamp assembly in side panel, removing and installing
- Tail light assembly in luggage compartment lid, removing and installing
- Back-up light, removing and installing
- Gap dimensions of taillamp assemblies
- Rear light function, checking
- License Plate Lights
- High-Mount Brake Light
- Steering column switch
- Access/start authorization
- Access/start authorization
- Emergency release
- Access/Start Authorization Switch E415
- Access/Start Authorization Button E408
- Access/Start Control Module J518
- Access/start authorization antennas, assembly overview
- Access/start authorization antennas, removing and installing
- Notes
- Drivers Access/Start Authorization Antenna R134 , removing and installing
- Front Passengers Access/Start Authorization Antenna R135 , removing and installing
- Access/Start Authorization Antenna (in rear bumper) R136
- Luggage Compartment Access/Start Authorization Antenna R137 , removing and installing
- Interior Access/Start Authorization Antenna 1 R138 , removing and installing
- Interior Access/Start Authorization Antenna 2 R139 , removing and installing
- Interior Access/Start Authorization Antenna 3 R154 , removing and installing
- Antenna for Access/Start Authorization, checking
- Notes
- Checking Drivers Access/Start Authorization Antenna R134
- Checking Front Passengers Access/Start Authorization Antenna R135
- Checking Access/Start Authorization Antenna (in rear bumper) R136
- Checking Luggage Compartment Access/Start Authorization Antenna R137
- Checking Interior Access/Start Authorization Antenna 1 R138
- Checking Interior Access/Start Authorization Antenna 2 R139
- Checking Interior Access/Start Authorization Antenna 3 R154
- Antenna for Access/Start Authorization, tightening torques
- Parking aid
- Parking aid
- General information
- Parking assistance system - assembly overview
- Parking Aid Control Module J446 , removing and installing
- Front parking aid sensor, removing and installing
- Rear parking aid sensor, removing and installing
- Front parking aid display, removing and installing
- Rear parking aid display, removing
- Front side marker lamp, removing and installing
- Front windshield wiper system
- 96 - Lights, Switches - Interior, Anti-theft
- Interior lights and switches
- Lights and switches in the instrument panel
- Lights and switches in the instrument panel
- Light Switch E1 , removing and installing
- Instrument panel light dimmer switch E20 and trip odometer reset switch E123 , removing and installing
- Rear window shade switch E149 and parking aid button E266 , removing and installing
- Glove Compartment Light W6 , removing and installing
- Glove Compartment Lamp Switch E26 , removing and installing
- Steering Column Adjustment Switch E167 , removing and installing
- Footwell lights , removing and installing
- Front Doors - Lights and Switches
- Front Doors - Lights and Switches
- Central switch for window regulator, in drivers door E189 , switch for rear lid remote control lock E233 , and fuel tank lid unlock button E319 , removing and installing
- Right front window switch E41 , removing and installing
- Front Interior Locking Button E308 and E309 , removing and installing
- Front Door Opener Illumination L108 and L109 , removing and installing
- Front door contact switch, removing and installing
- Front Entry Light W31 and W32 , removing and installing
- Door Warning Light W30 and W36 , removing and installing
- Rear Doors - Lights and Switches
- Rear Doors - Lights and Switches
- Rear Window Switch E52 and E54 , removing and installing
- Rear Interior Locking Button E310 and E311 , removing and installing
- Rear Door Opener Illumination L110 and L111 , removing and installing
- Rear door contact switch, removing and installing
- Rear Entry Light W33 and W34 , removing and installing
- Rear Door Warning Light W37 and W38 , removing and installing
- Luggage Compartment - Lights and Switches
- Headliner - Lights and Switches
- Headliner - Lights and Switches
- Front interior light W1 , removing and installing
- Map/Reading Light W19 and W13 , removing and installing
- Sunroof Switch E8 , removing and installing
- Rear interior and reading lights, removing and installing
- Rear Interior Lamp Button E327 and E329 , removing and installing
- Removing and installing garage door opener
- Switch panel in roof module, removing and installing
- Center Console - Lights and Switches
- Center Console - Lights and Switches
- Mirror adjustment switch E43 with mirror selector switch E48 , removing and installing
- Access/start authorization button E408 , removing and installing
- Switch panel for front seat heating/ventilation with buttons for dampening, ESP, and level control in the center console, removing and installing
- Switch panel for rear seat position and heating/ventilation memory (4-seater), removing and installing
- Switch panel for rear seat adjustment (4-seater), removing and installing
- Switch panel for rear seat lumbar adjustment (5-seater), removing and installing
- Other electrical components
- 97 - Wiring
- Vehicle Diagnostic, Testing and Information Systems
- Fuse holder, relay panel, E-boxes and control modules, removing and installing
- Fuse holder, relay panel, E-boxes and control modules, removing and installing
- Fuse holder under the instrument panel, left, removing and installing
- Auxiliary fuse box in luggage compartment, left, removing and installing
- Thermal fuse box on driver side, removing and installing
- E-box in luggage compartment, left, removing and installing
- E-box in plenum chamber, right, removing and installing
- Relay carrier in right front footwell, removing and installing
- Vehicle electrical system control module, replacing
- Vehicle electrical system control module, removing and installing
- Roof electronics control module, removing and installing
- Wiring Harnesses and Connectors, Repairing
- 27 - Battery, Starter, Generator, Cruise control
- Electrical Equipment - General Information
- 27 - Battery, Starter, Generator, Cruise Control
- 90 - Instruments
- 92 - Windshield Wiper and Washer system
- 94 - Lights, Switches - Exterior
- 96 - Lights, Switches - Interior, Anti-theft
- 97 - Wiring
- Vehicle Diagnostic, Testing and Information Systems
- Wiring Harnesses and Connectors, Repairing
- Connector Repair Set VAS 6410
- Electrical Equipment
- Wiring Diagrams
- OEM Connector End Views
- Connector End Views
- Engine Control Module (ECM) Connector Side Connector End View (J623)
- Engine Control Module (ECM) 2 Connector Side Connector End View (J624)
- Tire Pressure Monitoring Control Module Connector Side Connector End View (J502)
- Battery Monitoring Control Module Connector Side Connector End View (J367)
- Control Module For Distance Regulation Connector Side Connector End View (J428)
- Access/Start Control Module Connector Side Connector End View (J518)
- Digital Sound System Control Module Connector Side Connector End View (J525)
- Memory Seat Control Module Connector End Views (J136, T26s*)
- Connector End Views
- Supplemental Restraint System Wiring Diagrams
- Using lemon2025'S System Wiring Diagrams
- OEM Connector End Views
- Body Electrical
- Engine Mechanical
- Cooling Fan
- 6.0L 12-CYL 4V Engine Mechanical, Fuel Injection & Ignition, Engine Code(S): BRP, Bap
- 00 - General, Technical Data
- 10 - Engine - Assembly
- 13 - Engine - Crankshaft, Cylinder Block
- 15 - Engine - Cylinder head, Valvetrain
- Cylinder Heads
- Chain Drive
- Valvetrain
- Valvetrain
- Valvetrain, Assembly Overview
- Valvetrain, Assembly Overview
- Camshafts, Checking Axial Play
- Before installing, lightly coat contact surface of bearing caps using grease G 052 723 A2
- Installation Position Camshaft Bearing Caps, Cylinder Bank 1
- Installation Position Camshaft Bearing Caps, Bank 2:
- Valve Dimensions:
- Camshaft Identification (Bank 1):
- Camshaft Identification (Bank 2):
- Disassembling and Assembling Control Housing:
- Valve Seats, Refacing
- Camshaft Adjuster Valves, Removing and Installing
- Camshafts, Removing and Installing
- Valve Guides, Checking
- Valve Stem Seals, Removing and Installing
- 17 - Engine - Lubrication
- Lubrication System Components
- Lubrication System Components
- Engine Oil Specifications
- Engine Oil Capacities
- Engine Oil Level, Checking
- Oil Pan, Engine Code BAP, Assembly Overview
- Oil Pan, Engine Code BRP, Assembly Overview
- Oil Pan, Lower Section, Removing and Installing
- Oil Pan, Upper Section, Removing and Installing
- Oil Pump, Assembly Overview
- Oil Pump, Removing and Installing
- Oil Filter Housing, Engine Code BAP, Assembly Overview
- Oil Filter Housing, Engine Code BRP, Assembly Overview
- Oil Pressure and Oil Pressure Switch, Checking
- Lubrication System Components
- 19 - Engine - Cooling System
- Cooling System Components
- Cooling System Components
- Radiator, Assembly Overview
- Fan, Assembly Overview
- Cooling System, Body Side, Overview
- Cooling System, Upper Engine, Overview
- Cooling System, Engine Rear and Side, Overview
- Cooling System, Engine Front, Overview
- Coolant Hose Connection Diagram
- Cooling System, Draining and Filling
- Radiator, Removing and Installing
- Coolant Pump, Removing and Installing
- Cooling System, Checking for Coolant Leaks
- Cooling System Components
- 20 - Fuel Supply
- Fuel Supply System Components
- Fuel Supply System Components
- Fuel Supply System, Safety Precautions
- Clean Working Conditions
- Fuel Tank with Fuel Filter, Assembly Overview
- Fuel Delivery Unit, Fuel Level Sensor and Suction Jet Pump, Right Side, Assembly Overview
- Fuel Delivery Unit, Fuel Level Sensor and Suction Jet Pump, Left Side, Assembly Overview
- Fuel Lines and Fuel Tank Components, Connection Diagram
- Fuel Tank, Draining
- Fuel Delivery Unit, Fuel Level Sensor and Suction Jet Pump, Right Side, Removing and Installing
- Fuel Delivery Unit, Fuel Level Sensor and Suction Jet Pump, Left Side, Removing and Installing
- Fuel Tank with Attachments and Fuel Filter, Removing and Installing
- Fuel Pumps, Checking
- Electronic Engine Power Control
- EVAP System
- Fuel Supply System Components
- 24 - Multiport Fuel Injection (MFI)
- Fuel Injection System
- Fuel Injection System
- Safety Precautions
- Clean Working Conditions
- General Information
- Technical Data
- Intake Manifold, Engine Code BAP, Assembly Overview
- Intake Manifold Upper Section, Engine Code BRP, Assembly Overview
- Intake Manifold Lower Section, Engine Code BRP, Assembly Overview
- Fuel Rail with Fuel Injectors, Assembly Overview
- Air Filter, Assembly Overview
- Oxygen Sensors
- Components, Checking
- Engine Control Module
- Fuel Injection System
- 26 - Exhaust system, Emission controls
- Exhaust System Components
- Exhaust System Components
- Exhaust Manifold with Primary Catalytic Converters and Bank 1 Attachments, Assembly Overview
- Exhaust Manifold with Primary Catalytic Converters and Bank 2 Attachments, Assembly Overview
- Primary Catalytic Converters with Exhaust Pipes, Aligning
- Muffler with Mounts, Assembly Overview
- Secondary Air Injection System
- Exhaust System Components
- 28 - Ignition/Glow Plug System
- 6.0L 12-CYL 4V Generic Scan Tool [BRP, Bap] - (20-Fuel Pump, Fuel Supply, Evaporative Emissions - 38-Automatic Transmission-Gears, Hydraulic Controls, Valve Body)
- 20 - Fuel Pump, Fuel Supply, Evaporative Emissions
- Fuel supply system, components
- Fuel supply system, components
- Working on fuel supply, safety precautions
- Rules of cleanliness
- Fuel tank with attachments and fuel filter - assembly overview
- Fuel delivery unit, sensor for fuel gauge and suction jet pump (right side), assembly overview
- Fuel delivery unit, sensor for fuel gauge and suction jet pump (left side), assembly overview
- Connection diagram for fuel lines and fuel tank components
- Empty fuel tank
- Fuel Pump (FP) unit, sender for fuel gauge and suction jet pump (right side), removing and installing
- Fuel Pump (FP) unit, sender for fuel gauge and suction jet pump (left side), removing and installing
- Fuel pumps, checking
- Notes
- Check function and voltage supply of fuel pumps
- Transfer Fuel Pump (FP) G23, test sequence
- Fuel Pump (FP) G6, test sequence
- Fuel Pump (FP), checking delivery quantity
- Flow quantity of Transfer Fuel Pump (FP) G23, checking
- Flow quantity of Fuel Pump (FP) G6, checking
- Current pick-up of Fuel Pumps (FP), checking
- Check-valves of Fuel Pumps (FP), checking
- Check-valve of Transfer Fuel Pump (FP) G23, checking
- Check-valve of Fuel Pump (FP) G6, checking
- EVAP canister system
- Electronic engine power control (EPC)
- Fuel supply system, components
- 24 - Multiport Fuel Injection (MFI)
- Fuel injection system, servicing
- Fuel injection system, servicing
- Fuel Injection system, general notes
- Safety precautions
- Rules of cleanliness
- Intake manifold, assembly overview (vehicles with engine code BAP)
- Upper section of intake manifold, assembly overview (vehicles with engine code BRP)
- Lower section of intake manifold, assembly overview (vehicles with engine code BRP)
- Fuel rail with fuel injectors - assembly overview
- Air filter - assembly overview
- Technical data
- Components of engine, checking
- Components of engine, checking
- Check oxygen sensor heater for oxygen sensors before catalytic converter
- Checking voltage supply and wiring to control module
- Ground (GND) activation of oxygen sensor heating, checking
- Oxygen sensor heater for oxygen sensors behind Three Way Catalytic Converter (TWC), checking
- Voltage supply and wiring to control module, checking
- Checking Ground (GND) activation of oxygen sensor heating
- Mass Air Flow (MAF) sensor, checking
- Voltage supply of Mass Air Flow (MAF) sensors, checking
- Checking signal and Ground wires of Mass Air Flow (MAF) Sensors
- Throttle valve control modules, checking
- Checking wires to Engine Control Module (ECM)
- Coolant temperature sensor, checking
- Intake Air Temperature (IAT) sensor, checking
- Engine Control Module (ECM), checking wires to
- Engine Coolant Temperature (ECT) Sensor (on Radiator), checking
- Thermostat for characteristic map controlled engine cooling
- Coolant FC (Fan Control) Control Modules, checking
- Engine Speed (RPM) sensor, checking
- Fuel injectors, checking
- Resistance values of fuel injectors, checking
- Voltage supply, checking
- Activation and voltage supply, checking
- Injection quantity and proper seal of fuel injectors, checking
- Injection quantity, checking
- Fuel pressure regulator and residual pressure, checking
- Intake system, checking for leaks (false air)
- Function tests
- Engine Control Modules (ECM)
- Additional signals, checking
- Fuel injection system, servicing
- 26 - Exhaust System, Emission Controls
- Exhaust system
- Exhaust system
- Exhaust System, general notes
- Exhaust manifold with primary catalytic converters and attachments cylinder bank 1, assembly overview
- Exhaust manifold with primary catalytic converters and attachments cylinder bank 2, assembly overview
- Primary catalytic converters with exhaust pipes, aligning
- Catalytic converter with muffler and attachments, assembly overview
- Three Way Catalytic Converters (TWC), checking
- Secondary air system
- Secondary air system
- Secondary Air Injection (AIR) system, general notes
- Secondary Air Injection (AIR) system, function
- Secondary Air Injection (AIR) system on body side - assembly overview
- Secondary Air Injection (AIR) system on engine side - assembly overview
- Secondary Air Injection (AIR) system, checking for proper seal
- Secondary Air Injection (AIR) pump motors, checking
- Secondary Air Injection (AIR) valves, checking (vehicles with engine code BAP)
- Engine Control Module (ECM), checking wires to
- Combination valves, checking (vehicles with engine code BAP)
- Exhaust system
- 28 - Ignition system
- Ignition, servicing
- Ignition, servicing
- Ignition System, general notes
- Safety precautions
- Rules of cleanliness
- Ignition - assembly overview
- Test Data, Spark Plugs
- Ignition coils with power output stage, removing and installing
- Ignition coils with power output stages, checking
- Engine Control Module (ECM), checking wires to
- Camshaft Position (CMP) sensor, checking
- Checking wires to Engine Control Module (ECM)
- Check knock sensors
- Check camshaft adjustment valves
- Ignition, servicing
- 38 - Automatic Transmission - Gears, Hydraulic Controls, Valve Body
- Electrical components for regulating transmission, checking
- Electrical components for regulating transmission, checking
- Safety precautions when working on transmission
- Rules of cleanliness
- Multi-Function Transmission Range (TR) Switch, replacing
- Multi-Function Transmission Range (TR) Switch, checking
- Sensor for transmission RPM, checking
- Transmission Output RPM, checking
- Transmission Fluid Temperature Sensor, checking
- Solenoid valves in valve body, checking
- Pressure regulator valves in valve body, checking
- Transmission Control Module (TCM)
- Electrical components for regulating transmission, checking
- 20 - Fuel Pump, Fuel Supply, Evaporative Emissions
- 6.0L 12-CYL 4V Engine Mechanical, Fuel Injection & Ignition, Engine Code(S): BRP, Bap
- Cooling System (Mechanical)
- 6.0L 12-CYL 4V Engine Mechanical, Fuel Injection & Ignition, Engine Code(S): BRP, Bap
- 00 - General, Technical Data
- 10 - Engine - Assembly
- 13 - Engine - Crankshaft, Cylinder Block
- 15 - Engine - Cylinder head, Valvetrain
- Cylinder Heads
- Chain Drive
- Valvetrain
- Valvetrain
- Valvetrain, Assembly Overview
- Valvetrain, Assembly Overview
- Camshafts, Checking Axial Play
- Before installing, lightly coat contact surface of bearing caps using grease G 052 723 A2
- Installation Position Camshaft Bearing Caps, Cylinder Bank 1
- Installation Position Camshaft Bearing Caps, Bank 2:
- Valve Dimensions:
- Camshaft Identification (Bank 1):
- Camshaft Identification (Bank 2):
- Disassembling and Assembling Control Housing:
- Valve Seats, Refacing
- Camshaft Adjuster Valves, Removing and Installing
- Camshafts, Removing and Installing
- Valve Guides, Checking
- Valve Stem Seals, Removing and Installing
- 17 - Engine - Lubrication
- Lubrication System Components
- Lubrication System Components
- Engine Oil Specifications
- Engine Oil Capacities
- Engine Oil Level, Checking
- Oil Pan, Engine Code BAP, Assembly Overview
- Oil Pan, Engine Code BRP, Assembly Overview
- Oil Pan, Lower Section, Removing and Installing
- Oil Pan, Upper Section, Removing and Installing
- Oil Pump, Assembly Overview
- Oil Pump, Removing and Installing
- Oil Filter Housing, Engine Code BAP, Assembly Overview
- Oil Filter Housing, Engine Code BRP, Assembly Overview
- Oil Pressure and Oil Pressure Switch, Checking
- Lubrication System Components
- 19 - Engine - Cooling System
- Cooling System Components
- Cooling System Components
- Radiator, Assembly Overview
- Fan, Assembly Overview
- Cooling System, Body Side, Overview
- Cooling System, Upper Engine, Overview
- Cooling System, Engine Rear and Side, Overview
- Cooling System, Engine Front, Overview
- Coolant Hose Connection Diagram
- Cooling System, Draining and Filling
- Radiator, Removing and Installing
- Coolant Pump, Removing and Installing
- Cooling System, Checking for Coolant Leaks
- Cooling System Components
- 20 - Fuel Supply
- Fuel Supply System Components
- Fuel Supply System Components
- Fuel Supply System, Safety Precautions
- Clean Working Conditions
- Fuel Tank with Fuel Filter, Assembly Overview
- Fuel Delivery Unit, Fuel Level Sensor and Suction Jet Pump, Right Side, Assembly Overview
- Fuel Delivery Unit, Fuel Level Sensor and Suction Jet Pump, Left Side, Assembly Overview
- Fuel Lines and Fuel Tank Components, Connection Diagram
- Fuel Tank, Draining
- Fuel Delivery Unit, Fuel Level Sensor and Suction Jet Pump, Right Side, Removing and Installing
- Fuel Delivery Unit, Fuel Level Sensor and Suction Jet Pump, Left Side, Removing and Installing
- Fuel Tank with Attachments and Fuel Filter, Removing and Installing
- Fuel Pumps, Checking
- Electronic Engine Power Control
- EVAP System
- Fuel Supply System Components
- 24 - Multiport Fuel Injection (MFI)
- Fuel Injection System
- Fuel Injection System
- Safety Precautions
- Clean Working Conditions
- General Information
- Technical Data
- Intake Manifold, Engine Code BAP, Assembly Overview
- Intake Manifold Upper Section, Engine Code BRP, Assembly Overview
- Intake Manifold Lower Section, Engine Code BRP, Assembly Overview
- Fuel Rail with Fuel Injectors, Assembly Overview
- Air Filter, Assembly Overview
- Oxygen Sensors
- Components, Checking
- Engine Control Module
- Fuel Injection System
- 26 - Exhaust system, Emission controls
- Exhaust System Components
- Exhaust System Components
- Exhaust Manifold with Primary Catalytic Converters and Bank 1 Attachments, Assembly Overview
- Exhaust Manifold with Primary Catalytic Converters and Bank 2 Attachments, Assembly Overview
- Primary Catalytic Converters with Exhaust Pipes, Aligning
- Muffler with Mounts, Assembly Overview
- Secondary Air Injection System
- Exhaust System Components
- 28 - Ignition/Glow Plug System
- 6.0L 12-CYL 4V Engine Mechanical, Fuel Injection & Ignition, Engine Code(S): BRP, Bap
- Exhaust
- 6.0L 12-CYL 4V Engine Mechanical, Fuel Injection & Ignition, Engine Code(S): BRP, Bap
- 00 - General, Technical Data
- 10 - Engine - Assembly
- 13 - Engine - Crankshaft, Cylinder Block
- 15 - Engine - Cylinder head, Valvetrain
- Cylinder Heads
- Chain Drive
- Valvetrain
- Valvetrain
- Valvetrain, Assembly Overview
- Valvetrain, Assembly Overview
- Camshafts, Checking Axial Play
- Before installing, lightly coat contact surface of bearing caps using grease G 052 723 A2
- Installation Position Camshaft Bearing Caps, Cylinder Bank 1
- Installation Position Camshaft Bearing Caps, Bank 2:
- Valve Dimensions:
- Camshaft Identification (Bank 1):
- Camshaft Identification (Bank 2):
- Disassembling and Assembling Control Housing:
- Valve Seats, Refacing
- Camshaft Adjuster Valves, Removing and Installing
- Camshafts, Removing and Installing
- Valve Guides, Checking
- Valve Stem Seals, Removing and Installing
- 17 - Engine - Lubrication
- Lubrication System Components
- Lubrication System Components
- Engine Oil Specifications
- Engine Oil Capacities
- Engine Oil Level, Checking
- Oil Pan, Engine Code BAP, Assembly Overview
- Oil Pan, Engine Code BRP, Assembly Overview
- Oil Pan, Lower Section, Removing and Installing
- Oil Pan, Upper Section, Removing and Installing
- Oil Pump, Assembly Overview
- Oil Pump, Removing and Installing
- Oil Filter Housing, Engine Code BAP, Assembly Overview
- Oil Filter Housing, Engine Code BRP, Assembly Overview
- Oil Pressure and Oil Pressure Switch, Checking
- Lubrication System Components
- 19 - Engine - Cooling System
- Cooling System Components
- Cooling System Components
- Radiator, Assembly Overview
- Fan, Assembly Overview
- Cooling System, Body Side, Overview
- Cooling System, Upper Engine, Overview
- Cooling System, Engine Rear and Side, Overview
- Cooling System, Engine Front, Overview
- Coolant Hose Connection Diagram
- Cooling System, Draining and Filling
- Radiator, Removing and Installing
- Coolant Pump, Removing and Installing
- Cooling System, Checking for Coolant Leaks
- Cooling System Components
- 20 - Fuel Supply
- Fuel Supply System Components
- Fuel Supply System Components
- Fuel Supply System, Safety Precautions
- Clean Working Conditions
- Fuel Tank with Fuel Filter, Assembly Overview
- Fuel Delivery Unit, Fuel Level Sensor and Suction Jet Pump, Right Side, Assembly Overview
- Fuel Delivery Unit, Fuel Level Sensor and Suction Jet Pump, Left Side, Assembly Overview
- Fuel Lines and Fuel Tank Components, Connection Diagram
- Fuel Tank, Draining
- Fuel Delivery Unit, Fuel Level Sensor and Suction Jet Pump, Right Side, Removing and Installing
- Fuel Delivery Unit, Fuel Level Sensor and Suction Jet Pump, Left Side, Removing and Installing
- Fuel Tank with Attachments and Fuel Filter, Removing and Installing
- Fuel Pumps, Checking
- Electronic Engine Power Control
- EVAP System
- Fuel Supply System Components
- 24 - Multiport Fuel Injection (MFI)
- Fuel Injection System
- Fuel Injection System
- Safety Precautions
- Clean Working Conditions
- General Information
- Technical Data
- Intake Manifold, Engine Code BAP, Assembly Overview
- Intake Manifold Upper Section, Engine Code BRP, Assembly Overview
- Intake Manifold Lower Section, Engine Code BRP, Assembly Overview
- Fuel Rail with Fuel Injectors, Assembly Overview
- Air Filter, Assembly Overview
- Oxygen Sensors
- Components, Checking
- Engine Control Module
- Fuel Injection System
- 26 - Exhaust system, Emission controls
- Exhaust System Components
- Exhaust System Components
- Exhaust Manifold with Primary Catalytic Converters and Bank 1 Attachments, Assembly Overview
- Exhaust Manifold with Primary Catalytic Converters and Bank 2 Attachments, Assembly Overview
- Primary Catalytic Converters with Exhaust Pipes, Aligning
- Muffler with Mounts, Assembly Overview
- Secondary Air Injection System
- Exhaust System Components
- 28 - Ignition/Glow Plug System
- 6.0L 12-CYL 4V Engine Mechanical, Fuel Injection & Ignition, Engine Code(S): BRP, Bap
- Fuel System
- 6.0L 12-CYL 4V Engine Mechanical, Fuel Injection & Ignition, Engine Code(S): BRP, Bap
- 00 - General, Technical Data
- 10 - Engine - Assembly
- 13 - Engine - Crankshaft, Cylinder Block
- 15 - Engine - Cylinder head, Valvetrain
- Cylinder Heads
- Chain Drive
- Valvetrain
- Valvetrain
- Valvetrain, Assembly Overview
- Valvetrain, Assembly Overview
- Camshafts, Checking Axial Play
- Before installing, lightly coat contact surface of bearing caps using grease G 052 723 A2
- Installation Position Camshaft Bearing Caps, Cylinder Bank 1
- Installation Position Camshaft Bearing Caps, Bank 2:
- Valve Dimensions:
- Camshaft Identification (Bank 1):
- Camshaft Identification (Bank 2):
- Disassembling and Assembling Control Housing:
- Valve Seats, Refacing
- Camshaft Adjuster Valves, Removing and Installing
- Camshafts, Removing and Installing
- Valve Guides, Checking
- Valve Stem Seals, Removing and Installing
- 17 - Engine - Lubrication
- Lubrication System Components
- Lubrication System Components
- Engine Oil Specifications
- Engine Oil Capacities
- Engine Oil Level, Checking
- Oil Pan, Engine Code BAP, Assembly Overview
- Oil Pan, Engine Code BRP, Assembly Overview
- Oil Pan, Lower Section, Removing and Installing
- Oil Pan, Upper Section, Removing and Installing
- Oil Pump, Assembly Overview
- Oil Pump, Removing and Installing
- Oil Filter Housing, Engine Code BAP, Assembly Overview
- Oil Filter Housing, Engine Code BRP, Assembly Overview
- Oil Pressure and Oil Pressure Switch, Checking
- Lubrication System Components
- 19 - Engine - Cooling System
- Cooling System Components
- Cooling System Components
- Radiator, Assembly Overview
- Fan, Assembly Overview
- Cooling System, Body Side, Overview
- Cooling System, Upper Engine, Overview
- Cooling System, Engine Rear and Side, Overview
- Cooling System, Engine Front, Overview
- Coolant Hose Connection Diagram
- Cooling System, Draining and Filling
- Radiator, Removing and Installing
- Coolant Pump, Removing and Installing
- Cooling System, Checking for Coolant Leaks
- Cooling System Components
- 20 - Fuel Supply
- Fuel Supply System Components
- Fuel Supply System Components
- Fuel Supply System, Safety Precautions
- Clean Working Conditions
- Fuel Tank with Fuel Filter, Assembly Overview
- Fuel Delivery Unit, Fuel Level Sensor and Suction Jet Pump, Right Side, Assembly Overview
- Fuel Delivery Unit, Fuel Level Sensor and Suction Jet Pump, Left Side, Assembly Overview
- Fuel Lines and Fuel Tank Components, Connection Diagram
- Fuel Tank, Draining
- Fuel Delivery Unit, Fuel Level Sensor and Suction Jet Pump, Right Side, Removing and Installing
- Fuel Delivery Unit, Fuel Level Sensor and Suction Jet Pump, Left Side, Removing and Installing
- Fuel Tank with Attachments and Fuel Filter, Removing and Installing
- Fuel Pumps, Checking
- Electronic Engine Power Control
- EVAP System
- Fuel Supply System Components
- 24 - Multiport Fuel Injection (MFI)
- Fuel Injection System
- Fuel Injection System
- Safety Precautions
- Clean Working Conditions
- General Information
- Technical Data
- Intake Manifold, Engine Code BAP, Assembly Overview
- Intake Manifold Upper Section, Engine Code BRP, Assembly Overview
- Intake Manifold Lower Section, Engine Code BRP, Assembly Overview
- Fuel Rail with Fuel Injectors, Assembly Overview
- Air Filter, Assembly Overview
- Oxygen Sensors
- Components, Checking
- Engine Control Module
- Fuel Injection System
- 26 - Exhaust system, Emission controls
- Exhaust System Components
- Exhaust System Components
- Exhaust Manifold with Primary Catalytic Converters and Bank 1 Attachments, Assembly Overview
- Exhaust Manifold with Primary Catalytic Converters and Bank 2 Attachments, Assembly Overview
- Primary Catalytic Converters with Exhaust Pipes, Aligning
- Muffler with Mounts, Assembly Overview
- Secondary Air Injection System
- Exhaust System Components
- 28 - Ignition/Glow Plug System
- 6.0L 12-CYL 4V Engine Mechanical, Fuel Injection & Ignition, Engine Code(S): BRP, Bap
- 6.0L 12-CYL 4V Engine Mechanical, Fuel Injection & Ignition, Engine Code(S): BRP, Bap
- 00 - General, Technical Data
- 10 - Engine - Assembly
- 13 - Engine - Crankshaft, Cylinder Block
- 15 - Engine - Cylinder head, Valvetrain
- Cylinder Heads
- Chain Drive
- Valvetrain
- Valvetrain
- Valvetrain, Assembly Overview
- Valvetrain, Assembly Overview
- Camshafts, Checking Axial Play
- Before installing, lightly coat contact surface of bearing caps using grease G 052 723 A2
- Installation Position Camshaft Bearing Caps, Cylinder Bank 1
- Installation Position Camshaft Bearing Caps, Bank 2:
- Valve Dimensions:
- Camshaft Identification (Bank 1):
- Camshaft Identification (Bank 2):
- Disassembling and Assembling Control Housing:
- Valve Seats, Refacing
- Camshaft Adjuster Valves, Removing and Installing
- Camshafts, Removing and Installing
- Valve Guides, Checking
- Valve Stem Seals, Removing and Installing
- 17 - Engine - Lubrication
- Lubrication System Components
- Lubrication System Components
- Engine Oil Specifications
- Engine Oil Capacities
- Engine Oil Level, Checking
- Oil Pan, Engine Code BAP, Assembly Overview
- Oil Pan, Engine Code BRP, Assembly Overview
- Oil Pan, Lower Section, Removing and Installing
- Oil Pan, Upper Section, Removing and Installing
- Oil Pump, Assembly Overview
- Oil Pump, Removing and Installing
- Oil Filter Housing, Engine Code BAP, Assembly Overview
- Oil Filter Housing, Engine Code BRP, Assembly Overview
- Oil Pressure and Oil Pressure Switch, Checking
- Lubrication System Components
- 19 - Engine - Cooling System
- Cooling System Components
- Cooling System Components
- Radiator, Assembly Overview
- Fan, Assembly Overview
- Cooling System, Body Side, Overview
- Cooling System, Upper Engine, Overview
- Cooling System, Engine Rear and Side, Overview
- Cooling System, Engine Front, Overview
- Coolant Hose Connection Diagram
- Cooling System, Draining and Filling
- Radiator, Removing and Installing
- Coolant Pump, Removing and Installing
- Cooling System, Checking for Coolant Leaks
- Cooling System Components
- 20 - Fuel Supply
- Fuel Supply System Components
- Fuel Supply System Components
- Fuel Supply System, Safety Precautions
- Clean Working Conditions
- Fuel Tank with Fuel Filter, Assembly Overview
- Fuel Delivery Unit, Fuel Level Sensor and Suction Jet Pump, Right Side, Assembly Overview
- Fuel Delivery Unit, Fuel Level Sensor and Suction Jet Pump, Left Side, Assembly Overview
- Fuel Lines and Fuel Tank Components, Connection Diagram
- Fuel Tank, Draining
- Fuel Delivery Unit, Fuel Level Sensor and Suction Jet Pump, Right Side, Removing and Installing
- Fuel Delivery Unit, Fuel Level Sensor and Suction Jet Pump, Left Side, Removing and Installing
- Fuel Tank with Attachments and Fuel Filter, Removing and Installing
- Fuel Pumps, Checking
- Electronic Engine Power Control
- EVAP System
- Fuel Supply System Components
- 24 - Multiport Fuel Injection (MFI)
- Fuel Injection System
- Fuel Injection System
- Safety Precautions
- Clean Working Conditions
- General Information
- Technical Data
- Intake Manifold, Engine Code BAP, Assembly Overview
- Intake Manifold Upper Section, Engine Code BRP, Assembly Overview
- Intake Manifold Lower Section, Engine Code BRP, Assembly Overview
- Fuel Rail with Fuel Injectors, Assembly Overview
- Air Filter, Assembly Overview
- Oxygen Sensors
- Components, Checking
- Engine Control Module
- Fuel Injection System
- 26 - Exhaust system, Emission controls
- Exhaust System Components
- Exhaust System Components
- Exhaust Manifold with Primary Catalytic Converters and Bank 1 Attachments, Assembly Overview
- Exhaust Manifold with Primary Catalytic Converters and Bank 2 Attachments, Assembly Overview
- Primary Catalytic Converters with Exhaust Pipes, Aligning
- Muffler with Mounts, Assembly Overview
- Secondary Air Injection System
- Exhaust System Components
- 28 - Ignition/Glow Plug System
- Starter
- Electrical Equipment
- 27 - Battery, Starter, Generator, Cruise control
- Battery
- Battery, checking
- Battery, charging
- Battery, disconnecting and reconnecting
- Battery, disconnecting and reconnecting
- Battery (vehicles with two-battery concept), disconnecting and connecting
- Notes
- Battery disconnecting and reconnecting sequence
- Disconnecting battery in luggage compartment, right
- Disconnecting second battery in luggage compartment, left
- Batteries, reconnecting sequence
- Connecting second battery in luggage compartment, left
- Connecting battery in luggage compartment, right
- Work steps required after reconnecting battery
- Battery - vehicles with electric closing assist, disconnecting and connecting
- Battery, removing and installing
- Battery cut-out relay J7 , removing and installing
- Battery cut-off
- Battery monitoring control module J367 , removing and installing
- Tightening Torques: Battery
- Starter
- Tightening Torques: Starter
- Generator, removing and installing
- Generator, removing and installing
- Generator features
- Ribbed belt, checking
- Generator (8-cyl. Gasoline engine), assembly overview
- Generator (8-cyl. gasoline engine), removing and installing
- Generator, 12-cyl. Gasoline engine
- Generator (12-cyl. gasoline engine), removing and installing
- Generator ribbed belt pulley, removing and installing
- Tightening Torques: Generator
- Adaptive Cruise Control (ACC)
- Cruise control system (CCS), removing and installing
- 90 - Instruments
- Instrument cluster
- Service interval indicator
- 92 - Windshield wiper and washer system
- Front windshield wiper system
- Front windshield wiper system
- General information
- Front windshield wiper system, removing and installing
- Notes
- Front windshield wiper system, removing
- Wiper arms, removing
- Plenum chamber cover, removing
- Cowl, removing
- Drivers side wiper frame, installing
- Left wiper frame, removing
- Removing wiper motor from left wiper frame
- Installing wiper motor into left wiper frame
- Right wiper frame, removing
- Removing wiper motor from wiper frame
- Installing wiper motor into right wiper frame
- Rest position of windshield wiper blades, adjusting
- Aero wipers, removing and installing
- Rain sensor G213 , removing and installing
- Windshield washer system
- Windshield washer system
- Front windshield washer system - assembly overview
- Washer fluid reservoir, removing and installing
- Windshield Washer Pump V5 , removing and installing
- Windshield Washer Fluid Level Sensor G33 , removing and installing
- Washer nozzles for front windshield washer system, removing and installing
- Spray jets for front windshield washer system, checking
- Headlamp cleaning system
- Washer Hose Couplings
- Washer hoses, repairing
- Tightening Torques: Windshield wiper and washer system
- 94 - Lights, Switches - Exterior
- Headlight with one gas-discharge bulb
- Headlight with one gas-discharge bulb
- Main headlamp with one gas-discharge bulb, assembly overview
- Main headlamp, removing and installing
- Correcting installation position of headlamp
- Bulbs for main headlamps with one gas discharge bulb, replacing
- Automatic headlamp range control adjusting motor, removing and installing
- Removing and installing Headlamp Range Control Module
- Level control system sensor, removing and installing
- Headlight range control module, coding
- Main headlamp, adjusting
- Main headlamp with two gas-discharge bulbs
- Main headlamp with two gas-discharge bulbs
- Main headlamp with two gas-discharge bulbs, assembly overview
- Main headlamp, removing and installing
- Correcting installation position of headlamp
- Bulbs for main headlamps with two gas discharge bulbs, replacing
- Automatic headlamp range control adjusting motor, removing and installing
- Removing and installing Headlamp Range Control Module
- HID lamp high beam control module, removing and installing
- Level control system sensor, removing and installing
- Headlight range control module, coding
- Main headlamp, adjusting
- Fog lamps
- Mirror turn signals and entry lights in exterior mirror
- Taillamps
- Taillamps
- Taillamp assembly in side panel - assembly overview
- Taillight in rear lid, assembly overview
- Taillamp assembly in side panel, removing and installing
- Tail light assembly in luggage compartment lid, removing and installing
- Back-up light, removing and installing
- Gap dimensions of taillamp assemblies
- Rear light function, checking
- License Plate Lights
- High-Mount Brake Light
- Steering column switch
- Access/start authorization
- Access/start authorization
- Emergency release
- Access/Start Authorization Switch E415
- Access/Start Authorization Button E408
- Access/Start Control Module J518
- Access/start authorization antennas, assembly overview
- Access/start authorization antennas, removing and installing
- Notes
- Drivers Access/Start Authorization Antenna R134 , removing and installing
- Front Passengers Access/Start Authorization Antenna R135 , removing and installing
- Access/Start Authorization Antenna (in rear bumper) R136
- Luggage Compartment Access/Start Authorization Antenna R137 , removing and installing
- Interior Access/Start Authorization Antenna 1 R138 , removing and installing
- Interior Access/Start Authorization Antenna 2 R139 , removing and installing
- Interior Access/Start Authorization Antenna 3 R154 , removing and installing
- Antenna for Access/Start Authorization, checking
- Notes
- Checking Drivers Access/Start Authorization Antenna R134
- Checking Front Passengers Access/Start Authorization Antenna R135
- Checking Access/Start Authorization Antenna (in rear bumper) R136
- Checking Luggage Compartment Access/Start Authorization Antenna R137
- Checking Interior Access/Start Authorization Antenna 1 R138
- Checking Interior Access/Start Authorization Antenna 2 R139
- Checking Interior Access/Start Authorization Antenna 3 R154
- Antenna for Access/Start Authorization, tightening torques
- Parking aid
- Parking aid
- General information
- Parking assistance system - assembly overview
- Parking Aid Control Module J446 , removing and installing
- Front parking aid sensor, removing and installing
- Rear parking aid sensor, removing and installing
- Front parking aid display, removing and installing
- Rear parking aid display, removing
- Front side marker lamp, removing and installing
- Front windshield wiper system
- 96 - Lights, Switches - Interior, Anti-theft
- Interior lights and switches
- Lights and switches in the instrument panel
- Lights and switches in the instrument panel
- Light Switch E1 , removing and installing
- Instrument panel light dimmer switch E20 and trip odometer reset switch E123 , removing and installing
- Rear window shade switch E149 and parking aid button E266 , removing and installing
- Glove Compartment Light W6 , removing and installing
- Glove Compartment Lamp Switch E26 , removing and installing
- Steering Column Adjustment Switch E167 , removing and installing
- Footwell lights , removing and installing
- Front Doors - Lights and Switches
- Front Doors - Lights and Switches
- Central switch for window regulator, in drivers door E189 , switch for rear lid remote control lock E233 , and fuel tank lid unlock button E319 , removing and installing
- Right front window switch E41 , removing and installing
- Front Interior Locking Button E308 and E309 , removing and installing
- Front Door Opener Illumination L108 and L109 , removing and installing
- Front door contact switch, removing and installing
- Front Entry Light W31 and W32 , removing and installing
- Door Warning Light W30 and W36 , removing and installing
- Rear Doors - Lights and Switches
- Rear Doors - Lights and Switches
- Rear Window Switch E52 and E54 , removing and installing
- Rear Interior Locking Button E310 and E311 , removing and installing
- Rear Door Opener Illumination L110 and L111 , removing and installing
- Rear door contact switch, removing and installing
- Rear Entry Light W33 and W34 , removing and installing
- Rear Door Warning Light W37 and W38 , removing and installing
- Luggage Compartment - Lights and Switches
- Headliner - Lights and Switches
- Headliner - Lights and Switches
- Front interior light W1 , removing and installing
- Map/Reading Light W19 and W13 , removing and installing
- Sunroof Switch E8 , removing and installing
- Rear interior and reading lights, removing and installing
- Rear Interior Lamp Button E327 and E329 , removing and installing
- Removing and installing garage door opener
- Switch panel in roof module, removing and installing
- Center Console - Lights and Switches
- Center Console - Lights and Switches
- Mirror adjustment switch E43 with mirror selector switch E48 , removing and installing
- Access/start authorization button E408 , removing and installing
- Switch panel for front seat heating/ventilation with buttons for dampening, ESP, and level control in the center console, removing and installing
- Switch panel for rear seat position and heating/ventilation memory (4-seater), removing and installing
- Switch panel for rear seat adjustment (4-seater), removing and installing
- Switch panel for rear seat lumbar adjustment (5-seater), removing and installing
- Other electrical components
- 97 - Wiring
- Vehicle Diagnostic, Testing and Information Systems
- Fuse holder, relay panel, E-boxes and control modules, removing and installing
- Fuse holder, relay panel, E-boxes and control modules, removing and installing
- Fuse holder under the instrument panel, left, removing and installing
- Auxiliary fuse box in luggage compartment, left, removing and installing
- Thermal fuse box on driver side, removing and installing
- E-box in luggage compartment, left, removing and installing
- E-box in plenum chamber, right, removing and installing
- Relay carrier in right front footwell, removing and installing
- Vehicle electrical system control module, replacing
- Vehicle electrical system control module, removing and installing
- Roof electronics control module, removing and installing
- Wiring Harnesses and Connectors, Repairing
- 27 - Battery, Starter, Generator, Cruise control
- Electrical Equipment - General Information
- 27 - Battery, Starter, Generator, Cruise Control
- 90 - Instruments
- 92 - Windshield Wiper and Washer system
- 94 - Lights, Switches - Exterior
- 96 - Lights, Switches - Interior, Anti-theft
- 97 - Wiring
- Vehicle Diagnostic, Testing and Information Systems
- Wiring Harnesses and Connectors, Repairing
- Connector Repair Set VAS 6410
- Electrical Equipment
- Cooling Fan
- Engine Performance
- Emissions
- Emission Applications
- Emission Control Abbreviations
- State Emission Standards - Diesel
- State Emission Standards - Gas
- ALASKA
- ARIZONA
- CALIFORNIA
- Colorado
- CONNECTICUT
- DELAWARE
- District Of COLUMBIA
- GEORGIA
- IDAHO
- ILLINOIS
- INDIANA
- KENTUCKY
- MARYLAND
- MASSACHUSETTS
- MISSOURI
- NEVADA
- New Jersey
- New MEXICO
- New YORK
- North CAROLINA
- OHIO
- OREGON
- PENNSYLVANIA
- RHODE Island
- TENNESSEE
- TEXAS
- UTAH
- VIRGINIA
- WASHINGTON
- WISCONSIN
- U. S. EPA ASM2525 & ASM5015 Start-Up Emission Standards
- U. S. EPA Revised Final ASM Emission Standards (ASM5015 & ASM2525)
- U.S. EPA Im240 Emission Standards
- Engine Control Systems
- 6.0L 12-CYL 4V Generic Scan Tool [BRP, Bap] - 01-On Board Diagnostic
- 01 - On Board Diagnostic (OBD)
- General information for On Board Diagnostic (OBD)
- General information for On Board Diagnostic (OBD)
- Characteristics of On Board Diagnostic (OBD)
- On Board Diagnostic (OBD), technical data
- Diagnostic tester, connecting
- Test box, connecting for wiring test
- Connecting test box to wiring harness of Engine Control Modules (ECM)
- Connecting test box to Transmission Control Module (TCM)
- Diagnostic mode, selecting
- Diagnostic mode, selecting
- Recommended special tools and equipment e.g.:
- Address word 33 - On-Board Diagnostic (OBD)
- Diagnostic mode 1: Check measured values
- Diagnostic mode 2: Check operating conditions
- Diagnostic mode 3: Check DTC Memory
- Diagnostic mode 4: Reset/erase diagnostic data
- Diagnostic mode 5: Check lambda test results
- Diagnostic mode 6: Check test results of components that are not continuously monitored
- Notes
- Test-ID 1 ($1): Catalytic converter monitoring
- Test-ID 2 ($2): Oxygen sensor monitoring (vehicles with engine code BRP)
- Test-ID 3 ($3): Secondary air system
- Test-ID 5 ($5): Tank ventilation system
- Test-ID 6 ($6): Oxygen sensor heater monitoring (vehicles with engine code BRP)
- Test-ID 9 ($9): Engine Coolant Temperature (ECT) Sensor G62 (vehicles with engine code BAP)
- Diagnostic mode 7: Check test results of components that are continuously monitored
- Diagnostic mode 8: Tank leak test
- Diagnostic mode 9: Vehicle information
- Readiness code
- DTC tables
- General information for On Board Diagnostic (OBD)
- 01 - On Board Diagnostic (OBD)
- 6.0L 12-CYL 4V Generic Scan Tool [BRP, Bap] - 01-On Board Diagnostic
- Fuel Delivery
- 6.0L 12-CYL 4V Engine Mechanical, Fuel Injection & Ignition, Engine Code(S): BRP, Bap
- 00 - General, Technical Data
- 10 - Engine - Assembly
- 13 - Engine - Crankshaft, Cylinder Block
- 15 - Engine - Cylinder head, Valvetrain
- Cylinder Heads
- Chain Drive
- Valvetrain
- Valvetrain
- Valvetrain, Assembly Overview
- Valvetrain, Assembly Overview
- Camshafts, Checking Axial Play
- Before installing, lightly coat contact surface of bearing caps using grease G 052 723 A2
- Installation Position Camshaft Bearing Caps, Cylinder Bank 1
- Installation Position Camshaft Bearing Caps, Bank 2:
- Valve Dimensions:
- Camshaft Identification (Bank 1):
- Camshaft Identification (Bank 2):
- Disassembling and Assembling Control Housing:
- Valve Seats, Refacing
- Camshaft Adjuster Valves, Removing and Installing
- Camshafts, Removing and Installing
- Valve Guides, Checking
- Valve Stem Seals, Removing and Installing
- 17 - Engine - Lubrication
- Lubrication System Components
- Lubrication System Components
- Engine Oil Specifications
- Engine Oil Capacities
- Engine Oil Level, Checking
- Oil Pan, Engine Code BAP, Assembly Overview
- Oil Pan, Engine Code BRP, Assembly Overview
- Oil Pan, Lower Section, Removing and Installing
- Oil Pan, Upper Section, Removing and Installing
- Oil Pump, Assembly Overview
- Oil Pump, Removing and Installing
- Oil Filter Housing, Engine Code BAP, Assembly Overview
- Oil Filter Housing, Engine Code BRP, Assembly Overview
- Oil Pressure and Oil Pressure Switch, Checking
- Lubrication System Components
- 19 - Engine - Cooling System
- Cooling System Components
- Cooling System Components
- Radiator, Assembly Overview
- Fan, Assembly Overview
- Cooling System, Body Side, Overview
- Cooling System, Upper Engine, Overview
- Cooling System, Engine Rear and Side, Overview
- Cooling System, Engine Front, Overview
- Coolant Hose Connection Diagram
- Cooling System, Draining and Filling
- Radiator, Removing and Installing
- Coolant Pump, Removing and Installing
- Cooling System, Checking for Coolant Leaks
- Cooling System Components
- 20 - Fuel Supply
- Fuel Supply System Components
- Fuel Supply System Components
- Fuel Supply System, Safety Precautions
- Clean Working Conditions
- Fuel Tank with Fuel Filter, Assembly Overview
- Fuel Delivery Unit, Fuel Level Sensor and Suction Jet Pump, Right Side, Assembly Overview
- Fuel Delivery Unit, Fuel Level Sensor and Suction Jet Pump, Left Side, Assembly Overview
- Fuel Lines and Fuel Tank Components, Connection Diagram
- Fuel Tank, Draining
- Fuel Delivery Unit, Fuel Level Sensor and Suction Jet Pump, Right Side, Removing and Installing
- Fuel Delivery Unit, Fuel Level Sensor and Suction Jet Pump, Left Side, Removing and Installing
- Fuel Tank with Attachments and Fuel Filter, Removing and Installing
- Fuel Pumps, Checking
- Electronic Engine Power Control
- EVAP System
- Fuel Supply System Components
- 24 - Multiport Fuel Injection (MFI)
- Fuel Injection System
- Fuel Injection System
- Safety Precautions
- Clean Working Conditions
- General Information
- Technical Data
- Intake Manifold, Engine Code BAP, Assembly Overview
- Intake Manifold Upper Section, Engine Code BRP, Assembly Overview
- Intake Manifold Lower Section, Engine Code BRP, Assembly Overview
- Fuel Rail with Fuel Injectors, Assembly Overview
- Air Filter, Assembly Overview
- Oxygen Sensors
- Components, Checking
- Engine Control Module
- Fuel Injection System
- 26 - Exhaust system, Emission controls
- Exhaust System Components
- Exhaust System Components
- Exhaust Manifold with Primary Catalytic Converters and Bank 1 Attachments, Assembly Overview
- Exhaust Manifold with Primary Catalytic Converters and Bank 2 Attachments, Assembly Overview
- Primary Catalytic Converters with Exhaust Pipes, Aligning
- Muffler with Mounts, Assembly Overview
- Secondary Air Injection System
- Exhaust System Components
- 28 - Ignition/Glow Plug System
- 6.0L 12-CYL 4V Engine Mechanical, Fuel Injection & Ignition, Engine Code(S): BRP, Bap
- Ignition System
- 6.0L 12-CYL 4V Engine Mechanical, Fuel Injection & Ignition, Engine Code(S): BRP, Bap
- 00 - General, Technical Data
- 10 - Engine - Assembly
- 13 - Engine - Crankshaft, Cylinder Block
- 15 - Engine - Cylinder head, Valvetrain
- Cylinder Heads
- Chain Drive
- Valvetrain
- Valvetrain
- Valvetrain, Assembly Overview
- Valvetrain, Assembly Overview
- Camshafts, Checking Axial Play
- Before installing, lightly coat contact surface of bearing caps using grease G 052 723 A2
- Installation Position Camshaft Bearing Caps, Cylinder Bank 1
- Installation Position Camshaft Bearing Caps, Bank 2:
- Valve Dimensions:
- Camshaft Identification (Bank 1):
- Camshaft Identification (Bank 2):
- Disassembling and Assembling Control Housing:
- Valve Seats, Refacing
- Camshaft Adjuster Valves, Removing and Installing
- Camshafts, Removing and Installing
- Valve Guides, Checking
- Valve Stem Seals, Removing and Installing
- 17 - Engine - Lubrication
- Lubrication System Components
- Lubrication System Components
- Engine Oil Specifications
- Engine Oil Capacities
- Engine Oil Level, Checking
- Oil Pan, Engine Code BAP, Assembly Overview
- Oil Pan, Engine Code BRP, Assembly Overview
- Oil Pan, Lower Section, Removing and Installing
- Oil Pan, Upper Section, Removing and Installing
- Oil Pump, Assembly Overview
- Oil Pump, Removing and Installing
- Oil Filter Housing, Engine Code BAP, Assembly Overview
- Oil Filter Housing, Engine Code BRP, Assembly Overview
- Oil Pressure and Oil Pressure Switch, Checking
- Lubrication System Components
- 19 - Engine - Cooling System
- Cooling System Components
- Cooling System Components
- Radiator, Assembly Overview
- Fan, Assembly Overview
- Cooling System, Body Side, Overview
- Cooling System, Upper Engine, Overview
- Cooling System, Engine Rear and Side, Overview
- Cooling System, Engine Front, Overview
- Coolant Hose Connection Diagram
- Cooling System, Draining and Filling
- Radiator, Removing and Installing
- Coolant Pump, Removing and Installing
- Cooling System, Checking for Coolant Leaks
- Cooling System Components
- 20 - Fuel Supply
- Fuel Supply System Components
- Fuel Supply System Components
- Fuel Supply System, Safety Precautions
- Clean Working Conditions
- Fuel Tank with Fuel Filter, Assembly Overview
- Fuel Delivery Unit, Fuel Level Sensor and Suction Jet Pump, Right Side, Assembly Overview
- Fuel Delivery Unit, Fuel Level Sensor and Suction Jet Pump, Left Side, Assembly Overview
- Fuel Lines and Fuel Tank Components, Connection Diagram
- Fuel Tank, Draining
- Fuel Delivery Unit, Fuel Level Sensor and Suction Jet Pump, Right Side, Removing and Installing
- Fuel Delivery Unit, Fuel Level Sensor and Suction Jet Pump, Left Side, Removing and Installing
- Fuel Tank with Attachments and Fuel Filter, Removing and Installing
- Fuel Pumps, Checking
- Electronic Engine Power Control
- EVAP System
- Fuel Supply System Components
- 24 - Multiport Fuel Injection (MFI)
- Fuel Injection System
- Fuel Injection System
- Safety Precautions
- Clean Working Conditions
- General Information
- Technical Data
- Intake Manifold, Engine Code BAP, Assembly Overview
- Intake Manifold Upper Section, Engine Code BRP, Assembly Overview
- Intake Manifold Lower Section, Engine Code BRP, Assembly Overview
- Fuel Rail with Fuel Injectors, Assembly Overview
- Air Filter, Assembly Overview
- Oxygen Sensors
- Components, Checking
- Engine Control Module
- Fuel Injection System
- 26 - Exhaust system, Emission controls
- Exhaust System Components
- Exhaust System Components
- Exhaust Manifold with Primary Catalytic Converters and Bank 1 Attachments, Assembly Overview
- Exhaust Manifold with Primary Catalytic Converters and Bank 2 Attachments, Assembly Overview
- Primary Catalytic Converters with Exhaust Pipes, Aligning
- Muffler with Mounts, Assembly Overview
- Secondary Air Injection System
- Exhaust System Components
- 28 - Ignition/Glow Plug System
- 6.0L 12-CYL 4V Generic Scan Tool [BRP, Bap] - (20-Fuel Pump, Fuel Supply, Evaporative Emissions - 38-Automatic Transmission-Gears, Hydraulic Controls, Valve Body)
- 20 - Fuel Pump, Fuel Supply, Evaporative Emissions
- Fuel supply system, components
- Fuel supply system, components
- Working on fuel supply, safety precautions
- Rules of cleanliness
- Fuel tank with attachments and fuel filter - assembly overview
- Fuel delivery unit, sensor for fuel gauge and suction jet pump (right side), assembly overview
- Fuel delivery unit, sensor for fuel gauge and suction jet pump (left side), assembly overview
- Connection diagram for fuel lines and fuel tank components
- Empty fuel tank
- Fuel Pump (FP) unit, sender for fuel gauge and suction jet pump (right side), removing and installing
- Fuel Pump (FP) unit, sender for fuel gauge and suction jet pump (left side), removing and installing
- Fuel pumps, checking
- Notes
- Check function and voltage supply of fuel pumps
- Transfer Fuel Pump (FP) G23, test sequence
- Fuel Pump (FP) G6, test sequence
- Fuel Pump (FP), checking delivery quantity
- Flow quantity of Transfer Fuel Pump (FP) G23, checking
- Flow quantity of Fuel Pump (FP) G6, checking
- Current pick-up of Fuel Pumps (FP), checking
- Check-valves of Fuel Pumps (FP), checking
- Check-valve of Transfer Fuel Pump (FP) G23, checking
- Check-valve of Fuel Pump (FP) G6, checking
- EVAP canister system
- Electronic engine power control (EPC)
- Fuel supply system, components
- 24 - Multiport Fuel Injection (MFI)
- Fuel injection system, servicing
- Fuel injection system, servicing
- Fuel Injection system, general notes
- Safety precautions
- Rules of cleanliness
- Intake manifold, assembly overview (vehicles with engine code BAP)
- Upper section of intake manifold, assembly overview (vehicles with engine code BRP)
- Lower section of intake manifold, assembly overview (vehicles with engine code BRP)
- Fuel rail with fuel injectors - assembly overview
- Air filter - assembly overview
- Technical data
- Components of engine, checking
- Components of engine, checking
- Check oxygen sensor heater for oxygen sensors before catalytic converter
- Checking voltage supply and wiring to control module
- Ground (GND) activation of oxygen sensor heating, checking
- Oxygen sensor heater for oxygen sensors behind Three Way Catalytic Converter (TWC), checking
- Voltage supply and wiring to control module, checking
- Checking Ground (GND) activation of oxygen sensor heating
- Mass Air Flow (MAF) sensor, checking
- Voltage supply of Mass Air Flow (MAF) sensors, checking
- Checking signal and Ground wires of Mass Air Flow (MAF) Sensors
- Throttle valve control modules, checking
- Checking wires to Engine Control Module (ECM)
- Coolant temperature sensor, checking
- Intake Air Temperature (IAT) sensor, checking
- Engine Control Module (ECM), checking wires to
- Engine Coolant Temperature (ECT) Sensor (on Radiator), checking
- Thermostat for characteristic map controlled engine cooling
- Coolant FC (Fan Control) Control Modules, checking
- Engine Speed (RPM) sensor, checking
- Fuel injectors, checking
- Resistance values of fuel injectors, checking
- Voltage supply, checking
- Activation and voltage supply, checking
- Injection quantity and proper seal of fuel injectors, checking
- Injection quantity, checking
- Fuel pressure regulator and residual pressure, checking
- Intake system, checking for leaks (false air)
- Function tests
- Engine Control Modules (ECM)
- Additional signals, checking
- Fuel injection system, servicing
- 26 - Exhaust System, Emission Controls
- Exhaust system
- Exhaust system
- Exhaust System, general notes
- Exhaust manifold with primary catalytic converters and attachments cylinder bank 1, assembly overview
- Exhaust manifold with primary catalytic converters and attachments cylinder bank 2, assembly overview
- Primary catalytic converters with exhaust pipes, aligning
- Catalytic converter with muffler and attachments, assembly overview
- Three Way Catalytic Converters (TWC), checking
- Secondary air system
- Secondary air system
- Secondary Air Injection (AIR) system, general notes
- Secondary Air Injection (AIR) system, function
- Secondary Air Injection (AIR) system on body side - assembly overview
- Secondary Air Injection (AIR) system on engine side - assembly overview
- Secondary Air Injection (AIR) system, checking for proper seal
- Secondary Air Injection (AIR) pump motors, checking
- Secondary Air Injection (AIR) valves, checking (vehicles with engine code BAP)
- Engine Control Module (ECM), checking wires to
- Combination valves, checking (vehicles with engine code BAP)
- Exhaust system
- 28 - Ignition system
- Ignition, servicing
- Ignition, servicing
- Ignition System, general notes
- Safety precautions
- Rules of cleanliness
- Ignition - assembly overview
- Test Data, Spark Plugs
- Ignition coils with power output stage, removing and installing
- Ignition coils with power output stages, checking
- Engine Control Module (ECM), checking wires to
- Camshaft Position (CMP) sensor, checking
- Checking wires to Engine Control Module (ECM)
- Check knock sensors
- Check camshaft adjustment valves
- Ignition, servicing
- 38 - Automatic Transmission - Gears, Hydraulic Controls, Valve Body
- Electrical components for regulating transmission, checking
- Electrical components for regulating transmission, checking
- Safety precautions when working on transmission
- Rules of cleanliness
- Multi-Function Transmission Range (TR) Switch, replacing
- Multi-Function Transmission Range (TR) Switch, checking
- Sensor for transmission RPM, checking
- Transmission Output RPM, checking
- Transmission Fluid Temperature Sensor, checking
- Solenoid valves in valve body, checking
- Pressure regulator valves in valve body, checking
- Transmission Control Module (TCM)
- Electrical components for regulating transmission, checking
- 20 - Fuel Pump, Fuel Supply, Evaporative Emissions
- 6.0L 12-CYL 4V Engine Mechanical, Fuel Injection & Ignition, Engine Code(S): BRP, Bap
- Mode 6 - Phaeton
- Specifications
- System
- 6.0L 12-CYL 4V Engine Mechanical, Fuel Injection & Ignition, Engine Code(S): BRP, Bap
- 00 - General, Technical Data
- 10 - Engine - Assembly
- 13 - Engine - Crankshaft, Cylinder Block
- 15 - Engine - Cylinder head, Valvetrain
- Cylinder Heads
- Chain Drive
- Valvetrain
- Valvetrain
- Valvetrain, Assembly Overview
- Valvetrain, Assembly Overview
- Camshafts, Checking Axial Play
- Before installing, lightly coat contact surface of bearing caps using grease G 052 723 A2
- Installation Position Camshaft Bearing Caps, Cylinder Bank 1
- Installation Position Camshaft Bearing Caps, Bank 2:
- Valve Dimensions:
- Camshaft Identification (Bank 1):
- Camshaft Identification (Bank 2):
- Disassembling and Assembling Control Housing:
- Valve Seats, Refacing
- Camshaft Adjuster Valves, Removing and Installing
- Camshafts, Removing and Installing
- Valve Guides, Checking
- Valve Stem Seals, Removing and Installing
- 17 - Engine - Lubrication
- Lubrication System Components
- Lubrication System Components
- Engine Oil Specifications
- Engine Oil Capacities
- Engine Oil Level, Checking
- Oil Pan, Engine Code BAP, Assembly Overview
- Oil Pan, Engine Code BRP, Assembly Overview
- Oil Pan, Lower Section, Removing and Installing
- Oil Pan, Upper Section, Removing and Installing
- Oil Pump, Assembly Overview
- Oil Pump, Removing and Installing
- Oil Filter Housing, Engine Code BAP, Assembly Overview
- Oil Filter Housing, Engine Code BRP, Assembly Overview
- Oil Pressure and Oil Pressure Switch, Checking
- Lubrication System Components
- 19 - Engine - Cooling System
- Cooling System Components
- Cooling System Components
- Radiator, Assembly Overview
- Fan, Assembly Overview
- Cooling System, Body Side, Overview
- Cooling System, Upper Engine, Overview
- Cooling System, Engine Rear and Side, Overview
- Cooling System, Engine Front, Overview
- Coolant Hose Connection Diagram
- Cooling System, Draining and Filling
- Radiator, Removing and Installing
- Coolant Pump, Removing and Installing
- Cooling System, Checking for Coolant Leaks
- Cooling System Components
- 20 - Fuel Supply
- Fuel Supply System Components
- Fuel Supply System Components
- Fuel Supply System, Safety Precautions
- Clean Working Conditions
- Fuel Tank with Fuel Filter, Assembly Overview
- Fuel Delivery Unit, Fuel Level Sensor and Suction Jet Pump, Right Side, Assembly Overview
- Fuel Delivery Unit, Fuel Level Sensor and Suction Jet Pump, Left Side, Assembly Overview
- Fuel Lines and Fuel Tank Components, Connection Diagram
- Fuel Tank, Draining
- Fuel Delivery Unit, Fuel Level Sensor and Suction Jet Pump, Right Side, Removing and Installing
- Fuel Delivery Unit, Fuel Level Sensor and Suction Jet Pump, Left Side, Removing and Installing
- Fuel Tank with Attachments and Fuel Filter, Removing and Installing
- Fuel Pumps, Checking
- Electronic Engine Power Control
- EVAP System
- Fuel Supply System Components
- 24 - Multiport Fuel Injection (MFI)
- Fuel Injection System
- Fuel Injection System
- Safety Precautions
- Clean Working Conditions
- General Information
- Technical Data
- Intake Manifold, Engine Code BAP, Assembly Overview
- Intake Manifold Upper Section, Engine Code BRP, Assembly Overview
- Intake Manifold Lower Section, Engine Code BRP, Assembly Overview
- Fuel Rail with Fuel Injectors, Assembly Overview
- Air Filter, Assembly Overview
- Oxygen Sensors
- Components, Checking
- Engine Control Module
- Fuel Injection System
- 26 - Exhaust system, Emission controls
- Exhaust System Components
- Exhaust System Components
- Exhaust Manifold with Primary Catalytic Converters and Bank 1 Attachments, Assembly Overview
- Exhaust Manifold with Primary Catalytic Converters and Bank 2 Attachments, Assembly Overview
- Primary Catalytic Converters with Exhaust Pipes, Aligning
- Muffler with Mounts, Assembly Overview
- Secondary Air Injection System
- Exhaust System Components
- 28 - Ignition/Glow Plug System
- 6.0L 12-CYL 4V Generic Scan Tool [BRP, Bap] - (20-Fuel Pump, Fuel Supply, Evaporative Emissions - 38-Automatic Transmission-Gears, Hydraulic Controls, Valve Body)
- 20 - Fuel Pump, Fuel Supply, Evaporative Emissions
- Fuel supply system, components
- Fuel supply system, components
- Working on fuel supply, safety precautions
- Rules of cleanliness
- Fuel tank with attachments and fuel filter - assembly overview
- Fuel delivery unit, sensor for fuel gauge and suction jet pump (right side), assembly overview
- Fuel delivery unit, sensor for fuel gauge and suction jet pump (left side), assembly overview
- Connection diagram for fuel lines and fuel tank components
- Empty fuel tank
- Fuel Pump (FP) unit, sender for fuel gauge and suction jet pump (right side), removing and installing
- Fuel Pump (FP) unit, sender for fuel gauge and suction jet pump (left side), removing and installing
- Fuel pumps, checking
- Notes
- Check function and voltage supply of fuel pumps
- Transfer Fuel Pump (FP) G23, test sequence
- Fuel Pump (FP) G6, test sequence
- Fuel Pump (FP), checking delivery quantity
- Flow quantity of Transfer Fuel Pump (FP) G23, checking
- Flow quantity of Fuel Pump (FP) G6, checking
- Current pick-up of Fuel Pumps (FP), checking
- Check-valves of Fuel Pumps (FP), checking
- Check-valve of Transfer Fuel Pump (FP) G23, checking
- Check-valve of Fuel Pump (FP) G6, checking
- EVAP canister system
- Electronic engine power control (EPC)
- Fuel supply system, components
- 24 - Multiport Fuel Injection (MFI)
- Fuel injection system, servicing
- Fuel injection system, servicing
- Fuel Injection system, general notes
- Safety precautions
- Rules of cleanliness
- Intake manifold, assembly overview (vehicles with engine code BAP)
- Upper section of intake manifold, assembly overview (vehicles with engine code BRP)
- Lower section of intake manifold, assembly overview (vehicles with engine code BRP)
- Fuel rail with fuel injectors - assembly overview
- Air filter - assembly overview
- Technical data
- Components of engine, checking
- Components of engine, checking
- Check oxygen sensor heater for oxygen sensors before catalytic converter
- Checking voltage supply and wiring to control module
- Ground (GND) activation of oxygen sensor heating, checking
- Oxygen sensor heater for oxygen sensors behind Three Way Catalytic Converter (TWC), checking
- Voltage supply and wiring to control module, checking
- Checking Ground (GND) activation of oxygen sensor heating
- Mass Air Flow (MAF) sensor, checking
- Voltage supply of Mass Air Flow (MAF) sensors, checking
- Checking signal and Ground wires of Mass Air Flow (MAF) Sensors
- Throttle valve control modules, checking
- Checking wires to Engine Control Module (ECM)
- Coolant temperature sensor, checking
- Intake Air Temperature (IAT) sensor, checking
- Engine Control Module (ECM), checking wires to
- Engine Coolant Temperature (ECT) Sensor (on Radiator), checking
- Thermostat for characteristic map controlled engine cooling
- Coolant FC (Fan Control) Control Modules, checking
- Engine Speed (RPM) sensor, checking
- Fuel injectors, checking
- Resistance values of fuel injectors, checking
- Voltage supply, checking
- Activation and voltage supply, checking
- Injection quantity and proper seal of fuel injectors, checking
- Injection quantity, checking
- Fuel pressure regulator and residual pressure, checking
- Intake system, checking for leaks (false air)
- Function tests
- Engine Control Modules (ECM)
- Additional signals, checking
- Fuel injection system, servicing
- 26 - Exhaust System, Emission Controls
- Exhaust system
- Exhaust system
- Exhaust System, general notes
- Exhaust manifold with primary catalytic converters and attachments cylinder bank 1, assembly overview
- Exhaust manifold with primary catalytic converters and attachments cylinder bank 2, assembly overview
- Primary catalytic converters with exhaust pipes, aligning
- Catalytic converter with muffler and attachments, assembly overview
- Three Way Catalytic Converters (TWC), checking
- Secondary air system
- Secondary air system
- Secondary Air Injection (AIR) system, general notes
- Secondary Air Injection (AIR) system, function
- Secondary Air Injection (AIR) system on body side - assembly overview
- Secondary Air Injection (AIR) system on engine side - assembly overview
- Secondary Air Injection (AIR) system, checking for proper seal
- Secondary Air Injection (AIR) pump motors, checking
- Secondary Air Injection (AIR) valves, checking (vehicles with engine code BAP)
- Engine Control Module (ECM), checking wires to
- Combination valves, checking (vehicles with engine code BAP)
- Exhaust system
- 28 - Ignition system
- Ignition, servicing
- Ignition, servicing
- Ignition System, general notes
- Safety precautions
- Rules of cleanliness
- Ignition - assembly overview
- Test Data, Spark Plugs
- Ignition coils with power output stage, removing and installing
- Ignition coils with power output stages, checking
- Engine Control Module (ECM), checking wires to
- Camshaft Position (CMP) sensor, checking
- Checking wires to Engine Control Module (ECM)
- Check knock sensors
- Check camshaft adjustment valves
- Ignition, servicing
- 38 - Automatic Transmission - Gears, Hydraulic Controls, Valve Body
- Electrical components for regulating transmission, checking
- Electrical components for regulating transmission, checking
- Safety precautions when working on transmission
- Rules of cleanliness
- Multi-Function Transmission Range (TR) Switch, replacing
- Multi-Function Transmission Range (TR) Switch, checking
- Sensor for transmission RPM, checking
- Transmission Output RPM, checking
- Transmission Fluid Temperature Sensor, checking
- Solenoid valves in valve body, checking
- Pressure regulator valves in valve body, checking
- Transmission Control Module (TCM)
- Electrical components for regulating transmission, checking
- 20 - Fuel Pump, Fuel Supply, Evaporative Emissions
- 6.0L 12-CYL 4V Generic Scan Tool [BRP, Bap] - 01-On Board Diagnostic
- 01 - On Board Diagnostic (OBD)
- General information for On Board Diagnostic (OBD)
- General information for On Board Diagnostic (OBD)
- Characteristics of On Board Diagnostic (OBD)
- On Board Diagnostic (OBD), technical data
- Diagnostic tester, connecting
- Test box, connecting for wiring test
- Connecting test box to wiring harness of Engine Control Modules (ECM)
- Connecting test box to Transmission Control Module (TCM)
- Diagnostic mode, selecting
- Diagnostic mode, selecting
- Recommended special tools and equipment e.g.:
- Address word 33 - On-Board Diagnostic (OBD)
- Diagnostic mode 1: Check measured values
- Diagnostic mode 2: Check operating conditions
- Diagnostic mode 3: Check DTC Memory
- Diagnostic mode 4: Reset/erase diagnostic data
- Diagnostic mode 5: Check lambda test results
- Diagnostic mode 6: Check test results of components that are not continuously monitored
- Notes
- Test-ID 1 ($1): Catalytic converter monitoring
- Test-ID 2 ($2): Oxygen sensor monitoring (vehicles with engine code BRP)
- Test-ID 3 ($3): Secondary air system
- Test-ID 5 ($5): Tank ventilation system
- Test-ID 6 ($6): Oxygen sensor heater monitoring (vehicles with engine code BRP)
- Test-ID 9 ($9): Engine Coolant Temperature (ECT) Sensor G62 (vehicles with engine code BAP)
- Diagnostic mode 7: Check test results of components that are continuously monitored
- Diagnostic mode 8: Tank leak test
- Diagnostic mode 9: Vehicle information
- Readiness code
- DTC tables
- General information for On Board Diagnostic (OBD)
- 01 - On Board Diagnostic (OBD)
- 6.0L 12-CYL 4V Engine Mechanical, Fuel Injection & Ignition, Engine Code(S): BRP, Bap
- Testing & Diagnosis
- 6.0L 12-CYL 4V Engine Mechanical, Fuel Injection & Ignition, Engine Code(S): BRP, Bap
- 00 - General, Technical Data
- 10 - Engine - Assembly
- 13 - Engine - Crankshaft, Cylinder Block
- 15 - Engine - Cylinder head, Valvetrain
- Cylinder Heads
- Chain Drive
- Valvetrain
- Valvetrain
- Valvetrain, Assembly Overview
- Valvetrain, Assembly Overview
- Camshafts, Checking Axial Play
- Before installing, lightly coat contact surface of bearing caps using grease G 052 723 A2
- Installation Position Camshaft Bearing Caps, Cylinder Bank 1
- Installation Position Camshaft Bearing Caps, Bank 2:
- Valve Dimensions:
- Camshaft Identification (Bank 1):
- Camshaft Identification (Bank 2):
- Disassembling and Assembling Control Housing:
- Valve Seats, Refacing
- Camshaft Adjuster Valves, Removing and Installing
- Camshafts, Removing and Installing
- Valve Guides, Checking
- Valve Stem Seals, Removing and Installing
- 17 - Engine - Lubrication
- Lubrication System Components
- Lubrication System Components
- Engine Oil Specifications
- Engine Oil Capacities
- Engine Oil Level, Checking
- Oil Pan, Engine Code BAP, Assembly Overview
- Oil Pan, Engine Code BRP, Assembly Overview
- Oil Pan, Lower Section, Removing and Installing
- Oil Pan, Upper Section, Removing and Installing
- Oil Pump, Assembly Overview
- Oil Pump, Removing and Installing
- Oil Filter Housing, Engine Code BAP, Assembly Overview
- Oil Filter Housing, Engine Code BRP, Assembly Overview
- Oil Pressure and Oil Pressure Switch, Checking
- Lubrication System Components
- 19 - Engine - Cooling System
- Cooling System Components
- Cooling System Components
- Radiator, Assembly Overview
- Fan, Assembly Overview
- Cooling System, Body Side, Overview
- Cooling System, Upper Engine, Overview
- Cooling System, Engine Rear and Side, Overview
- Cooling System, Engine Front, Overview
- Coolant Hose Connection Diagram
- Cooling System, Draining and Filling
- Radiator, Removing and Installing
- Coolant Pump, Removing and Installing
- Cooling System, Checking for Coolant Leaks
- Cooling System Components
- 20 - Fuel Supply
- Fuel Supply System Components
- Fuel Supply System Components
- Fuel Supply System, Safety Precautions
- Clean Working Conditions
- Fuel Tank with Fuel Filter, Assembly Overview
- Fuel Delivery Unit, Fuel Level Sensor and Suction Jet Pump, Right Side, Assembly Overview
- Fuel Delivery Unit, Fuel Level Sensor and Suction Jet Pump, Left Side, Assembly Overview
- Fuel Lines and Fuel Tank Components, Connection Diagram
- Fuel Tank, Draining
- Fuel Delivery Unit, Fuel Level Sensor and Suction Jet Pump, Right Side, Removing and Installing
- Fuel Delivery Unit, Fuel Level Sensor and Suction Jet Pump, Left Side, Removing and Installing
- Fuel Tank with Attachments and Fuel Filter, Removing and Installing
- Fuel Pumps, Checking
- Electronic Engine Power Control
- EVAP System
- Fuel Supply System Components
- 24 - Multiport Fuel Injection (MFI)
- Fuel Injection System
- Fuel Injection System
- Safety Precautions
- Clean Working Conditions
- General Information
- Technical Data
- Intake Manifold, Engine Code BAP, Assembly Overview
- Intake Manifold Upper Section, Engine Code BRP, Assembly Overview
- Intake Manifold Lower Section, Engine Code BRP, Assembly Overview
- Fuel Rail with Fuel Injectors, Assembly Overview
- Air Filter, Assembly Overview
- Oxygen Sensors
- Components, Checking
- Engine Control Module
- Fuel Injection System
- 26 - Exhaust system, Emission controls
- Exhaust System Components
- Exhaust System Components
- Exhaust Manifold with Primary Catalytic Converters and Bank 1 Attachments, Assembly Overview
- Exhaust Manifold with Primary Catalytic Converters and Bank 2 Attachments, Assembly Overview
- Primary Catalytic Converters with Exhaust Pipes, Aligning
- Muffler with Mounts, Assembly Overview
- Secondary Air Injection System
- Exhaust System Components
- 28 - Ignition/Glow Plug System
- 6.0L 12-CYL 4V Generic Scan Tool [BRP, Bap] - (20-Fuel Pump, Fuel Supply, Evaporative Emissions - 38-Automatic Transmission-Gears, Hydraulic Controls, Valve Body)
- 20 - Fuel Pump, Fuel Supply, Evaporative Emissions
- Fuel supply system, components
- Fuel supply system, components
- Working on fuel supply, safety precautions
- Rules of cleanliness
- Fuel tank with attachments and fuel filter - assembly overview
- Fuel delivery unit, sensor for fuel gauge and suction jet pump (right side), assembly overview
- Fuel delivery unit, sensor for fuel gauge and suction jet pump (left side), assembly overview
- Connection diagram for fuel lines and fuel tank components
- Empty fuel tank
- Fuel Pump (FP) unit, sender for fuel gauge and suction jet pump (right side), removing and installing
- Fuel Pump (FP) unit, sender for fuel gauge and suction jet pump (left side), removing and installing
- Fuel pumps, checking
- Notes
- Check function and voltage supply of fuel pumps
- Transfer Fuel Pump (FP) G23, test sequence
- Fuel Pump (FP) G6, test sequence
- Fuel Pump (FP), checking delivery quantity
- Flow quantity of Transfer Fuel Pump (FP) G23, checking
- Flow quantity of Fuel Pump (FP) G6, checking
- Current pick-up of Fuel Pumps (FP), checking
- Check-valves of Fuel Pumps (FP), checking
- Check-valve of Transfer Fuel Pump (FP) G23, checking
- Check-valve of Fuel Pump (FP) G6, checking
- EVAP canister system
- Electronic engine power control (EPC)
- Fuel supply system, components
- 24 - Multiport Fuel Injection (MFI)
- Fuel injection system, servicing
- Fuel injection system, servicing
- Fuel Injection system, general notes
- Safety precautions
- Rules of cleanliness
- Intake manifold, assembly overview (vehicles with engine code BAP)
- Upper section of intake manifold, assembly overview (vehicles with engine code BRP)
- Lower section of intake manifold, assembly overview (vehicles with engine code BRP)
- Fuel rail with fuel injectors - assembly overview
- Air filter - assembly overview
- Technical data
- Components of engine, checking
- Components of engine, checking
- Check oxygen sensor heater for oxygen sensors before catalytic converter
- Checking voltage supply and wiring to control module
- Ground (GND) activation of oxygen sensor heating, checking
- Oxygen sensor heater for oxygen sensors behind Three Way Catalytic Converter (TWC), checking
- Voltage supply and wiring to control module, checking
- Checking Ground (GND) activation of oxygen sensor heating
- Mass Air Flow (MAF) sensor, checking
- Voltage supply of Mass Air Flow (MAF) sensors, checking
- Checking signal and Ground wires of Mass Air Flow (MAF) Sensors
- Throttle valve control modules, checking
- Checking wires to Engine Control Module (ECM)
- Coolant temperature sensor, checking
- Intake Air Temperature (IAT) sensor, checking
- Engine Control Module (ECM), checking wires to
- Engine Coolant Temperature (ECT) Sensor (on Radiator), checking
- Thermostat for characteristic map controlled engine cooling
- Coolant FC (Fan Control) Control Modules, checking
- Engine Speed (RPM) sensor, checking
- Fuel injectors, checking
- Resistance values of fuel injectors, checking
- Voltage supply, checking
- Activation and voltage supply, checking
- Injection quantity and proper seal of fuel injectors, checking
- Injection quantity, checking
- Fuel pressure regulator and residual pressure, checking
- Intake system, checking for leaks (false air)
- Function tests
- Engine Control Modules (ECM)
- Additional signals, checking
- Fuel injection system, servicing
- 26 - Exhaust System, Emission Controls
- Exhaust system
- Exhaust system
- Exhaust System, general notes
- Exhaust manifold with primary catalytic converters and attachments cylinder bank 1, assembly overview
- Exhaust manifold with primary catalytic converters and attachments cylinder bank 2, assembly overview
- Primary catalytic converters with exhaust pipes, aligning
- Catalytic converter with muffler and attachments, assembly overview
- Three Way Catalytic Converters (TWC), checking
- Secondary air system
- Secondary air system
- Secondary Air Injection (AIR) system, general notes
- Secondary Air Injection (AIR) system, function
- Secondary Air Injection (AIR) system on body side - assembly overview
- Secondary Air Injection (AIR) system on engine side - assembly overview
- Secondary Air Injection (AIR) system, checking for proper seal
- Secondary Air Injection (AIR) pump motors, checking
- Secondary Air Injection (AIR) valves, checking (vehicles with engine code BAP)
- Engine Control Module (ECM), checking wires to
- Combination valves, checking (vehicles with engine code BAP)
- Exhaust system
- 28 - Ignition system
- Ignition, servicing
- Ignition, servicing
- Ignition System, general notes
- Safety precautions
- Rules of cleanliness
- Ignition - assembly overview
- Test Data, Spark Plugs
- Ignition coils with power output stage, removing and installing
- Ignition coils with power output stages, checking
- Engine Control Module (ECM), checking wires to
- Camshaft Position (CMP) sensor, checking
- Checking wires to Engine Control Module (ECM)
- Check knock sensors
- Check camshaft adjustment valves
- Ignition, servicing
- 38 - Automatic Transmission - Gears, Hydraulic Controls, Valve Body
- Electrical components for regulating transmission, checking
- Electrical components for regulating transmission, checking
- Safety precautions when working on transmission
- Rules of cleanliness
- Multi-Function Transmission Range (TR) Switch, replacing
- Multi-Function Transmission Range (TR) Switch, checking
- Sensor for transmission RPM, checking
- Transmission Output RPM, checking
- Transmission Fluid Temperature Sensor, checking
- Solenoid valves in valve body, checking
- Pressure regulator valves in valve body, checking
- Transmission Control Module (TCM)
- Electrical components for regulating transmission, checking
- 20 - Fuel Pump, Fuel Supply, Evaporative Emissions
- 6.0L 12-CYL 4V Generic Scan Tool [BRP, Bap] - 01-On Board Diagnostic
- 01 - On Board Diagnostic (OBD)
- General information for On Board Diagnostic (OBD)
- General information for On Board Diagnostic (OBD)
- Characteristics of On Board Diagnostic (OBD)
- On Board Diagnostic (OBD), technical data
- Diagnostic tester, connecting
- Test box, connecting for wiring test
- Connecting test box to wiring harness of Engine Control Modules (ECM)
- Connecting test box to Transmission Control Module (TCM)
- Diagnostic mode, selecting
- Diagnostic mode, selecting
- Recommended special tools and equipment e.g.:
- Address word 33 - On-Board Diagnostic (OBD)
- Diagnostic mode 1: Check measured values
- Diagnostic mode 2: Check operating conditions
- Diagnostic mode 3: Check DTC Memory
- Diagnostic mode 4: Reset/erase diagnostic data
- Diagnostic mode 5: Check lambda test results
- Diagnostic mode 6: Check test results of components that are not continuously monitored
- Notes
- Test-ID 1 ($1): Catalytic converter monitoring
- Test-ID 2 ($2): Oxygen sensor monitoring (vehicles with engine code BRP)
- Test-ID 3 ($3): Secondary air system
- Test-ID 5 ($5): Tank ventilation system
- Test-ID 6 ($6): Oxygen sensor heater monitoring (vehicles with engine code BRP)
- Test-ID 9 ($9): Engine Coolant Temperature (ECT) Sensor G62 (vehicles with engine code BAP)
- Diagnostic mode 7: Check test results of components that are continuously monitored
- Diagnostic mode 8: Tank leak test
- Diagnostic mode 9: Vehicle information
- Readiness code
- DTC tables
- General information for On Board Diagnostic (OBD)
- 01 - On Board Diagnostic (OBD)
- 6.0L 12-CYL 4V Engine Mechanical, Fuel Injection & Ignition, Engine Code(S): BRP, Bap
- Tune-Up
- 6.0L 12-CYL 4V Engine Mechanical, Fuel Injection & Ignition, Engine Code(S): BRP, Bap
- 00 - General, Technical Data
- 10 - Engine - Assembly
- 13 - Engine - Crankshaft, Cylinder Block
- 15 - Engine - Cylinder head, Valvetrain
- Cylinder Heads
- Chain Drive
- Valvetrain
- Valvetrain
- Valvetrain, Assembly Overview
- Valvetrain, Assembly Overview
- Camshafts, Checking Axial Play
- Before installing, lightly coat contact surface of bearing caps using grease G 052 723 A2
- Installation Position Camshaft Bearing Caps, Cylinder Bank 1
- Installation Position Camshaft Bearing Caps, Bank 2:
- Valve Dimensions:
- Camshaft Identification (Bank 1):
- Camshaft Identification (Bank 2):
- Disassembling and Assembling Control Housing:
- Valve Seats, Refacing
- Camshaft Adjuster Valves, Removing and Installing
- Camshafts, Removing and Installing
- Valve Guides, Checking
- Valve Stem Seals, Removing and Installing
- 17 - Engine - Lubrication
- Lubrication System Components
- Lubrication System Components
- Engine Oil Specifications
- Engine Oil Capacities
- Engine Oil Level, Checking
- Oil Pan, Engine Code BAP, Assembly Overview
- Oil Pan, Engine Code BRP, Assembly Overview
- Oil Pan, Lower Section, Removing and Installing
- Oil Pan, Upper Section, Removing and Installing
- Oil Pump, Assembly Overview
- Oil Pump, Removing and Installing
- Oil Filter Housing, Engine Code BAP, Assembly Overview
- Oil Filter Housing, Engine Code BRP, Assembly Overview
- Oil Pressure and Oil Pressure Switch, Checking
- Lubrication System Components
- 19 - Engine - Cooling System
- Cooling System Components
- Cooling System Components
- Radiator, Assembly Overview
- Fan, Assembly Overview
- Cooling System, Body Side, Overview
- Cooling System, Upper Engine, Overview
- Cooling System, Engine Rear and Side, Overview
- Cooling System, Engine Front, Overview
- Coolant Hose Connection Diagram
- Cooling System, Draining and Filling
- Radiator, Removing and Installing
- Coolant Pump, Removing and Installing
- Cooling System, Checking for Coolant Leaks
- Cooling System Components
- 20 - Fuel Supply
- Fuel Supply System Components
- Fuel Supply System Components
- Fuel Supply System, Safety Precautions
- Clean Working Conditions
- Fuel Tank with Fuel Filter, Assembly Overview
- Fuel Delivery Unit, Fuel Level Sensor and Suction Jet Pump, Right Side, Assembly Overview
- Fuel Delivery Unit, Fuel Level Sensor and Suction Jet Pump, Left Side, Assembly Overview
- Fuel Lines and Fuel Tank Components, Connection Diagram
- Fuel Tank, Draining
- Fuel Delivery Unit, Fuel Level Sensor and Suction Jet Pump, Right Side, Removing and Installing
- Fuel Delivery Unit, Fuel Level Sensor and Suction Jet Pump, Left Side, Removing and Installing
- Fuel Tank with Attachments and Fuel Filter, Removing and Installing
- Fuel Pumps, Checking
- Electronic Engine Power Control
- EVAP System
- Fuel Supply System Components
- 24 - Multiport Fuel Injection (MFI)
- Fuel Injection System
- Fuel Injection System
- Safety Precautions
- Clean Working Conditions
- General Information
- Technical Data
- Intake Manifold, Engine Code BAP, Assembly Overview
- Intake Manifold Upper Section, Engine Code BRP, Assembly Overview
- Intake Manifold Lower Section, Engine Code BRP, Assembly Overview
- Fuel Rail with Fuel Injectors, Assembly Overview
- Air Filter, Assembly Overview
- Oxygen Sensors
- Components, Checking
- Engine Control Module
- Fuel Injection System
- 26 - Exhaust system, Emission controls
- Exhaust System Components
- Exhaust System Components
- Exhaust Manifold with Primary Catalytic Converters and Bank 1 Attachments, Assembly Overview
- Exhaust Manifold with Primary Catalytic Converters and Bank 2 Attachments, Assembly Overview
- Primary Catalytic Converters with Exhaust Pipes, Aligning
- Muffler with Mounts, Assembly Overview
- Secondary Air Injection System
- Exhaust System Components
- 28 - Ignition/Glow Plug System
- 6.0L 12-CYL 4V Generic Scan Tool [BRP, Bap] - (20-Fuel Pump, Fuel Supply, Evaporative Emissions - 38-Automatic Transmission-Gears, Hydraulic Controls, Valve Body)
- 20 - Fuel Pump, Fuel Supply, Evaporative Emissions
- Fuel supply system, components
- Fuel supply system, components
- Working on fuel supply, safety precautions
- Rules of cleanliness
- Fuel tank with attachments and fuel filter - assembly overview
- Fuel delivery unit, sensor for fuel gauge and suction jet pump (right side), assembly overview
- Fuel delivery unit, sensor for fuel gauge and suction jet pump (left side), assembly overview
- Connection diagram for fuel lines and fuel tank components
- Empty fuel tank
- Fuel Pump (FP) unit, sender for fuel gauge and suction jet pump (right side), removing and installing
- Fuel Pump (FP) unit, sender for fuel gauge and suction jet pump (left side), removing and installing
- Fuel pumps, checking
- Notes
- Check function and voltage supply of fuel pumps
- Transfer Fuel Pump (FP) G23, test sequence
- Fuel Pump (FP) G6, test sequence
- Fuel Pump (FP), checking delivery quantity
- Flow quantity of Transfer Fuel Pump (FP) G23, checking
- Flow quantity of Fuel Pump (FP) G6, checking
- Current pick-up of Fuel Pumps (FP), checking
- Check-valves of Fuel Pumps (FP), checking
- Check-valve of Transfer Fuel Pump (FP) G23, checking
- Check-valve of Fuel Pump (FP) G6, checking
- EVAP canister system
- Electronic engine power control (EPC)
- Fuel supply system, components
- 24 - Multiport Fuel Injection (MFI)
- Fuel injection system, servicing
- Fuel injection system, servicing
- Fuel Injection system, general notes
- Safety precautions
- Rules of cleanliness
- Intake manifold, assembly overview (vehicles with engine code BAP)
- Upper section of intake manifold, assembly overview (vehicles with engine code BRP)
- Lower section of intake manifold, assembly overview (vehicles with engine code BRP)
- Fuel rail with fuel injectors - assembly overview
- Air filter - assembly overview
- Technical data
- Components of engine, checking
- Components of engine, checking
- Check oxygen sensor heater for oxygen sensors before catalytic converter
- Checking voltage supply and wiring to control module
- Ground (GND) activation of oxygen sensor heating, checking
- Oxygen sensor heater for oxygen sensors behind Three Way Catalytic Converter (TWC), checking
- Voltage supply and wiring to control module, checking
- Checking Ground (GND) activation of oxygen sensor heating
- Mass Air Flow (MAF) sensor, checking
- Voltage supply of Mass Air Flow (MAF) sensors, checking
- Checking signal and Ground wires of Mass Air Flow (MAF) Sensors
- Throttle valve control modules, checking
- Checking wires to Engine Control Module (ECM)
- Coolant temperature sensor, checking
- Intake Air Temperature (IAT) sensor, checking
- Engine Control Module (ECM), checking wires to
- Engine Coolant Temperature (ECT) Sensor (on Radiator), checking
- Thermostat for characteristic map controlled engine cooling
- Coolant FC (Fan Control) Control Modules, checking
- Engine Speed (RPM) sensor, checking
- Fuel injectors, checking
- Resistance values of fuel injectors, checking
- Voltage supply, checking
- Activation and voltage supply, checking
- Injection quantity and proper seal of fuel injectors, checking
- Injection quantity, checking
- Fuel pressure regulator and residual pressure, checking
- Intake system, checking for leaks (false air)
- Function tests
- Engine Control Modules (ECM)
- Additional signals, checking
- Fuel injection system, servicing
- 26 - Exhaust System, Emission Controls
- Exhaust system
- Exhaust system
- Exhaust System, general notes
- Exhaust manifold with primary catalytic converters and attachments cylinder bank 1, assembly overview
- Exhaust manifold with primary catalytic converters and attachments cylinder bank 2, assembly overview
- Primary catalytic converters with exhaust pipes, aligning
- Catalytic converter with muffler and attachments, assembly overview
- Three Way Catalytic Converters (TWC), checking
- Secondary air system
- Secondary air system
- Secondary Air Injection (AIR) system, general notes
- Secondary Air Injection (AIR) system, function
- Secondary Air Injection (AIR) system on body side - assembly overview
- Secondary Air Injection (AIR) system on engine side - assembly overview
- Secondary Air Injection (AIR) system, checking for proper seal
- Secondary Air Injection (AIR) pump motors, checking
- Secondary Air Injection (AIR) valves, checking (vehicles with engine code BAP)
- Engine Control Module (ECM), checking wires to
- Combination valves, checking (vehicles with engine code BAP)
- Exhaust system
- 28 - Ignition system
- Ignition, servicing
- Ignition, servicing
- Ignition System, general notes
- Safety precautions
- Rules of cleanliness
- Ignition - assembly overview
- Test Data, Spark Plugs
- Ignition coils with power output stage, removing and installing
- Ignition coils with power output stages, checking
- Engine Control Module (ECM), checking wires to
- Camshaft Position (CMP) sensor, checking
- Checking wires to Engine Control Module (ECM)
- Check knock sensors
- Check camshaft adjustment valves
- Ignition, servicing
- 38 - Automatic Transmission - Gears, Hydraulic Controls, Valve Body
- Electrical components for regulating transmission, checking
- Electrical components for regulating transmission, checking
- Safety precautions when working on transmission
- Rules of cleanliness
- Multi-Function Transmission Range (TR) Switch, replacing
- Multi-Function Transmission Range (TR) Switch, checking
- Sensor for transmission RPM, checking
- Transmission Output RPM, checking
- Transmission Fluid Temperature Sensor, checking
- Solenoid valves in valve body, checking
- Pressure regulator valves in valve body, checking
- Transmission Control Module (TCM)
- Electrical components for regulating transmission, checking
- 20 - Fuel Pump, Fuel Supply, Evaporative Emissions
- 6.0L 12-CYL 4V Engine Mechanical, Fuel Injection & Ignition, Engine Code(S): BRP, Bap
- Vacuum Diagrams
- Emissions
- General Information
- Abbreviations
- Basic Trouble Shooting
- Basic Trouble Shooting - General Information
- Commonly Used Abbreviations - General Information
- Emission Control Abbreviations
- Engine Performance - Trouble Shooting - General Information
- Brakes
- Anti-Lock Brake Safety Precautions - General Information
- Map - Brake Systems
- Brake Systems
- Notes
- Map Standards Of Service
- The Map Process - Overview
- The Map Process - Overview Of Service Requirements And Suggestions
- Accelerometers
- Accumulators
- Anchor Pins
- Anti-Lock Brake Control Assembly(Module)
- Anti-Lock Brake Controller
- Anti-Lock Brake Systems
- Axle Seal
- Backing Plates
- Bleeder Screw
- Brake Abs Active Light (Blue)
- Brake Fluid
- Brake Friction Material
- Brake On - Off Switch
- Brake Pads
- Brake Pedals
- Brake Shoe Hardware
- Brake Shoes
- Brake Stoplight Switches
- Brake Warning Light (Amber)
- Brake Warning Light (Red)
- Bulb Sockets
- Bulbs And LEDS
- Caliper Hardware
- Caliper Mounting Pin
- Caliper Piston
- Caliper Shim
- Caliper Slider Pin (Bolt) Dust Boot
- Caliper Slider Pin (Bolt)
- Calipers
- Combination Valve
- Controllers
- Digital Ratio Axle Controllers And Buffers (Drab And Dram)
- Disable Switches
- Drums
- Electrical Brake Pumps
- Electrical Park Motor
- Electrical Pumps And Motors
- Electro-Magnetic Interference
- Electronic Brake Control Modulator
- Electronic Brake Distribution
- Electronic Brake Traction Control Module
- Electronic Controllers
- Electronic Traction Control
- External Brake Cable
- Flow Control Valve
- Fluid Level Sensor Switches
- Fluid
- Four Wheel Drive Switches
- Friction Material
- G Sensors
- Gaskets
- Gravitational Switches
- Grease Seal
- Height Sensing Proportioning Valve
- High Pressure Accumulator
- Hoses
- Hub
- Hydraulic Control Unit
- Hydraulic Modulators
- Hydro-Boosters
- Hydro-Electric Boosters (POWERMASTER)
- Ignition Disable Switches
- Lamp Driver Relay
- Lateral Acceleration Switches
- LEDS
- Lenses
- Low Pressure Accumulator
- Lug Nut
- Master Cylinder Cover Gasket
- Master Cylinders
- Modulators
- Motor Pack
- Motors
- Pads
- Parking Brake Cable
- Parking Brake Mechanism
- Parking Brake Shoes
- Parking Brake Switches
- Parking Brake Systems
- Pedal Travel Switches
- Pedals
- Power Distribution Center
- POWERMASTER
- Pressure Differential Switches
- Pressure Switches
- Pressure Transducers
- Proportioning Valve
- Pumps
- Relays
- RELUCTOR (Speed) Ring
- Rotors
- Self-Adjusting Systems
- Shoe Hardware
- Shoes
- Sockets
- Speed Sensor (RELUCTOR) Ring
- Speed Sensors (Electronic Wheel And Vehicle)
- Star Wheel
- Steel Brake Lines
- Stoplight Switches
- Stroke Sensor
- Switches
- Tires
- Tone Ring
- Toothed Rings (Tone Wheel)
- Traction Control System (TCS)
- Transfer Tubes
- Vacuum Boosters
- Vacuum Hoses
- Valves
- Wear Indicator
- Wheel Attachment Hardware
- Wheel Bearings, Races And Seals
- Wheel Cylinders
- Wiring Harnesses
- Yaw Rate Sensor
- Brake System CHECKSHEET
- Reason Code Explanation
- Automotive Terminology & Definitions
- Brake Systems
- Map - Routine Inspection Reference Guide
- Routine Inspection Reference Guide
- Notes
- Map Standards Of Service
- The Map Process - Overview
- The Map Process - Overview Of Service Requirements And Suggestions
- Maintenance Overview
- Antifreeze/Coolant
- Visual Inspection
- Radiator Cap Test
- Engine Fan
- Cooling System Power Flush And Refill
- Belts (Except Timing Belts)
- Belt TENSIONER
- Automatic Transmission Fluid
- Automatic Transmission Fluid Exchange & Filter Replacement
- Engine Oil
- Air Filters
- Cabin Air Filter
- Brake Fluid
- Battery
- Battery Cables
- Power Steering
- Power Steering Fluid
- Wiper Blades
- Routine Inspection CHECKSHEET
- Routine Inspection - UICS
- Brake Systems
- Drivetrain And Transmission
- Notes
- Automatic Transmission Fluid
- Clutch Master Cylinders
- Cooler Lines
- Coolers
- Differential Fluid
- Drain Plugs And Gaskets
- Filters And Screens
- Fluids And Lubricants
- Hoses, Lines, And Tubes
- Hydraulic Fluid
- Lubricants
- Manual Transmission Fluid
- Mounts (Engine, Transaxle And Transmission)
- Transfer Case Fluid
- Vacuum Hoses
- Electrical Systems
- Engine Performance And Maintenance
- Notes
- Accessory Belts
- Air Filter Elements
- Air Filter Gaskets
- Air Filter Housings And Gaskets
- Air Pump Belts
- Batteries
- Battery Connectors
- Belt Idler Assemblies (Accessory And Cam Belts)
- Belt TENSIONERS (Accessory And Cam Belt)
- Chemical Engine DECARBONIZATION
- Combustion Chamber Cleaning
- Coolant Recovery Tanks
- Coolant
- Distributor Caps
- Distributor Rotors
- Engine Cooling Systems
- Engine DECARBONIZATION
- Engine Oil Drain Plugs And Gaskets
- Engine Oil Filters And Canisters
- Engine Oil
- Fuel Filters
- Fuel Injector Cleaning
- Fuel Injectors
- Fuel System Cleaning Service
- Hose Clamps
- Hose Connectors
- Hose Couplers
- Hoses And Tubes (Fuel Lines, Radiator, Vacuum, By-Pass, Heater, Recovery Tank And Oil Coolers)
- Ignition Wires (Secondary)
- Intake Cleaning
- O2 Sensors
- PCV Breather Elements
- PCV Valves
- Radiator Caps And Pressurized Expansion Tank Caps
- Spark Plugs
- Thermostats And Housings
- Throttle Body Cleaning
- Timing Belts
- Vacuum Hoses, Tubes And Connections (Non-Metallic)
- Exhaust Systems
- Heating, Ventilation And Air Conditioning Systems
- Steering And Suspension, Wheel Alignment, Wheels And Tires
- Wheel & Tire Supplement
- Reason Code Explanation
- Automotive Terminology & Definitions
- Routine Inspection Reference Guide
- Check Lists
- OBD-II Drive Cycles
- Driveline/Axles
- Drive Axle Noise Diagnosis - General Information
- Gear Tooth Contact Patterns - General Information
- Map - Drive Train & Transmission
- Drive Train & Transmission Systems
- Drivetrain And Transmission
- Notes
- Actuators (Electrical)
- Actuators (Vacuum)
- Automatic Transmission / Transaxle Assemblies/CVTS
- Automatic Transmission Fluid
- Axles
- Bearings And Races
- Bell Cranks
- Bell Housings
- Bushings (External)
- Cables (Speedometer)
- Cables (TV, Detent And Shift)
- Carrier Bearings
- Clutch Cables And Cable Housings
- Clutch Discs (Manual Transmissions)
- Clutch Forks
- Clutch Linkages (Mechanical)
- Clutch Master Cylinders
- Clutch Pedals
- Clutch Pivots
- Clutch Pressure Plates
- Clutch Release Bearings
- Clutch Slave Cylinders (Concentric)
- Clutch Slave Cylinders (Conventional Or External)
- Companion Flanges
- Connectors
- Cooler Bypass Valves
- Cooler Lines
- Coolers
- CV Joints
- Differential And Final Drive Assemblies
- Differential Fluid
- Dip Stick Tubes
- Dip Sticks (Fluid Level Indicators)
- Dowel Pins, Guides And Pilot Holes
- Drain Plugs And Gaskets
- Drive Shaft Flanges
- Drive Shafts And Half Shafts
- Dust Boots
- Engine Mounts
- Exciter Rings
- Filler Tubes
- Filters And Screens
- Flanges
- Flex Plates
- Fluid Level Indicators
- Fluids And Lubricants
- Flywheels
- Force Motors
- Gaskets
- Guides
- Half Shafts
- Hoses, Lines, And Tubes
- Housings (Bell, Case, Tail(Extension) And Auxiliary)
- Hydraulic Fluid
- Intermediate Shaft Support Bearings
- Key Interlock Systems
- Limited Slips
- Lines
- Linkages (External)
- Locking Hub Assemblies
- Locking Hub Control Knobs
- Lubricants
- Manual Transmission Fluid
- Manual Transmission/Transaxle Assemblies
- Metal Clad Seals
- METALASTIC Joints
- Modulator Pins
- Modulators
- Mounts (Engine, Transaxle And Transmission)
- Odometer Drives (Mechanical)
- Odometer Heads (Mechanical)
- Oil Pans
- Pans
- Pilot Holes
- Pressure Plates
- Pressure Switches
- Races
- Rubber Joints (METALASTIC)
- Screens
- Seals (Metal Clad)
- Seals
- Selector Interlock Systems
- Sensors
- Servos
- Shift Interlock Systems (Selector And Key Interlock Systems)
- Side Covers
- Slip Yokes
- Solenoids
- Speed Sensors (Electronic Wheel And Vehicle)
- Speedometer- Driven Gear Housing
- Speedometer/Odometer Drives (Mechanical)
- Speedometer/Odometer Heads (Mechanical)
- Speedometers/Odometers (Electronic)
- Switches
- Tone Wheels
- Toothed Rings (Tone Wheel)
- Torque Converters
- Transaxle Mounts
- Transducers (Transmission)
- Transfer Case Assemblies
- Transfer Case Fluid
- Transmission Coolers
- Transmission Mounts
- Transmission Pans
- Transmission Range Indicators (PRNDL)
- Tubes
- Universal Joints (CARDAN Or Cross Type)
- Vacuum Controls
- Vacuum Hoses
- Vacuum Motors
- Vacuum-Operated Switches
- Vehicle Speed Sensors
- Vents
- Vibration Dampers
- Wheel Attachment Hardware
- Wheel Speed Sensors
- Wiring Harnesses And Connectors
- Yokes And Slip Yokes
- Reason Code Explanation
- Automotive Terminology & Definitions
- Trouble Shooting - Clutches - General Information
- Electrical
- Map - Electrical Systems
- Electrical Systems
- Notes
- Map Standards Of Service
- The Map Process - Overview
- The Map Process - Overview Of Service Requirements And Suggestions
- Actuator Motors (Electric)
- Actuator Motors (Vacuum)
- Air Bags
- Alternators And Generators
- Amplifiers
- Antennas
- Batteries
- Battery Cables, Wires And Connectors
- Battery Cables
- Battery Trays And Hold Down Hardware
- Battery Wires
- Belts
- Bulb Sockets
- Bulbs, Sealed Beams And LEDS
- Cd Players
- Cigarette Lighter Assemblies
- Circuit Breakers
- Clutch Switches
- Connectors
- Control Modules
- Cruise Control Brake Switches
- Cruise Control Cables
- Cruise Control Clutch Switches
- Cruise Control Linkages And Cables
- Cruise Control Reservoirs
- Cruise Control Tubes
- Cruise Control Vacuum Dump Release Valves
- Cruise Control Vacuum Hoses, Tubes And
- Cruise Control Vehicle Speed Sensors
- Defoggers
- Defrosters
- Delays
- Dimmers
- Electric Heaters
- Equalizers
- Fuse Blocks
- Fuse Boxes And Blocks
- Fuses, Fusible Links And Circuit Breakers
- Fusible Links
- Gauges
- Generators
- Ground Cables And Straps
- Ground Straps
- Headlight Adjusters
- Heating Elements (Defrosters, Defoggers, Electric Heaters And Seats)
- Horns And Sirens
- Ignition Switches
- Indicator Lights
- Keyless Entry Keypads And Transmitters
- Keyless Entry Transmitters
- LEDS
- Lenses
- Microphones
- Mirrors (ELECTROCHROMATIC And Heated)
- Motors
- Neutral Safety Switches
- Odometers, Speedometers And Tachometers (Cable Driven)
- Odometers
- Power Distribution Center
- Pulleys
- Receivers, Amplifiers, Equalizers And Sub-Woofer Volume Controls
- Relay Boxes
- Relays
- Sealed Beams
- Seat Heaters
- Security Alarm Sensors
- Sirens
- Solenoids
- Speakers And Microphones
- Speedometer And Tachometer Linkages And Cables
- Speedometer Cables
- Speedometers
- Starters
- Sub-Woofer Volume Control
- Switches
- Tachometer Cables
- Tachometers
- Tape Players And Cd Players
- TENSIONERS
- Timers
- Transceivers
- Transducers
- Vacuum Accumulators (Reservoirs)
- Voltage Regulators
- Washer Fluid Level Senders
- Washer Pumps
- Wiper Arms And Blades
- Wiper Blades
- Wiper Hoses And Nozzles
- Wiper Linkages
- Wiper Nozzles
- Wiper Pump Reservoirs
- Wiring Harnesses And Connectors
- Battery, Starting & Charging System CHECKSHEET
- Reason Code Explanation
- Automotive Terminology & Definitions
- Electrical Systems
- Using lemon2025'S System Wiring Diagrams
- Map - Electrical Systems
- Engine
- Engine Overhaul Procedures - General Information
- * Please Read This First *
- Description
- Engine Identification
- Inspection Procedures
- Cleaning Procedures
- Component Cleaning
- Cylinder Head Replacement
- Cylinder Head Overhaul
- Pistons, Connecting Rods & Bearings
- Crankshaft & Main Bearings
- Camshaft
- Timing Chains & Belts
- Timing Gears
- Oil Pump
- Break-In Procedure
- General Cooling System Service - General Information
- Engine Overhaul Procedures - General Information
- Engine Performance
- Electrostatic Discharge Warning - General Information
- Engine Performance Diagnostic Routine Outline - General Information
- Engine Performance Safety Precautions
- Map - Engine Performance & Maintenance
- Engine Performance And Maintenance (Including Exhaust Systems)
- Engine Performance & Maintenance CHECKSHEET
- Engine Performance And Maintenance
- Notes
- Accelerator Pedal Position Sensor
- Accessory Belts
- Accessory Pulleys
- Air Conditioning Cycling Switches
- Air Conditioning Pressure Sensors
- Air Ducts And Tubes
- Air Filter Elements
- Air Filter Gaskets
- Air Filter Housings And Gaskets
- Air Fuel Ratio Sensors
- Air Injection Control Solenoids
- Air Plenums
- Air Pump Belts
- Air Pumps (Electric Driven)
- Air Tubes
- Aspirator, Check And DECEL Valves
- Baffles
- Ballast Primary Supply Resistor Wires
- Ballast Resistors And Primary Supply Resistors
- Barometric Pressure Sensors
- Batteries
- Battery Cables, Wires And Connectors
- Battery Connectors
- Battery Trays And Hold Down Hardware
- Battery Wires
- Belt Idler Assemblies (Accessory And Cam Belts)
- Belt TENSIONERS (Accessory And Cam Belt)
- Belt-Driven Air Pumps
- Boost Control Mechanism
- Camshaft Position Sensors
- Carburetors And Chokes
- Casting Core Plugs And Expansion Plugs
- Charge Air Coolers ""INTERCOOLERS"" (CAC)
- Check Valves
- Chemical Engine DECARBONIZATION
- Chokes
- Clutch Pedal Position Switches
- Cold Start Injectors
- Combustion Chamber Cleaning
- Connectors
- Coolant Recovery Tanks
- Coolant
- Cooling Fan Motor Modules
- Cooling Fan Motor Relays And Modules
- Cooling Fan Motor Resistors
- Cooling Fan Motor Sensors And Switches
- Cooling Fan Motor Switches
- Cooling Fan Motors
- Crankshaft Position Sensors
- Cylinder Deactivation Solenoid
- Cylinder Head Assemblies
- DECEL Valves
- Deflectors
- Dip Stick Tubes
- Dip Sticks And Tubes
- Distributor Advances And Retarders (Mechanical And Vacuum)
- Distributor Boots And Shields
- Distributor Caps
- Distributor Retarders (Mechanical And Vacuum)
- Distributor Rotors
- Distributor Shields
- Distributors
- Early Fuel Evaporation Valves (Heat Riser Assemblies)
- EGR Coolers
- EGR Exhaust Manifold Passages
- EGR Intake And Exhaust Manifold Passages
- EGR Plates And Coolers
- Electronic Spark Control Modules
- Electronic Transmission Control Devices
- Electronic Transmission Feedback Devices
- Engine Coolant Temperature Sensors
- Engine Cooling Systems
- Engine Covers (Oil Pan, Valve Cover, Timing Cover)
- Engine DECARBONIZATION
- Engine Oil Canisters
- Engine Oil Coolers (External)
- Engine Oil Drain Plugs And Gaskets
- Engine Oil Filters And Canisters
- Engine Oil Gaskets
- Engine Oil Pressure Gauges (Mechanical)
- Engine Oil
- Evaporative Emissions (EVAP) Canister Filters
- Evaporative Emissions (EVAP) Canister Purge Devices
- Evaporative Emissions (EVAP) Canisters
- Evaporative Emissions (EVAP) Feedback Devices
- Exhaust Gas RECIRCULATION Devices
- Exhaust Gas RECIRCULATION Feedback Devices
- Expansion Plugs
- Fan Control Sensor
- Fuel Accumulators And Dampers
- Fuel And Cold Start Injectors
- Fuel Caps
- Fuel Dampers
- Fuel Delivery Check Valves
- Fuel Distributors (BOSCH Cis)
- Fuel Filler Necks And RESTRICTORS
- Fuel Filters
- Fuel Injector Cleaning
- Fuel Injectors
- Fuel Level Senders
- Fuel Pressure Regulators
- Fuel Pumps (In-Tank, External, Electrical Or Mechanical)
- Fuel Rails
- Fuel RESTRICTORS
- Fuel System Cleaning Service
- Fuel Tanks
- Fuel
- Gaskets
- Grommets (Valve Cover)
- Harmonic Dampers
- Heater Control Valves
- Heater Cores
- Hose Clamps
- Hose Connectors
- Hose Couplers
- Hoses And Tube Couplers, Connectors And Clamps
- Hoses And Tubes (Fuel Lines, Radiator, Vacuum, By-Pass, Heater, Recovery Tank And Oil Coolers)
- Housings
- Idle Air Controls
- Idle Speed Control Actuators
- Ignition Boots
- Ignition Coil Towers
- Ignition Coils
- Ignition Control Modules (ICM)
- Ignition Switches
- Ignition Terminals
- Ignition Wires (Secondary)
- Inertia Fuel Shut-Off Switches
- Intake Air Temperature Sensors
- Intake Cleaning
- Intake Manifolds
- In-Tank Fuel Strainers
- INTERCOOLERS
- Knock Sensors
- Liquid Vapor Separators
- Long Block Assemblies
- Manifold Absolute Pressure (Map) Sensors
- Mass Air Flow (MAF) Sensors
- Metal Air Manifolds And Pipes
- Metal Air Pipes
- Mix Control Solenoids
- Motor Mounts
- O2 Sensors
- Oil Pans
- Oil Pressure Sending Units
- Oil Pump Pick-Up Screens
- Oil Pumps
- O-Rings, Gaskets, Seals And Spring Locks
- Park Neutral Position Switches
- PCV Breather Elements
- PCV Orifices
- PCV Valves
- Pick-Up Assemblies (Includes Magnetic, Hall Effect And Optical)
- Power Steering Pressure Sensors
- Powertrain Control Modules (Pcm) And Prom
- Powertrain Control Prom
- Pressurized Expansion Tank Caps
- Radiator / Cooling Fan Blades
- Radiator / Cooling Fan Clutches
- Radiator Caps And Pressurized Expansion Tank Caps
- Radiators
- Roll Over Valves
- Sealing Compounds
- Seals
- Secondary Air Injection System Management Devices
- Sensors
- Short Block Assemblies
- Shrouds, Baffles And Deflectors
- Spark Plugs
- Spring Locks
- Super Chargers
- Switches
- Thermal Vacuum Valves
- Thermostatic Air Door Assemblies
- Thermostats And Housings
- Throttle Bodies
- Throttle Body Cleaning
- Throttle Cables
- Throttle Linkages And Cables
- Throttle Position Sensors
- Throttle Position Switches
- Timing Belt Sprockets
- Timing Belts
- Timing Covers
- Torque Struts
- Transmission Range Switches
- Tube Clamps
- Tube Connectors
- Tube Couplers
- Tubes
- Turbo Chargers
- Vacuum Connections
- Vacuum Hoses, Tubes And Connections (Non-Metallic)
- Vacuum Regulator Solenoids
- Vacuum Tubes
- Valve Covers
- Vehicle Speed Senors
- Volume Air Flow Sensors
- Waste Gate And Boost Control Mechanisms
- Waste Gate Control Solenoids
- Water Pumps (Electric)
- Water Pumps (Non-Electric)
- Wiring Harnesses And Connectors
- Reason Code Explanation
- Automotive Terminology & Definitions
- Parasitic Load Explanation & Test Procedures - General Information
- State Emission Standards - Diesel
- State Emission Standards - Gas
- ALASKA
- ARIZONA
- CALIFORNIA
- Colorado
- CONNECTICUT
- DELAWARE
- District Of COLUMBIA
- GEORGIA
- IDAHO
- ILLINOIS
- INDIANA
- KENTUCKY
- MARYLAND
- MASSACHUSETTS
- MISSOURI
- NEVADA
- New Jersey
- New MEXICO
- New YORK
- North CAROLINA
- OHIO
- OREGON
- PENNSYLVANIA
- RHODE Island
- TENNESSEE
- TEXAS
- UTAH
- VIRGINIA
- WASHINGTON
- WISCONSIN
- U. S. EPA ASM2525 & ASM5015 Start-Up Emission Standards
- U. S. EPA Revised Final ASM Emission Standards (ASM5015 & ASM2525)
- U.S. EPA Im240 Emission Standards
- Waveforms - Injector Pattern Tutorial - General Information
- * Please Read This First *
- Purpose Of This Article
- Is A Lab Scope Necessary?
- The Two Types Of Injector Drivers
- The Two Ways Injector Circuits Are Wired
- Interpreting Injector Waveforms
- Current Waveform Samples
- Notes
- Example #1 - Voltage Controlled Driver
- Example #2 - Voltage Controlled Driver
- Example #3 - Voltage Controlled Driver
- Example #4 - Current Controlled Driver
- Example #5 - Current Controlled Driver
- Example #6 - Current Controlled Driver
- Example #7 - Current Controlled Driver
- Example #8 - Current Controlled Driver
- Voltage Waveform Samples
- Notes
- Example #1 - Voltage Controlled Driver
- Example #2 - Voltage Controlled Driver
- Example #3 - Voltage Controlled Driver
- Example #4 - Current Controlled Driver
- Example #5 - Current Controlled Driver
- Example #6 - Current Controlled Driver
- Example #7 - Current Controlled Driver
- Example #8 - Current Controlled Driver
- Map - Exhaust Systems
- Exhaust Systems
- Notes
- Map Standards Of Service
- The Map Process - Overview
- The Map Process - Overview Of Service Requirements And Suggestions
- Catalytic Converters
- Exhaust And Tail Pipes
- Exhaust Connections
- Hangers
- Heat Risers (Mechanical EFE Devices)
- Heat Shields
- Manifolds (Cast And Tube Type)
- Mechanical EFE Devices
- Muffler Valve
- Mufflers And Resonators
- Reason Code Explanation
- Exhaust Systems
- Heating, Ventilation & A/C (HVAC)
- Map - Heating, Ventilation, & Air Conditioning
- Heating, Ventilation & Air Conditioning Systems
- Notes
- Map Standards Of Service
- The Map Process - Overview
- The Map Process - Overview Of Service Requirements And Suggestions
- Accumulators
- Actuators (Electrical)
- Actuators (Vacuum)
- Air Conditioning Fittings
- Air Conditioning Hoses
- Air Conditioning Metal Lines
- Air Control Doors
- Air Dams (External)
- Air Distribution System
- Belts
- Blend Doors
- Blower Fans (Blower Wheel Or Squirrel Cage)
- Blower Motors
- Blower Resistors
- Blower Switches
- Cabin Air Filters
- Circuit Breakers
- Compressor Clutch Assemblies
- Compressors
- Condenser Air Seals
- Condenser Fan Motors
- Condensers
- Connectors
- Control Cables
- Control Heads (Function Selectors)
- Control Linkages
- Control Modules
- Coolant
- Cooling Fan Blades
- Cooling Fan Clutches
- Cooling Fan Motors
- Evaporator Drain Tubes
- Evaporator Filters
- Evaporator Pressure Regulators (EPRS)
- Evaporators
- Expansion Valves
- Function Selectors
- Fuses, Fusible Links And Circuit Breakers
- Fusible Links
- Gaskets
- Heater Cases
- Heater Control Valves
- Heater Cores
- Heater Hoses
- High Pressure Relief Valves (HPRV)
- Idlers
- In-Line Filters
- Metal Fittings
- Metal Lines
- Mix And Air Control Doors (Blend Doors)
- ORIFACE Tubes
- O-Rings
- Pilot-Operated Absolutes (POAS)
- Plenums
- Pressure Control Valves
- Pressure Sensors
- Pulleys
- Radiators
- Receiver-DRIERS
- Refrigerant Oil
- Refrigerant
- Relays
- Seals
- Service Ports
- Spring Lock Couplings
- Suction Throttling Valves (STVS)
- Switches (Electrical)
- TENSIONERS
- Thermistors And Pressure Sensors
- Thermostats And Housings
- Vacuum Hoses And Tubes
- Vacuum Reservoirs
- Vacuum Tubes
- Valves In Receiver (VIRS)
- Water Pumps (Electric Auxiliary)
- Wiring Harnesses And Connectors
- Heating, Ventilation & Air Conditioning System CHECKSHEET
- Reason Code Explanation
- Automotive Terminology & Definitions
- Heating, Ventilation & Air Conditioning Systems
- Map - Heating, Ventilation, & Air Conditioning
- Identification
- Metric Conversions
- Reset Procedures
- ATEQ TPMS Reset Procedure
- BARTEC TPMS Reset Procedure
- Maintenance Reminder Light (Reset Procedures)
- Emissions Maintenance Reminder (EGR)
- Emissions Maintenance Reminder (Oxygen Sensor)
- Maintenance Service Reminder
- Notes
- Maintenance Service Reminder Reset - Procedure 01
- Maintenance Service Reminder Reset - Procedure 02
- Maintenance Service Reminder Reset - Procedure 03
- Maintenance Service Reminder Reset - Procedure 04
- Maintenance Service Reminder Reset - Procedure 05
- Maintenance Service Reminder Reset - Procedure 06
- Maintenance Service Reminder Reset - Procedure 07
- Maintenance Service Reminder Reset - Procedure 08
- Maintenance Service Reminder Reset - Procedure 09
- Maintenance Service Reminder Reset - Procedure 10
- Tire Pressure Monitor System Reminder
- Notes
- TPMS Reminder Reset - Procedure 01
- TPMS Reminder Reset - Procedure 02
- TPMS Reminder Reset - Procedure 03
- TPMS Reminder Reset - Procedure 04
- TPMS Reminder Reset - Procedure 05
- TPMS Reminder Reset - Procedure 06
- TPMS Reminder Reset - Procedure 07
- TPMS Reminder Reset - Procedure 08
- TPMS Reminder Reset - Procedure 09
- Tire Pressure Monitor Systems
- Restraints
- Specifications Index
- Steering
- Map - Steering, Suspension, Wheel Alignment, Wheels & Tires
- Steering & Suspension Systems
- Wheel And Tire
- Steering & Suspension CHECKSHEET
- Wheels & Tires CHECKSHEET
- Steering And Suspension, Wheel Alignment, Wheels And Tires
- Notes
- Active Handling
- Active Suspension Control Modules
- Active Variable Ratio Steering
- Active Yaw Control
- Adaptive Cruise Control
- Advance TRAC
- Air Bags
- Air Ride Control Modules
- Air Ride Suspension Torsion Springs (Counter Balancing)
- Air Ride Suspension
- Air Ride Tubes
- Air Shocks And Air Struts
- Air Spring Valves
- Air Springs
- Air Suspension Control Valves
- Air Suspension DRIERS
- Axle Acceleration Sensor
- Ball Joints
- Body Acceleration Sensor
- Bushings
- Center Links
- Compressors
- Continuous Damping Control
- Control Arm Shafts
- Control Arms
- Control Modules
- Distance Regulation Control Module
- Distance Regulation Sensor
- Drag Links
- Dynamic Stability Control
- Dynamic Stability Traction Control
- Electronic Ride Control Shocks And Struts
- Electronic Stability Control
- Electronic Suspension System
- Flex Couplers
- Gaskets
- Height Sensors
- Hydraulic Hoses
- Hydraulic Power Steering Pumps
- Hydraulic Suspension Hoses
- Hydraulic Suspension Pumps
- Idler Arms
- Intermediate Shaft U-Joints
- King Pins
- Modules
- Pitman Arms
- Power Steering Belts
- Power Steering Coolers
- Power Steering Fluid
- Power Steering Hoses
- Power Steering Lines (Steel)
- Power Steering Pumps - Electric
- Power Steering Pumps
- Radar Sensor
- Radius Arms
- Relay Rods
- Relays
- Sensors
- Shock Absorbers, Strut Cartridges And Strut Assemblies
- Spindles
- Springs, Coil, Leaf And Torsion Bars
- STABILITRAC
- Stability Management System
- Steering Angle Sensor
- Steering Arms
- Steering Couplers
- Steering Dampers
- Steering Gears (Except Rack And Pinion)
- Steering Gears, Rack And Pinion
- Steering Knuckles
- Strike Out Bumpers
- Strut Bearing Plate Assemblies
- Strut Rods
- Suspension Pumps (Hydraulic)
- Sway Bar Links
- Sway Bar Mounting Bushings
- Sway Bars
- Switches
- Tie Rod Ends (Inner And Outer)
- Tire Pressure Monitoring System
- Tire Pressure Sensors
- Tires
- Torque Sensor
- Torsion Springs
- Track Bar Bushings
- Track Bars
- Trailing Arm Bushings
- Trailing Arms
- Valve Stems
- Vehicle Dynamics Control
- Vehicle Speed Sensor
- Vehicle Stability Assist
- Vehicle Stability/Skid Control
- Warning Lamps
- Wheel Alignment
- Wheel Attachment Hardware
- Wheel Bearings, Races And Seals
- Wheels (Rims)
- Wiring Harnesses And Connectors
- Reason Code Explanation
- Automotive Terminology & Definitions
- Wheel Alignment Theory & Operation - General Information
- Map - Steering, Suspension, Wheel Alignment, Wheels & Tires
- Trouble Shooting - Manual Transmission - General Information
- Heating, Ventilation & A/C (HVAC)
- A/C Compressor
- Heating, Ventilation And Air Conditioning
- 80 - Heating, Ventilation
- Heating and A/C Unit, Disassembling and Assembling
- Notes
- Fresh Air Blower, Assembly Overview
- Air Intake Shroud with Air Flow Flap, Removing and Installing
- Fresh Air Blower, Removing and Installing
- Fresh Air Blower Control Module, Removing and Installing
- Right Heat Exchanger, Removing and Installing
- Left Heat Exchanger, Removing and Installing
- Pump Valve Unit, Removing and Installing
- Dust and Pollen Filter Element with Activated Charcoal Element, Removing and Installing
- Dust and Pollen Filter with Activated Charcoal Element, Function
- Air Quality Sensor, Removing and Installing
- Air Quality Sensor, Function
- Fresh Air Intake Duct Temperature Sensor, Removing and Installing
- Outside Air Temperature Sensor, Removing and Installing
- Water Drain Hose with Valve, Removing and Installing
- Ventilation, Checking
- Instrument Panel Interior Temperature Sensor, Removing and Installing
- Heat Exchanger Temperature Sensor, Removing and Installing
- Air Distribution Components
- Notes
- Left Air Outlet Blind Motor, Removing and Installing
- Left Instrument Panel Vents, Removing and Installing
- Right Air Outlet Blind Motor, Removing and Installing
- Right Instrument Cluster Vents, Removing and Installing
- Center Air Outlet Motor, Removing and Installing
- Center Instrument Cluster Vent, Removing and Installing
- Air Distribution Housing in Center of Instrument Cluster, Removing and Installing
- Air Distribution Housing in Center of Instrument Cluster, Assembly Overview
- Center Air Outlet Blind Bearing, Replacing
- Interior Air Flow
- Heating and A/C Unit, Disassembling and Assembling
- 87 - Air conditioning
- A/C System, Repairing
- Climatronic Air Conditioner with Automatic Regulation
- Notes
- Components, Checking and Adjusting
- Front Information Display Control Head Control Module
- Climatronic Control Module Connectors
- Notes
- Terminal Assignment of Multi-Pin Connectors A, B, C, D, E, F, G, H and J on Rear Side of Climatronic Control Module
- Connector Housing A, in Wiring Diagram T24 b
- Connector Housing B in Wiring Diagram T24 a
- Connector Housing C in Wiring Diagram T24
- Connector Housing D in Wiring Diagram T12 c
- Connector Housing E in Wiring Diagram T12 b
- Connector Housing F in Wiring Diagram T12 a
- Connector Housing G in Wiring Diagram T20 a
- Connector Housing H in Wiring Diagram T16 c
- Connector Housing J in Wiring Diagram T16 b
- Heating and Climatronic Components
- Heater and Air Conditioner Control Motors, Installation Positions
- A/C System Control and Regulation Components
- Notes
- Climatronic Control Module, Removing and Installing
- Sunlight Photosensor 2, Removing and Installing
- Humidity Sensor, Removing and Installing
- Condensation Water Hose, Removing and Installing
- Air Conditioner Control Motors, Replacing
- Air Flow Flap Motor, Removing and Installing
- Recirculation Flap Motor, Removing and Installing
- Defroster Flap Motor, Removing and Installing
- Left Front Defrost/Upper Body Shut-Off Flap Motor, Removing and Installing
- Right Front Defrost/Upper Body Shut-Off Flap Motor, Removing and Installing
- Footwell Flap Motor, Removing and Installing
- Right B-Pillar/Footwell Shut-Off Flap Motor, Removing and Installing
- Front Warm Air Flap Motor, Removing and Installing
- Rear Center Console Warm Air Flap Motor, Removing and Installing
- Rear Center Console Cold Air Flap Motor, Removing and Installing
- Right Defrost/Upper Body Flap Motor, Removing and Installing
- Left Defrost/Upper Body Flap Motor, Removing and Installing
- Front Cold Air Flap Motor, Removing and Installing
- Left B-Pillar/Footwell Shut-Off Flap Motor, Removing and Installing
- Left Footwell Flap Motor, Removing and Installing
- Evaporator Temperature Sensor, Removing and Installing
- Rear Center Console Temperature Sensor, Removing and Installing
- Center Outlet Temperature Sensor, Removing and Installing
- Rear Defrost Buttons, Removing and Installing
- Left Front Air Outlet Button, Removing and Installing
- Front Air Outlet Buttons and Footwell/Cabin Temperature Differential Button, Removing and Installing
- Rear Center Console Air Outlet Buttons, Removing and Installing
- Front Defroster Button, Removing and Installing
- Rear Information Display Control Head Control Module, Removing
- Rear Footwell Air Distribution Housing, Assembly Overview
- Auxiliary Component Bracket
- Notes
- Additional Assemblies, Compressor Bracket, Engine Code AYT and BKL, Removing and Installing
- Additional Assemblies, Compressor Bracket, Engine Code BGH and BGJ, Removing and Installing
- Additional Assemblies, Compressor Bracket, Engine Code BMK, Removing and Installing
- Compressor, Engine Code AJS, Removing and Installing
- Additional Assemblies, Compressor Bracket, Engine Code BAN, BAP and BRN, Removing and Installing
- Refrigerant Circuit, Specialized Repairs
- Refrigerant Circuit, Specialized Repairs
- Refrigerant Circuit Components, Servicing
- Evacuating and Charging Valve Low Pressure Side
- Evacuating and Charging Valve High Pressure Side
- Reservoir, Removing and Installing
- Compressor, Removing and Installing
- Evaporator and Covers in Plenum Chamber, Assembly Overview
- Evaporator, Removing and Installing
- Housing Lower Part, Disassembling and Assembling
- Air Distributor Housing, Disassembling and Assembling
- Quick Acting Coupling
- Compressor Pressure Relief Valve, Checking
- Compressor, Installing
- Compressor Manufacturers
- Air Conditioner Pressure/Temperature Sensor, Removing and Installing
- Restrictor, Removing and Installing
- Condenser, Removing and Installing
- Heating and A/C Unit, Removing and Installing
- Take-Up with Free-Running Hub at Compressor, Removing and Installing
- Capacities
- 80 - Heating, Ventilation
- Heating, Ventilation And Air Conditioning
- General Servicing
- Cabin Air Filter
- Refrigerant R134A - Servicing
- 00 - Technical data
- General information on A/C system
- Introduction
- Other reference material
- Principles of air conditioning systems
- Vapor pressure table for refrigerant R134a
- Refrigerant R134a
- Characteristics of refrigerant R134a
- Refrigerant oil
- Comfort
- Mode of operation of air conditioning system
- General work safety
- Notes
- Product characteristics
- Handling refrigerant
- Wear protective goggles
- Wear protective gloves and apron
- Do not allow liquid refrigerant to come into contact with the skin
- Do not inhale refrigerant vapor
- Absolutely no smoking
- Welding and soldering on refrigeration systems
- Pungent odor
- First aid
- Handling pressure vessels
- Do not warm above 50 ° C
- Do not heat in an uncontrolled manner
- Seal empty vessels
- Safety regulations for working with extraction and charging systems
- Safety measures for working on vehicles with air conditioning system and for handling refrigerant R134a
- Basic rules for working on refrigerant circuit
- General information on refrigerant circuit
- Components of refrigerant circuit
- Notes
- Arrangement of refrigerant circuit components and their influence on high and low pressure sides
- A/C compressor with magnetic clutch:
- A/C compressor without magnetic clutch
- A/C compressor without magnetic clutch with torsion-elastic clutch
- Condenser
- Evaporator
- Accumulator
- Restrictor
- Receiver
- Expansion valve
- O-ring seals
- Refrigerant circuit pipes and hoses
- Pressure relief valve
- Design of refrigerant circuit
- Connections for quick-release coupling on refrigerant circuit
- Switches and sensors on refrigerant circuit and corresponding connections
- Notes
- A/C Refrigerant High Pressure Switch F23
- A/C Refrigerant High Pressure Switch F118
- A/C Refrigerant Low Pressure Switch F73
- Connections with valve for switches on refrigerant circuit
- A/C Pressure Switch F129
- High Pressure Sensor G65
- A/C Pressure/temperature Sensor G395
- A/C Refrigerant Shut-Off Valve N43
- A/C Compressor Regulator Valve N280
- Electrical components not installed on the refrigerant circuit
- Pressures and temperatures in refrigerant circuit
- Refrigerant circuit with expansion valve
- Refrigerant circuit with restrictor and reservoir
- Tests and measurements performed using pressure gauge
- A/C Service and recycling units
- Refrigerant circuit repair information
- Components of refrigerant circuit
- Laws and regulations
- Refrigerant circuit
- Working with the service station
- Working with the service station
- Service station, connecting for measurement and testing
- Discharging refrigerant circuit using service station
- Charging refrigerant circuit using service station
- A/C system, operating after charging
- Transferring refrigerant to charging cylinder of A/C service station
- Draining service station
- Leak detection on refrigerant circuit
- Refrigerant circuit, removing contaminants
- Complaints
- Service station, connecting
- Checking pressures on vehicles
- Refrigerant circuit, checking pressures (using service station)
- with restrictor and reservoir (with internally regulator A/C compressor), checking
- Checking with expansion valve and reservoir (with internally regulated A/C compressor)
- checking with expansion valve and reservoir (without regulated A/C compressor)
- Checking with restrictor, reservoir and A/C Compressor Regulator Valve N280 (externally regulated compressor)
- Checking with expansion valve, reservoir and A/C Compressor Regulator Valve N280 (externally regulated compressor)
- Components, replacing
- Components, replacing
- Components leaking or damaged (except A/C compressor, accumulator or receiver)
- A/C compressor, replacing
- Fluid reservoir or reservoir and restrictor, replacing
- After contaminants are removed from refrigerant circuit, e.g. due to moisture entering (refrigerant circuit was open for a long time) or due to contamination
- Replacing without the need for removing contaminants from refrigerant circuit (e.g. in the event of accident damage); no escape of refrigerant and no penetration of moisture and dirt into circuit
- Testing equipment and tools
- List of testing equipment, tools and materials
- Notes
- Tools and materials available from regional sales center or importer
- Overview
- Notes
- Refrigerant Circuit Flushing Device VAS 6337/1 (Behr)
- Refrigerant Circuit Flushing Device VAS 6336/1 (Waeco)
- Leak detector V.A.G 1796
- Leak Detection System VAS 6196
- Leak detection system VAS 6201
- Release tool VAS 6127/1 release tool VAS 6127/2
- Counterhold V.A.G 1616 for clutch plate (for "Sanden" A/C compressors)
- Puller V.A.G 1616/1 (for "Sanden" A/C compressors)
- A/C Clutch Set V.A.G 1719 (for "Zexel" A/C compressors)
- Adapter Set V.A.G 1785/1-10
- Commercially available tools and materials
- Improvised tools
- List of testing equipment, tools and materials
- General information on A/C system
- 00 - Technical data
- HVAC Control Systems
- Heating, Ventilation And Air Conditioning
- 80 - Heating, Ventilation
- Heating and A/C Unit, Disassembling and Assembling
- Notes
- Fresh Air Blower, Assembly Overview
- Air Intake Shroud with Air Flow Flap, Removing and Installing
- Fresh Air Blower, Removing and Installing
- Fresh Air Blower Control Module, Removing and Installing
- Right Heat Exchanger, Removing and Installing
- Left Heat Exchanger, Removing and Installing
- Pump Valve Unit, Removing and Installing
- Dust and Pollen Filter Element with Activated Charcoal Element, Removing and Installing
- Dust and Pollen Filter with Activated Charcoal Element, Function
- Air Quality Sensor, Removing and Installing
- Air Quality Sensor, Function
- Fresh Air Intake Duct Temperature Sensor, Removing and Installing
- Outside Air Temperature Sensor, Removing and Installing
- Water Drain Hose with Valve, Removing and Installing
- Ventilation, Checking
- Instrument Panel Interior Temperature Sensor, Removing and Installing
- Heat Exchanger Temperature Sensor, Removing and Installing
- Air Distribution Components
- Notes
- Left Air Outlet Blind Motor, Removing and Installing
- Left Instrument Panel Vents, Removing and Installing
- Right Air Outlet Blind Motor, Removing and Installing
- Right Instrument Cluster Vents, Removing and Installing
- Center Air Outlet Motor, Removing and Installing
- Center Instrument Cluster Vent, Removing and Installing
- Air Distribution Housing in Center of Instrument Cluster, Removing and Installing
- Air Distribution Housing in Center of Instrument Cluster, Assembly Overview
- Center Air Outlet Blind Bearing, Replacing
- Interior Air Flow
- Heating and A/C Unit, Disassembling and Assembling
- 87 - Air conditioning
- A/C System, Repairing
- Climatronic Air Conditioner with Automatic Regulation
- Notes
- Components, Checking and Adjusting
- Front Information Display Control Head Control Module
- Climatronic Control Module Connectors
- Notes
- Terminal Assignment of Multi-Pin Connectors A, B, C, D, E, F, G, H and J on Rear Side of Climatronic Control Module
- Connector Housing A, in Wiring Diagram T24 b
- Connector Housing B in Wiring Diagram T24 a
- Connector Housing C in Wiring Diagram T24
- Connector Housing D in Wiring Diagram T12 c
- Connector Housing E in Wiring Diagram T12 b
- Connector Housing F in Wiring Diagram T12 a
- Connector Housing G in Wiring Diagram T20 a
- Connector Housing H in Wiring Diagram T16 c
- Connector Housing J in Wiring Diagram T16 b
- Heating and Climatronic Components
- Heater and Air Conditioner Control Motors, Installation Positions
- A/C System Control and Regulation Components
- Notes
- Climatronic Control Module, Removing and Installing
- Sunlight Photosensor 2, Removing and Installing
- Humidity Sensor, Removing and Installing
- Condensation Water Hose, Removing and Installing
- Air Conditioner Control Motors, Replacing
- Air Flow Flap Motor, Removing and Installing
- Recirculation Flap Motor, Removing and Installing
- Defroster Flap Motor, Removing and Installing
- Left Front Defrost/Upper Body Shut-Off Flap Motor, Removing and Installing
- Right Front Defrost/Upper Body Shut-Off Flap Motor, Removing and Installing
- Footwell Flap Motor, Removing and Installing
- Right B-Pillar/Footwell Shut-Off Flap Motor, Removing and Installing
- Front Warm Air Flap Motor, Removing and Installing
- Rear Center Console Warm Air Flap Motor, Removing and Installing
- Rear Center Console Cold Air Flap Motor, Removing and Installing
- Right Defrost/Upper Body Flap Motor, Removing and Installing
- Left Defrost/Upper Body Flap Motor, Removing and Installing
- Front Cold Air Flap Motor, Removing and Installing
- Left B-Pillar/Footwell Shut-Off Flap Motor, Removing and Installing
- Left Footwell Flap Motor, Removing and Installing
- Evaporator Temperature Sensor, Removing and Installing
- Rear Center Console Temperature Sensor, Removing and Installing
- Center Outlet Temperature Sensor, Removing and Installing
- Rear Defrost Buttons, Removing and Installing
- Left Front Air Outlet Button, Removing and Installing
- Front Air Outlet Buttons and Footwell/Cabin Temperature Differential Button, Removing and Installing
- Rear Center Console Air Outlet Buttons, Removing and Installing
- Front Defroster Button, Removing and Installing
- Rear Information Display Control Head Control Module, Removing
- Rear Footwell Air Distribution Housing, Assembly Overview
- Auxiliary Component Bracket
- Notes
- Additional Assemblies, Compressor Bracket, Engine Code AYT and BKL, Removing and Installing
- Additional Assemblies, Compressor Bracket, Engine Code BGH and BGJ, Removing and Installing
- Additional Assemblies, Compressor Bracket, Engine Code BMK, Removing and Installing
- Compressor, Engine Code AJS, Removing and Installing
- Additional Assemblies, Compressor Bracket, Engine Code BAN, BAP and BRN, Removing and Installing
- Refrigerant Circuit, Specialized Repairs
- Refrigerant Circuit, Specialized Repairs
- Refrigerant Circuit Components, Servicing
- Evacuating and Charging Valve Low Pressure Side
- Evacuating and Charging Valve High Pressure Side
- Reservoir, Removing and Installing
- Compressor, Removing and Installing
- Evaporator and Covers in Plenum Chamber, Assembly Overview
- Evaporator, Removing and Installing
- Housing Lower Part, Disassembling and Assembling
- Air Distributor Housing, Disassembling and Assembling
- Quick Acting Coupling
- Compressor Pressure Relief Valve, Checking
- Compressor, Installing
- Compressor Manufacturers
- Air Conditioner Pressure/Temperature Sensor, Removing and Installing
- Restrictor, Removing and Installing
- Condenser, Removing and Installing
- Heating and A/C Unit, Removing and Installing
- Take-Up with Free-Running Hub at Compressor, Removing and Installing
- Capacities
- 80 - Heating, Ventilation
- Refrigerant R134A - Servicing
- 00 - Technical data
- General information on A/C system
- Introduction
- Other reference material
- Principles of air conditioning systems
- Vapor pressure table for refrigerant R134a
- Refrigerant R134a
- Characteristics of refrigerant R134a
- Refrigerant oil
- Comfort
- Mode of operation of air conditioning system
- General work safety
- Notes
- Product characteristics
- Handling refrigerant
- Wear protective goggles
- Wear protective gloves and apron
- Do not allow liquid refrigerant to come into contact with the skin
- Do not inhale refrigerant vapor
- Absolutely no smoking
- Welding and soldering on refrigeration systems
- Pungent odor
- First aid
- Handling pressure vessels
- Do not warm above 50 ° C
- Do not heat in an uncontrolled manner
- Seal empty vessels
- Safety regulations for working with extraction and charging systems
- Safety measures for working on vehicles with air conditioning system and for handling refrigerant R134a
- Basic rules for working on refrigerant circuit
- General information on refrigerant circuit
- Components of refrigerant circuit
- Notes
- Arrangement of refrigerant circuit components and their influence on high and low pressure sides
- A/C compressor with magnetic clutch:
- A/C compressor without magnetic clutch
- A/C compressor without magnetic clutch with torsion-elastic clutch
- Condenser
- Evaporator
- Accumulator
- Restrictor
- Receiver
- Expansion valve
- O-ring seals
- Refrigerant circuit pipes and hoses
- Pressure relief valve
- Design of refrigerant circuit
- Connections for quick-release coupling on refrigerant circuit
- Switches and sensors on refrigerant circuit and corresponding connections
- Notes
- A/C Refrigerant High Pressure Switch F23
- A/C Refrigerant High Pressure Switch F118
- A/C Refrigerant Low Pressure Switch F73
- Connections with valve for switches on refrigerant circuit
- A/C Pressure Switch F129
- High Pressure Sensor G65
- A/C Pressure/temperature Sensor G395
- A/C Refrigerant Shut-Off Valve N43
- A/C Compressor Regulator Valve N280
- Electrical components not installed on the refrigerant circuit
- Pressures and temperatures in refrigerant circuit
- Refrigerant circuit with expansion valve
- Refrigerant circuit with restrictor and reservoir
- Tests and measurements performed using pressure gauge
- A/C Service and recycling units
- Refrigerant circuit repair information
- Components of refrigerant circuit
- Laws and regulations
- Refrigerant circuit
- Working with the service station
- Working with the service station
- Service station, connecting for measurement and testing
- Discharging refrigerant circuit using service station
- Charging refrigerant circuit using service station
- A/C system, operating after charging
- Transferring refrigerant to charging cylinder of A/C service station
- Draining service station
- Leak detection on refrigerant circuit
- Refrigerant circuit, removing contaminants
- Complaints
- Service station, connecting
- Checking pressures on vehicles
- Refrigerant circuit, checking pressures (using service station)
- with restrictor and reservoir (with internally regulator A/C compressor), checking
- Checking with expansion valve and reservoir (with internally regulated A/C compressor)
- checking with expansion valve and reservoir (without regulated A/C compressor)
- Checking with restrictor, reservoir and A/C Compressor Regulator Valve N280 (externally regulated compressor)
- Checking with expansion valve, reservoir and A/C Compressor Regulator Valve N280 (externally regulated compressor)
- Components, replacing
- Components, replacing
- Components leaking or damaged (except A/C compressor, accumulator or receiver)
- A/C compressor, replacing
- Fluid reservoir or reservoir and restrictor, replacing
- After contaminants are removed from refrigerant circuit, e.g. due to moisture entering (refrigerant circuit was open for a long time) or due to contamination
- Replacing without the need for removing contaminants from refrigerant circuit (e.g. in the event of accident damage); no escape of refrigerant and no penetration of moisture and dirt into circuit
- Testing equipment and tools
- List of testing equipment, tools and materials
- Notes
- Tools and materials available from regional sales center or importer
- Overview
- Notes
- Refrigerant Circuit Flushing Device VAS 6337/1 (Behr)
- Refrigerant Circuit Flushing Device VAS 6336/1 (Waeco)
- Leak detector V.A.G 1796
- Leak Detection System VAS 6196
- Leak detection system VAS 6201
- Release tool VAS 6127/1 release tool VAS 6127/2
- Counterhold V.A.G 1616 for clutch plate (for "Sanden" A/C compressors)
- Puller V.A.G 1616/1 (for "Sanden" A/C compressors)
- A/C Clutch Set V.A.G 1719 (for "Zexel" A/C compressors)
- Adapter Set V.A.G 1785/1-10
- Commercially available tools and materials
- Improvised tools
- List of testing equipment, tools and materials
- General information on A/C system
- 00 - Technical data
- Heating, Ventilation And Air Conditioning
- A/C Compressor
- Maintenance
- Procedures
- Maintenance Procedures
- 01 - Maintenance
- Engine overview
- Service work
- General
- General
- Raising vehicle with hoist and floor jack
- Sticker
- Diagnostic testing unit, connecting
- Vehicle Identification Number (VIN)
- Vehicle data sticker
- Information on time- or distance-dependent service
- Engine code and engine number
- Type plate
- Vehicle lifting mode: switching level control system on and off
- Vehicle lifting mode, switching level control system on and off
- Description of work
- Description of work
- Automatic headlamps: Checking function
- Automatic transmission: Oil level, checking
- Automatic transmission: Check/ change ATF level
- Ball joints: Visual inspection
- Battery: Check battery terminals for secure seating
- Batteries: Check
- Assigning user profiles to ignition key, entering customers name
- Checking tires: Tire condition, wear pattern, inflation pressure, and tread depth
- Brake fluid: Changing
- Brake fluid level (depending on brake pad wear): Check
- Brake system: Visual check for leaks and damage
- Front and rear brake linings: Thickness, checking
- The Communication system
- Electric windows: Check positioning
- Check vehicle key function
- Vehicle system test: Perform
- Changed tire pressure values: Storing in Radio/Navigation Display
- Constant velocity joint boots: Visual inspection
- Transmission supports: Replacing
- Rear lid: lubricate left and right multi-joint hinge
- Dust and pollen filter: Cleaning housing and replacing filter insert
- Ribbed belt: Checking condition
- Cooling system: Check coolant level and freeze protection
- Air cleaner: Cleaning housing and replacing filter insert
- Lower engine cover (noise insulation): Removing and installing
- Engine oil level: Check
- Engine oil: Draining or extracting; changing oil filter and filling engine oil
- Engine and components in engine compartment: Perform visual inspection (from above and below) for leaks and damage
- Perform test drive
- Wheel bolts: Tighten to correct torque setting
- Tire inflation pressure (including spare wheel): Checking, correcting inflation pressures using Tire filler unit VAS 5216 if necessary
- Tire pressure with tire pressure control system: Check
- Tire pressure sensors: Replacing
- Tire repair kit: Checking
- Service interval display: Reset
- Sunroof: Checking function, cleaning and lubricating guide rails
- Windshield wiper blades: Check park position, adjust if necessary
- Windshield wash/wipe system and headlight wash system: Fluid and function, checking
- Power assisted steering: Fluid level, checking
- Headlight adjustment: Check
- Headlamps: Adjusting
- Tie rod ends: Check play, security and joint boots
- Telematics system: Activating and deactivating
- Telematics - 3 buttons: Function overview
- Door arrester: Lubricate
- Underbody protection: Perform visual check for damage
- Guide rollers of the wedge rib belt: Replacing (8-cyl. gasoline engine)
- Camshaft drive toothed belt: Replacing (8-cyl. gasoline engine)
- Radio/Navigation Display Control Module -J503-, units, clock and date
- Radio/Navigation Display Control Module -J503-, Language for text and acoustic output, specifying
- Spark plugs: Replacing
- Drivers and front passenger airbags: Visual check of airbag units
- Climatronic: Setting temperature to 72 F (22 C)
- Valet key: Activating and deactivating
- Suspension transport mode: Activating and deactivating
- Transportation mode: Deactivating
- Windshield wiper blades: Replacing
- 01 - Maintenance
- Maintenance Reminder Light (Reset Procedures)
- Emissions Maintenance Reminder (EGR)
- Emissions Maintenance Reminder (Oxygen Sensor)
- Maintenance Service Reminder
- Notes
- Maintenance Service Reminder Reset - Procedure 01
- Maintenance Service Reminder Reset - Procedure 02
- Maintenance Service Reminder Reset - Procedure 03
- Maintenance Service Reminder Reset - Procedure 04
- Maintenance Service Reminder Reset - Procedure 05
- Maintenance Service Reminder Reset - Procedure 06
- Maintenance Service Reminder Reset - Procedure 07
- Maintenance Service Reminder Reset - Procedure 08
- Maintenance Service Reminder Reset - Procedure 09
- Maintenance Service Reminder Reset - Procedure 10
- Tire Pressure Monitor System Reminder
- Notes
- TPMS Reminder Reset - Procedure 01
- TPMS Reminder Reset - Procedure 02
- TPMS Reminder Reset - Procedure 03
- TPMS Reminder Reset - Procedure 04
- TPMS Reminder Reset - Procedure 05
- TPMS Reminder Reset - Procedure 06
- TPMS Reminder Reset - Procedure 07
- TPMS Reminder Reset - Procedure 08
- TPMS Reminder Reset - Procedure 09
- Maintenance Procedures
- Procedures
- Restraints
- Air Bag, SRS
- Air Bag Restraint Systems
- Description & Operation
- Component Locations
- Servicing
- System Operation Check
- Air Bag Safety Precautions
- Disabling & Activating Air Bag System
- Disposal Procedures
- Post-Collision Inspection
- Removal & Installation
- Notes
- Air Bag Control Module
- Center Console
- Driver-Side Air Bag Module (With Rear Bucket Seats)
- Front Air Bag Crash Sensors
- Front Seat Belt Multi-Part Locking Tongue
- Front Seat Belt PRETENSIONERS
- Front Seats (Without Lap Belt PRETENSIONER)
- Glove Box
- Head Impact Air Bag Modules
- Passenger-Side Air Bag Module
- Rear Air Bag Crash Sensors
- Rear Seat Belt PRETENSIONERS
- Side Air Bag Crash Sensors
- Side Air Bag Modules (Front)
- Side Air Bag Modules (Rear)
- Spiral Spring (With Rear Bucket Seats)
- Steering Wheel
- Torque Specifications
- Diagnostics
- Wiring Diagrams
- Air Bag/SRS Component Inspection & Replacement Tables - EUROPEAN
- Body Interior
- 68 - Interior equipment
- Rearview mirror
- Storage compartments, covers and trim
- Tools
- Center console (4-seater), removing and installing
- Center console (5-seater), removing and installing
- Front ashtray unit, removing and installing
- Storage compartment (front) in center console (4-seater), removing and installing
- Storage compartment (rear) in center console (4-seater), removing and installing
- Cup holder, removing and installing
- Footwell cover (passenger side), removing and installing
- Glove compartment, removing and installing
- Footwell cover (driver side), removing and installing
- Fuse panel cover (driver side), removing and installing
- Instrument panel side covers, removing and installing
- Sun visor, removing and installing
- Grab handles
- 69 - Passenger protection - Airbags, Seat belts
- Seat belts
- Tools
- Safety precautions for belt tensioners
- Disposing of belt tensioner units
- Front seat belt with two belt retractors, removing and installing
- Front seat belt, removing and installing
- Belt height adjuster (electrical), removing and installing
- Belt height adjuster (mechanical), removing and installing
- Front seat belt latch, removing and installing
- Multi-part locking tongue, detaching
- Shoulder and lap belt, connecting
- Rear seat belts (4-seater), removing and installing
- Rear outer seat belts (5-seater), removing and installing
- Rear middle seat belt (5-seater), removing and installing
- Rear belt latch (4-seater), removing and installing
- Rear belt latches (5-seater), removing and installing
- Seat belts, inspecting
- Inspecting child seat anchors (LATCH system Lower Anchors and Tethers for CHildren), after accident
- Airbag
- Location overview: Airbag components
- Safety precautions for work on airbags
- Disposal of airbag units
- Airbag units, deploying prior to disposal
- Airbag units, replacing after an accident
- Airbag control module -J234-, removing and installing
- Driver airbag unit, removing and installing
- Driver airbag unit mounting plate, removing and installing
- Steering wheel, removing and installing
- Passengers side airbag unit, removing and installing
- Side airbags for driver and front passenger, removing and installing
- Driver and passenger side head curtain airbags, removing and installing
- Rear side airbag, removing and installing
- Passenger Occupant Detection System (PODS) (USA only), removing and installing
- Components, adapting
- Crash sensors
- Seat belts
- 70 - Interior trim
- Instrument panel, removing and installing
- Door trim
- Sun shades
- Pillar trim
- Upper A-pillar trim, removing and installing
- Passenger side lower A-pillar trim, removing and installing
- Driver side lower A-pillar trim, removing and installing
- Upper B-pillar trim, removing and installing
- Lower B-pillar trim, removing and installing
- Upper C-pillar trim, removing and installing
- Lower C-pillar trim, removing and installing
- Wheel house trim, removing and installing
- Rear shelf
- Luggage compartment trim
- Roof trim
- 72 - Seat - Frames
- Front seats
- Tools
- Front seat, removing and installing
- Seat trim, removing and installing
- Seat switch assembly, removing and installing
- Seat control module, removing and installing
- Seat longitudinal adjuster, removing and installing
- Drive motor for seat longitudinal adjuster, removing and installing
- Seat inclination adjuster, removing and installing
- Seat height adjuster, removing and installing
- Seat backrest, removing and installing
- Lumbar support, removing and installing
- Seat backrest panel, 18/16-position seat, removing and installing
- Seat backrest panel, 12-way seat, removing and installing
- Seat headrest, removing and installing
- Rear seats
- Tools
- Rear seat cushions, 10-position seat, removing and installing
- Rear seat backrest, 10-position seat, removing and installing
- Seat frame, 10-position seat, removing and installing
- Control module, 10-position seat, removing and installing
- Headrest, 10-position seat, removing and installing
- Rear seat cushion, 5-seater, removing and installing
- Rear seat backrest, 5-seater, removing and installing
- Front seats
- 74 - Seats - Upholstery, Covers
- Front seat covers and upholstery
- Rear seat covers and upholstery
- Tools
- Rear seat cushion cover and padding, 10-position seat, removing and installing
- Rear seat backrest cover and padding, 10-position seat, removing and installing
- Center armrest, 4-seater, removing and installing
- Rear seat cushion cover and padding, 5-seater, removing and installing
- Rear seat backrest cover and padding, 5-seater, removing and installing
- Center armrest, 5-seater, removing and installing
- Cupholder in center armrest, 5-seater, removing and installing
- Center headrest, 5-seater, removing and installing
- Rear seat heating elements, replacing
- 76 - Gas, water, electricity
- 68 - Interior equipment
- Air Bag Restraint Systems
- Passive Restraints
- Body Interior
- 68 - Interior equipment
- Rearview mirror
- Storage compartments, covers and trim
- Tools
- Center console (4-seater), removing and installing
- Center console (5-seater), removing and installing
- Front ashtray unit, removing and installing
- Storage compartment (front) in center console (4-seater), removing and installing
- Storage compartment (rear) in center console (4-seater), removing and installing
- Cup holder, removing and installing
- Footwell cover (passenger side), removing and installing
- Glove compartment, removing and installing
- Footwell cover (driver side), removing and installing
- Fuse panel cover (driver side), removing and installing
- Instrument panel side covers, removing and installing
- Sun visor, removing and installing
- Grab handles
- 69 - Passenger protection - Airbags, Seat belts
- Seat belts
- Tools
- Safety precautions for belt tensioners
- Disposing of belt tensioner units
- Front seat belt with two belt retractors, removing and installing
- Front seat belt, removing and installing
- Belt height adjuster (electrical), removing and installing
- Belt height adjuster (mechanical), removing and installing
- Front seat belt latch, removing and installing
- Multi-part locking tongue, detaching
- Shoulder and lap belt, connecting
- Rear seat belts (4-seater), removing and installing
- Rear outer seat belts (5-seater), removing and installing
- Rear middle seat belt (5-seater), removing and installing
- Rear belt latch (4-seater), removing and installing
- Rear belt latches (5-seater), removing and installing
- Seat belts, inspecting
- Inspecting child seat anchors (LATCH system Lower Anchors and Tethers for CHildren), after accident
- Airbag
- Location overview: Airbag components
- Safety precautions for work on airbags
- Disposal of airbag units
- Airbag units, deploying prior to disposal
- Airbag units, replacing after an accident
- Airbag control module -J234-, removing and installing
- Driver airbag unit, removing and installing
- Driver airbag unit mounting plate, removing and installing
- Steering wheel, removing and installing
- Passengers side airbag unit, removing and installing
- Side airbags for driver and front passenger, removing and installing
- Driver and passenger side head curtain airbags, removing and installing
- Rear side airbag, removing and installing
- Passenger Occupant Detection System (PODS) (USA only), removing and installing
- Components, adapting
- Crash sensors
- Seat belts
- 70 - Interior trim
- Instrument panel, removing and installing
- Door trim
- Sun shades
- Pillar trim
- Upper A-pillar trim, removing and installing
- Passenger side lower A-pillar trim, removing and installing
- Driver side lower A-pillar trim, removing and installing
- Upper B-pillar trim, removing and installing
- Lower B-pillar trim, removing and installing
- Upper C-pillar trim, removing and installing
- Lower C-pillar trim, removing and installing
- Wheel house trim, removing and installing
- Rear shelf
- Luggage compartment trim
- Roof trim
- 72 - Seat - Frames
- Front seats
- Tools
- Front seat, removing and installing
- Seat trim, removing and installing
- Seat switch assembly, removing and installing
- Seat control module, removing and installing
- Seat longitudinal adjuster, removing and installing
- Drive motor for seat longitudinal adjuster, removing and installing
- Seat inclination adjuster, removing and installing
- Seat height adjuster, removing and installing
- Seat backrest, removing and installing
- Lumbar support, removing and installing
- Seat backrest panel, 18/16-position seat, removing and installing
- Seat backrest panel, 12-way seat, removing and installing
- Seat headrest, removing and installing
- Rear seats
- Tools
- Rear seat cushions, 10-position seat, removing and installing
- Rear seat backrest, 10-position seat, removing and installing
- Seat frame, 10-position seat, removing and installing
- Control module, 10-position seat, removing and installing
- Headrest, 10-position seat, removing and installing
- Rear seat cushion, 5-seater, removing and installing
- Rear seat backrest, 5-seater, removing and installing
- Front seats
- 74 - Seats - Upholstery, Covers
- Front seat covers and upholstery
- Rear seat covers and upholstery
- Tools
- Rear seat cushion cover and padding, 10-position seat, removing and installing
- Rear seat backrest cover and padding, 10-position seat, removing and installing
- Center armrest, 4-seater, removing and installing
- Rear seat cushion cover and padding, 5-seater, removing and installing
- Rear seat backrest cover and padding, 5-seater, removing and installing
- Center armrest, 5-seater, removing and installing
- Cupholder in center armrest, 5-seater, removing and installing
- Center headrest, 5-seater, removing and installing
- Rear seat heating elements, replacing
- 76 - Gas, water, electricity
- 68 - Interior equipment
- Body Interior
- Restraints Control Systems
- Seat Belts
- Air Bag, SRS
- Steering
- Manual Steering
- Suspension, Wheels, Steering
- 00 - General, Technical Data
- 40 - Front Suspension
- Front Suspension, Servicing
- Front Suspension Components, Assembly Overview
- Notes
- Air Spring Damper, Removing and Installing
- Air Spring Damper, Filling
- Mounting Bracket, Removing and Installing
- Upper Control Arm, Removing and Installing
- Upper Control Arm Bonded Rubber Bushing, Replacing
- Wheel Bearing Housing, Removing and Installing
- Wheel Bearing, Assembly Overview
- Wheel Bearing Unit, Removing and Installing
- Subframe, Lower Link and Stabilizer Bar, Assembly Overview
- Notes
- Subframe, Removing and Installing
- Subframe, Front Rubber Bonded Bushings, Replacing
- Subframe, Rear Rubber Bonded Bushing, Replacing
- Subframe, Rear Hydraulic Rubber Bonded Bushing, Replacing
- Stabilizer Bar, Removing and Installing
- Track Control Arm, Removing and Installing
- Guide Link, Removing and Installing
- Drive Axle, Overview
- I - Drive Axle with Triple Roller Joint AAR 2900, Assembly Overview
- II - Drive Axle with Peened Triple Roller Joint AAR 3300i, Assembly Overview
- 42 - Rear Suspension
- Rear Axle, Servicing
- I - Subframe, Assembly Overview
- II - Control Arm, Tie Rod and Air Spring Damper, Assembly Overview
- Notes
- Air Spring Damper, Removing and Installing
- Air Spring Damper, Filling
- Stabilizer Bar, Removing and Installing
- Upper Control Arm, Removing and Installing
- Tie Rod, Removing and Installing
- Stabilizer Bar to Lower Control Arm Connecting Links, Removing and Installing
- Tie Rod to Lower Control Arm Connecting Links, Removing and Installing
- Lower Control Arm, Removing and Installing
- III - Wheel Bearing, Assembly Overview
- IV - Drive Axle, Assembly Overview
- Drive Axle, Servicing
- 43 - Self Leveling Suspension
- Vehicle Lift Mode
- Self-Leveling Suspension, Servicing
- Notes
- Air Spring Damper and Self-Leveling Suspension, Fault Finding
- Self-Leveling Suspension, Components Locations
- Level Control System Control Module, Removing and Installing
- Front Level Control System Sensors, Removing and Installing
- Front Wheel Acceleration Sensors, Removing and Installing
- Front Body Acceleration Sensor, Removing and Installing
- Rear Level Control System Sensors, Removing and Installing
- Rear Wheel Acceleration Sensors, Removing and Installing
- Rear Body Acceleration Sensor, Removing and Installing
- Air Hose, Servicing
- Air Supply Unit with Solenoid Valve Block, Assembly Overview
- Air Supply Unit, Removing and Installing
- Solenoid Valve Block, Line Arrangement
- Solenoid Valve, Removing and Installing
- Self-Leveling Suspension, Basic Setting
- Ride Height, Measuring
- 44 - Wheels, Tires, Wheel Alignment
- Wheel Bolts, Tightening Specifications
- Wheel Alignment
- Notes
- Wheel Alignment, General Information
- Electronic Stabilization Program
- Vehicle Data Label
- Test Prerequisites
- Measurement Preparations
- Rim Run-Out Compensation
- Vehicle Alignment, Overview
- Wheel Alignment Specifications
- Front Axle Camber, Centering
- Rear Axle Camber, Adjusting
- Rear Axle Toe, Adjusting
- Front Axle Toe, Adjusting
- Vehicle, Raising
- Toe Constant S, Adjusting
- Spring Blocks, Installing
- Tire Pressure Monitoring, Generation 1, Servicing
- Tire Pressure Monitoring, Generation 2, Servicing
- Notes
- Tire Pressure Monitoring, Component Overview
- Tire Pressure Sensor and Metal Valve, Component Overview
- Tire Pressure Sensor, Removing and Installing
- Metal Valve, Removing and Installing
- Left Front Tire Pressure Monitoring Transmitter, Removing and Installing
- Right Front Tire Pressure Monitoring Transmitter, Removing and Installing
- Left Rear Tire Pressure Monitoring Transmitter, Removing and Installing
- Right Rear Tire Pressure Monitoring Transmitter, Removing and Installing
- Tire Pressure Monitoring Antenna, Removing and Installing
- Tire Pressure Monitoring Control Module, Removing and Installing
- Tires, Wheels with Tire Pressure Monitoring, Mounting
- Wheels and Tires
- Adaptive Cruise Control
- Adaptive Cruise Control, Calibration
- 48 - Steering
- Steering Column
- Steering Gear, Assembly Overview
- Power Steering, Servicing
- Power Steering Pump
- Notes
- Power Steering Pump, 8-Cylinder, Checking Supply Pressure
- Power Steering Pump, 8-Cylinder, Assembly Overview
- Power Steering Pump, 8-Cylinder, Removing and Installing
- Power Steering Pump, W12 Engine, Checking Supply Pressure
- Power Steering Pump, W12 Engine, Assembly Overview
- Power Steering Pump, W12 Engine, Removing and Installing
- Power Steering Fluid Level, Checking
- Steering System, Bleeding
- Steering System, Checking for Leaks
- Suspension, Wheels, Steering
- Power Steering
- Suspension, Wheels, Steering
- 00 - General, Technical Data
- 40 - Front Suspension
- Front Suspension, Servicing
- Front Suspension Components, Assembly Overview
- Notes
- Air Spring Damper, Removing and Installing
- Air Spring Damper, Filling
- Mounting Bracket, Removing and Installing
- Upper Control Arm, Removing and Installing
- Upper Control Arm Bonded Rubber Bushing, Replacing
- Wheel Bearing Housing, Removing and Installing
- Wheel Bearing, Assembly Overview
- Wheel Bearing Unit, Removing and Installing
- Subframe, Lower Link and Stabilizer Bar, Assembly Overview
- Notes
- Subframe, Removing and Installing
- Subframe, Front Rubber Bonded Bushings, Replacing
- Subframe, Rear Rubber Bonded Bushing, Replacing
- Subframe, Rear Hydraulic Rubber Bonded Bushing, Replacing
- Stabilizer Bar, Removing and Installing
- Track Control Arm, Removing and Installing
- Guide Link, Removing and Installing
- Drive Axle, Overview
- I - Drive Axle with Triple Roller Joint AAR 2900, Assembly Overview
- II - Drive Axle with Peened Triple Roller Joint AAR 3300i, Assembly Overview
- 42 - Rear Suspension
- Rear Axle, Servicing
- I - Subframe, Assembly Overview
- II - Control Arm, Tie Rod and Air Spring Damper, Assembly Overview
- Notes
- Air Spring Damper, Removing and Installing
- Air Spring Damper, Filling
- Stabilizer Bar, Removing and Installing
- Upper Control Arm, Removing and Installing
- Tie Rod, Removing and Installing
- Stabilizer Bar to Lower Control Arm Connecting Links, Removing and Installing
- Tie Rod to Lower Control Arm Connecting Links, Removing and Installing
- Lower Control Arm, Removing and Installing
- III - Wheel Bearing, Assembly Overview
- IV - Drive Axle, Assembly Overview
- Drive Axle, Servicing
- 43 - Self Leveling Suspension
- Vehicle Lift Mode
- Self-Leveling Suspension, Servicing
- Notes
- Air Spring Damper and Self-Leveling Suspension, Fault Finding
- Self-Leveling Suspension, Components Locations
- Level Control System Control Module, Removing and Installing
- Front Level Control System Sensors, Removing and Installing
- Front Wheel Acceleration Sensors, Removing and Installing
- Front Body Acceleration Sensor, Removing and Installing
- Rear Level Control System Sensors, Removing and Installing
- Rear Wheel Acceleration Sensors, Removing and Installing
- Rear Body Acceleration Sensor, Removing and Installing
- Air Hose, Servicing
- Air Supply Unit with Solenoid Valve Block, Assembly Overview
- Air Supply Unit, Removing and Installing
- Solenoid Valve Block, Line Arrangement
- Solenoid Valve, Removing and Installing
- Self-Leveling Suspension, Basic Setting
- Ride Height, Measuring
- 44 - Wheels, Tires, Wheel Alignment
- Wheel Bolts, Tightening Specifications
- Wheel Alignment
- Notes
- Wheel Alignment, General Information
- Electronic Stabilization Program
- Vehicle Data Label
- Test Prerequisites
- Measurement Preparations
- Rim Run-Out Compensation
- Vehicle Alignment, Overview
- Wheel Alignment Specifications
- Front Axle Camber, Centering
- Rear Axle Camber, Adjusting
- Rear Axle Toe, Adjusting
- Front Axle Toe, Adjusting
- Vehicle, Raising
- Toe Constant S, Adjusting
- Spring Blocks, Installing
- Tire Pressure Monitoring, Generation 1, Servicing
- Tire Pressure Monitoring, Generation 2, Servicing
- Notes
- Tire Pressure Monitoring, Component Overview
- Tire Pressure Sensor and Metal Valve, Component Overview
- Tire Pressure Sensor, Removing and Installing
- Metal Valve, Removing and Installing
- Left Front Tire Pressure Monitoring Transmitter, Removing and Installing
- Right Front Tire Pressure Monitoring Transmitter, Removing and Installing
- Left Rear Tire Pressure Monitoring Transmitter, Removing and Installing
- Right Rear Tire Pressure Monitoring Transmitter, Removing and Installing
- Tire Pressure Monitoring Antenna, Removing and Installing
- Tire Pressure Monitoring Control Module, Removing and Installing
- Tires, Wheels with Tire Pressure Monitoring, Mounting
- Wheels and Tires
- Adaptive Cruise Control
- Adaptive Cruise Control, Calibration
- 48 - Steering
- Steering Column
- Steering Gear, Assembly Overview
- Power Steering, Servicing
- Power Steering Pump
- Notes
- Power Steering Pump, 8-Cylinder, Checking Supply Pressure
- Power Steering Pump, 8-Cylinder, Assembly Overview
- Power Steering Pump, 8-Cylinder, Removing and Installing
- Power Steering Pump, W12 Engine, Checking Supply Pressure
- Power Steering Pump, W12 Engine, Assembly Overview
- Power Steering Pump, W12 Engine, Removing and Installing
- Power Steering Fluid Level, Checking
- Steering System, Bleeding
- Steering System, Checking for Leaks
- Suspension, Wheels, Steering
- Steering Column
- Suspension, Wheels, Steering
- 00 - General, Technical Data
- 40 - Front Suspension
- Front Suspension, Servicing
- Front Suspension Components, Assembly Overview
- Notes
- Air Spring Damper, Removing and Installing
- Air Spring Damper, Filling
- Mounting Bracket, Removing and Installing
- Upper Control Arm, Removing and Installing
- Upper Control Arm Bonded Rubber Bushing, Replacing
- Wheel Bearing Housing, Removing and Installing
- Wheel Bearing, Assembly Overview
- Wheel Bearing Unit, Removing and Installing
- Subframe, Lower Link and Stabilizer Bar, Assembly Overview
- Notes
- Subframe, Removing and Installing
- Subframe, Front Rubber Bonded Bushings, Replacing
- Subframe, Rear Rubber Bonded Bushing, Replacing
- Subframe, Rear Hydraulic Rubber Bonded Bushing, Replacing
- Stabilizer Bar, Removing and Installing
- Track Control Arm, Removing and Installing
- Guide Link, Removing and Installing
- Drive Axle, Overview
- I - Drive Axle with Triple Roller Joint AAR 2900, Assembly Overview
- II - Drive Axle with Peened Triple Roller Joint AAR 3300i, Assembly Overview
- 42 - Rear Suspension
- Rear Axle, Servicing
- I - Subframe, Assembly Overview
- II - Control Arm, Tie Rod and Air Spring Damper, Assembly Overview
- Notes
- Air Spring Damper, Removing and Installing
- Air Spring Damper, Filling
- Stabilizer Bar, Removing and Installing
- Upper Control Arm, Removing and Installing
- Tie Rod, Removing and Installing
- Stabilizer Bar to Lower Control Arm Connecting Links, Removing and Installing
- Tie Rod to Lower Control Arm Connecting Links, Removing and Installing
- Lower Control Arm, Removing and Installing
- III - Wheel Bearing, Assembly Overview
- IV - Drive Axle, Assembly Overview
- Drive Axle, Servicing
- 43 - Self Leveling Suspension
- Vehicle Lift Mode
- Self-Leveling Suspension, Servicing
- Notes
- Air Spring Damper and Self-Leveling Suspension, Fault Finding
- Self-Leveling Suspension, Components Locations
- Level Control System Control Module, Removing and Installing
- Front Level Control System Sensors, Removing and Installing
- Front Wheel Acceleration Sensors, Removing and Installing
- Front Body Acceleration Sensor, Removing and Installing
- Rear Level Control System Sensors, Removing and Installing
- Rear Wheel Acceleration Sensors, Removing and Installing
- Rear Body Acceleration Sensor, Removing and Installing
- Air Hose, Servicing
- Air Supply Unit with Solenoid Valve Block, Assembly Overview
- Air Supply Unit, Removing and Installing
- Solenoid Valve Block, Line Arrangement
- Solenoid Valve, Removing and Installing
- Self-Leveling Suspension, Basic Setting
- Ride Height, Measuring
- 44 - Wheels, Tires, Wheel Alignment
- Wheel Bolts, Tightening Specifications
- Wheel Alignment
- Notes
- Wheel Alignment, General Information
- Electronic Stabilization Program
- Vehicle Data Label
- Test Prerequisites
- Measurement Preparations
- Rim Run-Out Compensation
- Vehicle Alignment, Overview
- Wheel Alignment Specifications
- Front Axle Camber, Centering
- Rear Axle Camber, Adjusting
- Rear Axle Toe, Adjusting
- Front Axle Toe, Adjusting
- Vehicle, Raising
- Toe Constant S, Adjusting
- Spring Blocks, Installing
- Tire Pressure Monitoring, Generation 1, Servicing
- Tire Pressure Monitoring, Generation 2, Servicing
- Notes
- Tire Pressure Monitoring, Component Overview
- Tire Pressure Sensor and Metal Valve, Component Overview
- Tire Pressure Sensor, Removing and Installing
- Metal Valve, Removing and Installing
- Left Front Tire Pressure Monitoring Transmitter, Removing and Installing
- Right Front Tire Pressure Monitoring Transmitter, Removing and Installing
- Left Rear Tire Pressure Monitoring Transmitter, Removing and Installing
- Right Rear Tire Pressure Monitoring Transmitter, Removing and Installing
- Tire Pressure Monitoring Antenna, Removing and Installing
- Tire Pressure Monitoring Control Module, Removing and Installing
- Tires, Wheels with Tire Pressure Monitoring, Mounting
- Wheels and Tires
- Adaptive Cruise Control
- Adaptive Cruise Control, Calibration
- 48 - Steering
- Steering Column
- Steering Gear, Assembly Overview
- Power Steering, Servicing
- Power Steering Pump
- Notes
- Power Steering Pump, 8-Cylinder, Checking Supply Pressure
- Power Steering Pump, 8-Cylinder, Assembly Overview
- Power Steering Pump, 8-Cylinder, Removing and Installing
- Power Steering Pump, W12 Engine, Checking Supply Pressure
- Power Steering Pump, W12 Engine, Assembly Overview
- Power Steering Pump, W12 Engine, Removing and Installing
- Power Steering Fluid Level, Checking
- Steering System, Bleeding
- Steering System, Checking for Leaks
- Suspension, Wheels, Steering
- Steering Gear
- Suspension, Wheels, Steering
- 00 - General, Technical Data
- 40 - Front Suspension
- Front Suspension, Servicing
- Front Suspension Components, Assembly Overview
- Notes
- Air Spring Damper, Removing and Installing
- Air Spring Damper, Filling
- Mounting Bracket, Removing and Installing
- Upper Control Arm, Removing and Installing
- Upper Control Arm Bonded Rubber Bushing, Replacing
- Wheel Bearing Housing, Removing and Installing
- Wheel Bearing, Assembly Overview
- Wheel Bearing Unit, Removing and Installing
- Subframe, Lower Link and Stabilizer Bar, Assembly Overview
- Notes
- Subframe, Removing and Installing
- Subframe, Front Rubber Bonded Bushings, Replacing
- Subframe, Rear Rubber Bonded Bushing, Replacing
- Subframe, Rear Hydraulic Rubber Bonded Bushing, Replacing
- Stabilizer Bar, Removing and Installing
- Track Control Arm, Removing and Installing
- Guide Link, Removing and Installing
- Drive Axle, Overview
- I - Drive Axle with Triple Roller Joint AAR 2900, Assembly Overview
- II - Drive Axle with Peened Triple Roller Joint AAR 3300i, Assembly Overview
- 42 - Rear Suspension
- Rear Axle, Servicing
- I - Subframe, Assembly Overview
- II - Control Arm, Tie Rod and Air Spring Damper, Assembly Overview
- Notes
- Air Spring Damper, Removing and Installing
- Air Spring Damper, Filling
- Stabilizer Bar, Removing and Installing
- Upper Control Arm, Removing and Installing
- Tie Rod, Removing and Installing
- Stabilizer Bar to Lower Control Arm Connecting Links, Removing and Installing
- Tie Rod to Lower Control Arm Connecting Links, Removing and Installing
- Lower Control Arm, Removing and Installing
- III - Wheel Bearing, Assembly Overview
- IV - Drive Axle, Assembly Overview
- Drive Axle, Servicing
- 43 - Self Leveling Suspension
- Vehicle Lift Mode
- Self-Leveling Suspension, Servicing
- Notes
- Air Spring Damper and Self-Leveling Suspension, Fault Finding
- Self-Leveling Suspension, Components Locations
- Level Control System Control Module, Removing and Installing
- Front Level Control System Sensors, Removing and Installing
- Front Wheel Acceleration Sensors, Removing and Installing
- Front Body Acceleration Sensor, Removing and Installing
- Rear Level Control System Sensors, Removing and Installing
- Rear Wheel Acceleration Sensors, Removing and Installing
- Rear Body Acceleration Sensor, Removing and Installing
- Air Hose, Servicing
- Air Supply Unit with Solenoid Valve Block, Assembly Overview
- Air Supply Unit, Removing and Installing
- Solenoid Valve Block, Line Arrangement
- Solenoid Valve, Removing and Installing
- Self-Leveling Suspension, Basic Setting
- Ride Height, Measuring
- 44 - Wheels, Tires, Wheel Alignment
- Wheel Bolts, Tightening Specifications
- Wheel Alignment
- Notes
- Wheel Alignment, General Information
- Electronic Stabilization Program
- Vehicle Data Label
- Test Prerequisites
- Measurement Preparations
- Rim Run-Out Compensation
- Vehicle Alignment, Overview
- Wheel Alignment Specifications
- Front Axle Camber, Centering
- Rear Axle Camber, Adjusting
- Rear Axle Toe, Adjusting
- Front Axle Toe, Adjusting
- Vehicle, Raising
- Toe Constant S, Adjusting
- Spring Blocks, Installing
- Tire Pressure Monitoring, Generation 1, Servicing
- Tire Pressure Monitoring, Generation 2, Servicing
- Notes
- Tire Pressure Monitoring, Component Overview
- Tire Pressure Sensor and Metal Valve, Component Overview
- Tire Pressure Sensor, Removing and Installing
- Metal Valve, Removing and Installing
- Left Front Tire Pressure Monitoring Transmitter, Removing and Installing
- Right Front Tire Pressure Monitoring Transmitter, Removing and Installing
- Left Rear Tire Pressure Monitoring Transmitter, Removing and Installing
- Right Rear Tire Pressure Monitoring Transmitter, Removing and Installing
- Tire Pressure Monitoring Antenna, Removing and Installing
- Tire Pressure Monitoring Control Module, Removing and Installing
- Tires, Wheels with Tire Pressure Monitoring, Mounting
- Wheels and Tires
- Adaptive Cruise Control
- Adaptive Cruise Control, Calibration
- 48 - Steering
- Steering Column
- Steering Gear, Assembly Overview
- Power Steering, Servicing
- Power Steering Pump
- Notes
- Power Steering Pump, 8-Cylinder, Checking Supply Pressure
- Power Steering Pump, 8-Cylinder, Assembly Overview
- Power Steering Pump, 8-Cylinder, Removing and Installing
- Power Steering Pump, W12 Engine, Checking Supply Pressure
- Power Steering Pump, W12 Engine, Assembly Overview
- Power Steering Pump, W12 Engine, Removing and Installing
- Power Steering Fluid Level, Checking
- Steering System, Bleeding
- Steering System, Checking for Leaks
- Suspension, Wheels, Steering
- Steering Linkage
- Suspension, Wheels, Steering
- 00 - General, Technical Data
- 40 - Front Suspension
- Front Suspension, Servicing
- Front Suspension Components, Assembly Overview
- Notes
- Air Spring Damper, Removing and Installing
- Air Spring Damper, Filling
- Mounting Bracket, Removing and Installing
- Upper Control Arm, Removing and Installing
- Upper Control Arm Bonded Rubber Bushing, Replacing
- Wheel Bearing Housing, Removing and Installing
- Wheel Bearing, Assembly Overview
- Wheel Bearing Unit, Removing and Installing
- Subframe, Lower Link and Stabilizer Bar, Assembly Overview
- Notes
- Subframe, Removing and Installing
- Subframe, Front Rubber Bonded Bushings, Replacing
- Subframe, Rear Rubber Bonded Bushing, Replacing
- Subframe, Rear Hydraulic Rubber Bonded Bushing, Replacing
- Stabilizer Bar, Removing and Installing
- Track Control Arm, Removing and Installing
- Guide Link, Removing and Installing
- Drive Axle, Overview
- I - Drive Axle with Triple Roller Joint AAR 2900, Assembly Overview
- II - Drive Axle with Peened Triple Roller Joint AAR 3300i, Assembly Overview
- 42 - Rear Suspension
- Rear Axle, Servicing
- I - Subframe, Assembly Overview
- II - Control Arm, Tie Rod and Air Spring Damper, Assembly Overview
- Notes
- Air Spring Damper, Removing and Installing
- Air Spring Damper, Filling
- Stabilizer Bar, Removing and Installing
- Upper Control Arm, Removing and Installing
- Tie Rod, Removing and Installing
- Stabilizer Bar to Lower Control Arm Connecting Links, Removing and Installing
- Tie Rod to Lower Control Arm Connecting Links, Removing and Installing
- Lower Control Arm, Removing and Installing
- III - Wheel Bearing, Assembly Overview
- IV - Drive Axle, Assembly Overview
- Drive Axle, Servicing
- 43 - Self Leveling Suspension
- Vehicle Lift Mode
- Self-Leveling Suspension, Servicing
- Notes
- Air Spring Damper and Self-Leveling Suspension, Fault Finding
- Self-Leveling Suspension, Components Locations
- Level Control System Control Module, Removing and Installing
- Front Level Control System Sensors, Removing and Installing
- Front Wheel Acceleration Sensors, Removing and Installing
- Front Body Acceleration Sensor, Removing and Installing
- Rear Level Control System Sensors, Removing and Installing
- Rear Wheel Acceleration Sensors, Removing and Installing
- Rear Body Acceleration Sensor, Removing and Installing
- Air Hose, Servicing
- Air Supply Unit with Solenoid Valve Block, Assembly Overview
- Air Supply Unit, Removing and Installing
- Solenoid Valve Block, Line Arrangement
- Solenoid Valve, Removing and Installing
- Self-Leveling Suspension, Basic Setting
- Ride Height, Measuring
- 44 - Wheels, Tires, Wheel Alignment
- Wheel Bolts, Tightening Specifications
- Wheel Alignment
- Notes
- Wheel Alignment, General Information
- Electronic Stabilization Program
- Vehicle Data Label
- Test Prerequisites
- Measurement Preparations
- Rim Run-Out Compensation
- Vehicle Alignment, Overview
- Wheel Alignment Specifications
- Front Axle Camber, Centering
- Rear Axle Camber, Adjusting
- Rear Axle Toe, Adjusting
- Front Axle Toe, Adjusting
- Vehicle, Raising
- Toe Constant S, Adjusting
- Spring Blocks, Installing
- Tire Pressure Monitoring, Generation 1, Servicing
- Tire Pressure Monitoring, Generation 2, Servicing
- Notes
- Tire Pressure Monitoring, Component Overview
- Tire Pressure Sensor and Metal Valve, Component Overview
- Tire Pressure Sensor, Removing and Installing
- Metal Valve, Removing and Installing
- Left Front Tire Pressure Monitoring Transmitter, Removing and Installing
- Right Front Tire Pressure Monitoring Transmitter, Removing and Installing
- Left Rear Tire Pressure Monitoring Transmitter, Removing and Installing
- Right Rear Tire Pressure Monitoring Transmitter, Removing and Installing
- Tire Pressure Monitoring Antenna, Removing and Installing
- Tire Pressure Monitoring Control Module, Removing and Installing
- Tires, Wheels with Tire Pressure Monitoring, Mounting
- Wheels and Tires
- Adaptive Cruise Control
- Adaptive Cruise Control, Calibration
- 48 - Steering
- Steering Column
- Steering Gear, Assembly Overview
- Power Steering, Servicing
- Power Steering Pump
- Notes
- Power Steering Pump, 8-Cylinder, Checking Supply Pressure
- Power Steering Pump, 8-Cylinder, Assembly Overview
- Power Steering Pump, 8-Cylinder, Removing and Installing
- Power Steering Pump, W12 Engine, Checking Supply Pressure
- Power Steering Pump, W12 Engine, Assembly Overview
- Power Steering Pump, W12 Engine, Removing and Installing
- Power Steering Fluid Level, Checking
- Steering System, Bleeding
- Steering System, Checking for Leaks
- Suspension, Wheels, Steering
- Manual Steering
- Suspension
- Electronic Suspension
- Suspension, Wheels, Steering
- 00 - General, Technical Data
- 40 - Front Suspension
- Front Suspension, Servicing
- Front Suspension Components, Assembly Overview
- Notes
- Air Spring Damper, Removing and Installing
- Air Spring Damper, Filling
- Mounting Bracket, Removing and Installing
- Upper Control Arm, Removing and Installing
- Upper Control Arm Bonded Rubber Bushing, Replacing
- Wheel Bearing Housing, Removing and Installing
- Wheel Bearing, Assembly Overview
- Wheel Bearing Unit, Removing and Installing
- Subframe, Lower Link and Stabilizer Bar, Assembly Overview
- Notes
- Subframe, Removing and Installing
- Subframe, Front Rubber Bonded Bushings, Replacing
- Subframe, Rear Rubber Bonded Bushing, Replacing
- Subframe, Rear Hydraulic Rubber Bonded Bushing, Replacing
- Stabilizer Bar, Removing and Installing
- Track Control Arm, Removing and Installing
- Guide Link, Removing and Installing
- Drive Axle, Overview
- I - Drive Axle with Triple Roller Joint AAR 2900, Assembly Overview
- II - Drive Axle with Peened Triple Roller Joint AAR 3300i, Assembly Overview
- 42 - Rear Suspension
- Rear Axle, Servicing
- I - Subframe, Assembly Overview
- II - Control Arm, Tie Rod and Air Spring Damper, Assembly Overview
- Notes
- Air Spring Damper, Removing and Installing
- Air Spring Damper, Filling
- Stabilizer Bar, Removing and Installing
- Upper Control Arm, Removing and Installing
- Tie Rod, Removing and Installing
- Stabilizer Bar to Lower Control Arm Connecting Links, Removing and Installing
- Tie Rod to Lower Control Arm Connecting Links, Removing and Installing
- Lower Control Arm, Removing and Installing
- III - Wheel Bearing, Assembly Overview
- IV - Drive Axle, Assembly Overview
- Drive Axle, Servicing
- 43 - Self Leveling Suspension
- Vehicle Lift Mode
- Self-Leveling Suspension, Servicing
- Notes
- Air Spring Damper and Self-Leveling Suspension, Fault Finding
- Self-Leveling Suspension, Components Locations
- Level Control System Control Module, Removing and Installing
- Front Level Control System Sensors, Removing and Installing
- Front Wheel Acceleration Sensors, Removing and Installing
- Front Body Acceleration Sensor, Removing and Installing
- Rear Level Control System Sensors, Removing and Installing
- Rear Wheel Acceleration Sensors, Removing and Installing
- Rear Body Acceleration Sensor, Removing and Installing
- Air Hose, Servicing
- Air Supply Unit with Solenoid Valve Block, Assembly Overview
- Air Supply Unit, Removing and Installing
- Solenoid Valve Block, Line Arrangement
- Solenoid Valve, Removing and Installing
- Self-Leveling Suspension, Basic Setting
- Ride Height, Measuring
- 44 - Wheels, Tires, Wheel Alignment
- Wheel Bolts, Tightening Specifications
- Wheel Alignment
- Notes
- Wheel Alignment, General Information
- Electronic Stabilization Program
- Vehicle Data Label
- Test Prerequisites
- Measurement Preparations
- Rim Run-Out Compensation
- Vehicle Alignment, Overview
- Wheel Alignment Specifications
- Front Axle Camber, Centering
- Rear Axle Camber, Adjusting
- Rear Axle Toe, Adjusting
- Front Axle Toe, Adjusting
- Vehicle, Raising
- Toe Constant S, Adjusting
- Spring Blocks, Installing
- Tire Pressure Monitoring, Generation 1, Servicing
- Tire Pressure Monitoring, Generation 2, Servicing
- Notes
- Tire Pressure Monitoring, Component Overview
- Tire Pressure Sensor and Metal Valve, Component Overview
- Tire Pressure Sensor, Removing and Installing
- Metal Valve, Removing and Installing
- Left Front Tire Pressure Monitoring Transmitter, Removing and Installing
- Right Front Tire Pressure Monitoring Transmitter, Removing and Installing
- Left Rear Tire Pressure Monitoring Transmitter, Removing and Installing
- Right Rear Tire Pressure Monitoring Transmitter, Removing and Installing
- Tire Pressure Monitoring Antenna, Removing and Installing
- Tire Pressure Monitoring Control Module, Removing and Installing
- Tires, Wheels with Tire Pressure Monitoring, Mounting
- Wheels and Tires
- Adaptive Cruise Control
- Adaptive Cruise Control, Calibration
- 48 - Steering
- Steering Column
- Steering Gear, Assembly Overview
- Power Steering, Servicing
- Power Steering Pump
- Notes
- Power Steering Pump, 8-Cylinder, Checking Supply Pressure
- Power Steering Pump, 8-Cylinder, Assembly Overview
- Power Steering Pump, 8-Cylinder, Removing and Installing
- Power Steering Pump, W12 Engine, Checking Supply Pressure
- Power Steering Pump, W12 Engine, Assembly Overview
- Power Steering Pump, W12 Engine, Removing and Installing
- Power Steering Fluid Level, Checking
- Steering System, Bleeding
- Steering System, Checking for Leaks
- Suspension, Wheels, Steering
- Front Suspension
- Suspension, Wheels, Steering
- 00 - General, Technical Data
- 40 - Front Suspension
- Front Suspension, Servicing
- Front Suspension Components, Assembly Overview
- Notes
- Air Spring Damper, Removing and Installing
- Air Spring Damper, Filling
- Mounting Bracket, Removing and Installing
- Upper Control Arm, Removing and Installing
- Upper Control Arm Bonded Rubber Bushing, Replacing
- Wheel Bearing Housing, Removing and Installing
- Wheel Bearing, Assembly Overview
- Wheel Bearing Unit, Removing and Installing
- Subframe, Lower Link and Stabilizer Bar, Assembly Overview
- Notes
- Subframe, Removing and Installing
- Subframe, Front Rubber Bonded Bushings, Replacing
- Subframe, Rear Rubber Bonded Bushing, Replacing
- Subframe, Rear Hydraulic Rubber Bonded Bushing, Replacing
- Stabilizer Bar, Removing and Installing
- Track Control Arm, Removing and Installing
- Guide Link, Removing and Installing
- Drive Axle, Overview
- I - Drive Axle with Triple Roller Joint AAR 2900, Assembly Overview
- II - Drive Axle with Peened Triple Roller Joint AAR 3300i, Assembly Overview
- 42 - Rear Suspension
- Rear Axle, Servicing
- I - Subframe, Assembly Overview
- II - Control Arm, Tie Rod and Air Spring Damper, Assembly Overview
- Notes
- Air Spring Damper, Removing and Installing
- Air Spring Damper, Filling
- Stabilizer Bar, Removing and Installing
- Upper Control Arm, Removing and Installing
- Tie Rod, Removing and Installing
- Stabilizer Bar to Lower Control Arm Connecting Links, Removing and Installing
- Tie Rod to Lower Control Arm Connecting Links, Removing and Installing
- Lower Control Arm, Removing and Installing
- III - Wheel Bearing, Assembly Overview
- IV - Drive Axle, Assembly Overview
- Drive Axle, Servicing
- 43 - Self Leveling Suspension
- Vehicle Lift Mode
- Self-Leveling Suspension, Servicing
- Notes
- Air Spring Damper and Self-Leveling Suspension, Fault Finding
- Self-Leveling Suspension, Components Locations
- Level Control System Control Module, Removing and Installing
- Front Level Control System Sensors, Removing and Installing
- Front Wheel Acceleration Sensors, Removing and Installing
- Front Body Acceleration Sensor, Removing and Installing
- Rear Level Control System Sensors, Removing and Installing
- Rear Wheel Acceleration Sensors, Removing and Installing
- Rear Body Acceleration Sensor, Removing and Installing
- Air Hose, Servicing
- Air Supply Unit with Solenoid Valve Block, Assembly Overview
- Air Supply Unit, Removing and Installing
- Solenoid Valve Block, Line Arrangement
- Solenoid Valve, Removing and Installing
- Self-Leveling Suspension, Basic Setting
- Ride Height, Measuring
- 44 - Wheels, Tires, Wheel Alignment
- Wheel Bolts, Tightening Specifications
- Wheel Alignment
- Notes
- Wheel Alignment, General Information
- Electronic Stabilization Program
- Vehicle Data Label
- Test Prerequisites
- Measurement Preparations
- Rim Run-Out Compensation
- Vehicle Alignment, Overview
- Wheel Alignment Specifications
- Front Axle Camber, Centering
- Rear Axle Camber, Adjusting
- Rear Axle Toe, Adjusting
- Front Axle Toe, Adjusting
- Vehicle, Raising
- Toe Constant S, Adjusting
- Spring Blocks, Installing
- Tire Pressure Monitoring, Generation 1, Servicing
- Tire Pressure Monitoring, Generation 2, Servicing
- Notes
- Tire Pressure Monitoring, Component Overview
- Tire Pressure Sensor and Metal Valve, Component Overview
- Tire Pressure Sensor, Removing and Installing
- Metal Valve, Removing and Installing
- Left Front Tire Pressure Monitoring Transmitter, Removing and Installing
- Right Front Tire Pressure Monitoring Transmitter, Removing and Installing
- Left Rear Tire Pressure Monitoring Transmitter, Removing and Installing
- Right Rear Tire Pressure Monitoring Transmitter, Removing and Installing
- Tire Pressure Monitoring Antenna, Removing and Installing
- Tire Pressure Monitoring Control Module, Removing and Installing
- Tires, Wheels with Tire Pressure Monitoring, Mounting
- Wheels and Tires
- Adaptive Cruise Control
- Adaptive Cruise Control, Calibration
- 48 - Steering
- Steering Column
- Steering Gear, Assembly Overview
- Power Steering, Servicing
- Power Steering Pump
- Notes
- Power Steering Pump, 8-Cylinder, Checking Supply Pressure
- Power Steering Pump, 8-Cylinder, Assembly Overview
- Power Steering Pump, 8-Cylinder, Removing and Installing
- Power Steering Pump, W12 Engine, Checking Supply Pressure
- Power Steering Pump, W12 Engine, Assembly Overview
- Power Steering Pump, W12 Engine, Removing and Installing
- Power Steering Fluid Level, Checking
- Steering System, Bleeding
- Steering System, Checking for Leaks
- Suspension, Wheels, Steering
- Rear Suspension
- Suspension, Wheels, Steering
- 00 - General, Technical Data
- 40 - Front Suspension
- Front Suspension, Servicing
- Front Suspension Components, Assembly Overview
- Notes
- Air Spring Damper, Removing and Installing
- Air Spring Damper, Filling
- Mounting Bracket, Removing and Installing
- Upper Control Arm, Removing and Installing
- Upper Control Arm Bonded Rubber Bushing, Replacing
- Wheel Bearing Housing, Removing and Installing
- Wheel Bearing, Assembly Overview
- Wheel Bearing Unit, Removing and Installing
- Subframe, Lower Link and Stabilizer Bar, Assembly Overview
- Notes
- Subframe, Removing and Installing
- Subframe, Front Rubber Bonded Bushings, Replacing
- Subframe, Rear Rubber Bonded Bushing, Replacing
- Subframe, Rear Hydraulic Rubber Bonded Bushing, Replacing
- Stabilizer Bar, Removing and Installing
- Track Control Arm, Removing and Installing
- Guide Link, Removing and Installing
- Drive Axle, Overview
- I - Drive Axle with Triple Roller Joint AAR 2900, Assembly Overview
- II - Drive Axle with Peened Triple Roller Joint AAR 3300i, Assembly Overview
- 42 - Rear Suspension
- Rear Axle, Servicing
- I - Subframe, Assembly Overview
- II - Control Arm, Tie Rod and Air Spring Damper, Assembly Overview
- Notes
- Air Spring Damper, Removing and Installing
- Air Spring Damper, Filling
- Stabilizer Bar, Removing and Installing
- Upper Control Arm, Removing and Installing
- Tie Rod, Removing and Installing
- Stabilizer Bar to Lower Control Arm Connecting Links, Removing and Installing
- Tie Rod to Lower Control Arm Connecting Links, Removing and Installing
- Lower Control Arm, Removing and Installing
- III - Wheel Bearing, Assembly Overview
- IV - Drive Axle, Assembly Overview
- Drive Axle, Servicing
- 43 - Self Leveling Suspension
- Vehicle Lift Mode
- Self-Leveling Suspension, Servicing
- Notes
- Air Spring Damper and Self-Leveling Suspension, Fault Finding
- Self-Leveling Suspension, Components Locations
- Level Control System Control Module, Removing and Installing
- Front Level Control System Sensors, Removing and Installing
- Front Wheel Acceleration Sensors, Removing and Installing
- Front Body Acceleration Sensor, Removing and Installing
- Rear Level Control System Sensors, Removing and Installing
- Rear Wheel Acceleration Sensors, Removing and Installing
- Rear Body Acceleration Sensor, Removing and Installing
- Air Hose, Servicing
- Air Supply Unit with Solenoid Valve Block, Assembly Overview
- Air Supply Unit, Removing and Installing
- Solenoid Valve Block, Line Arrangement
- Solenoid Valve, Removing and Installing
- Self-Leveling Suspension, Basic Setting
- Ride Height, Measuring
- 44 - Wheels, Tires, Wheel Alignment
- Wheel Bolts, Tightening Specifications
- Wheel Alignment
- Notes
- Wheel Alignment, General Information
- Electronic Stabilization Program
- Vehicle Data Label
- Test Prerequisites
- Measurement Preparations
- Rim Run-Out Compensation
- Vehicle Alignment, Overview
- Wheel Alignment Specifications
- Front Axle Camber, Centering
- Rear Axle Camber, Adjusting
- Rear Axle Toe, Adjusting
- Front Axle Toe, Adjusting
- Vehicle, Raising
- Toe Constant S, Adjusting
- Spring Blocks, Installing
- Tire Pressure Monitoring, Generation 1, Servicing
- Tire Pressure Monitoring, Generation 2, Servicing
- Notes
- Tire Pressure Monitoring, Component Overview
- Tire Pressure Sensor and Metal Valve, Component Overview
- Tire Pressure Sensor, Removing and Installing
- Metal Valve, Removing and Installing
- Left Front Tire Pressure Monitoring Transmitter, Removing and Installing
- Right Front Tire Pressure Monitoring Transmitter, Removing and Installing
- Left Rear Tire Pressure Monitoring Transmitter, Removing and Installing
- Right Rear Tire Pressure Monitoring Transmitter, Removing and Installing
- Tire Pressure Monitoring Antenna, Removing and Installing
- Tire Pressure Monitoring Control Module, Removing and Installing
- Tires, Wheels with Tire Pressure Monitoring, Mounting
- Wheels and Tires
- Adaptive Cruise Control
- Adaptive Cruise Control, Calibration
- 48 - Steering
- Steering Column
- Steering Gear, Assembly Overview
- Power Steering, Servicing
- Power Steering Pump
- Notes
- Power Steering Pump, 8-Cylinder, Checking Supply Pressure
- Power Steering Pump, 8-Cylinder, Assembly Overview
- Power Steering Pump, 8-Cylinder, Removing and Installing
- Power Steering Pump, W12 Engine, Checking Supply Pressure
- Power Steering Pump, W12 Engine, Assembly Overview
- Power Steering Pump, W12 Engine, Removing and Installing
- Power Steering Fluid Level, Checking
- Steering System, Bleeding
- Steering System, Checking for Leaks
- Suspension, Wheels, Steering
- Suspension Control Systems
- Suspension, Wheels, Steering
- 00 - General, Technical Data
- 40 - Front Suspension
- Front Suspension, Servicing
- Front Suspension Components, Assembly Overview
- Notes
- Air Spring Damper, Removing and Installing
- Air Spring Damper, Filling
- Mounting Bracket, Removing and Installing
- Upper Control Arm, Removing and Installing
- Upper Control Arm Bonded Rubber Bushing, Replacing
- Wheel Bearing Housing, Removing and Installing
- Wheel Bearing, Assembly Overview
- Wheel Bearing Unit, Removing and Installing
- Subframe, Lower Link and Stabilizer Bar, Assembly Overview
- Notes
- Subframe, Removing and Installing
- Subframe, Front Rubber Bonded Bushings, Replacing
- Subframe, Rear Rubber Bonded Bushing, Replacing
- Subframe, Rear Hydraulic Rubber Bonded Bushing, Replacing
- Stabilizer Bar, Removing and Installing
- Track Control Arm, Removing and Installing
- Guide Link, Removing and Installing
- Drive Axle, Overview
- I - Drive Axle with Triple Roller Joint AAR 2900, Assembly Overview
- II - Drive Axle with Peened Triple Roller Joint AAR 3300i, Assembly Overview
- 42 - Rear Suspension
- Rear Axle, Servicing
- I - Subframe, Assembly Overview
- II - Control Arm, Tie Rod and Air Spring Damper, Assembly Overview
- Notes
- Air Spring Damper, Removing and Installing
- Air Spring Damper, Filling
- Stabilizer Bar, Removing and Installing
- Upper Control Arm, Removing and Installing
- Tie Rod, Removing and Installing
- Stabilizer Bar to Lower Control Arm Connecting Links, Removing and Installing
- Tie Rod to Lower Control Arm Connecting Links, Removing and Installing
- Lower Control Arm, Removing and Installing
- III - Wheel Bearing, Assembly Overview
- IV - Drive Axle, Assembly Overview
- Drive Axle, Servicing
- 43 - Self Leveling Suspension
- Vehicle Lift Mode
- Self-Leveling Suspension, Servicing
- Notes
- Air Spring Damper and Self-Leveling Suspension, Fault Finding
- Self-Leveling Suspension, Components Locations
- Level Control System Control Module, Removing and Installing
- Front Level Control System Sensors, Removing and Installing
- Front Wheel Acceleration Sensors, Removing and Installing
- Front Body Acceleration Sensor, Removing and Installing
- Rear Level Control System Sensors, Removing and Installing
- Rear Wheel Acceleration Sensors, Removing and Installing
- Rear Body Acceleration Sensor, Removing and Installing
- Air Hose, Servicing
- Air Supply Unit with Solenoid Valve Block, Assembly Overview
- Air Supply Unit, Removing and Installing
- Solenoid Valve Block, Line Arrangement
- Solenoid Valve, Removing and Installing
- Self-Leveling Suspension, Basic Setting
- Ride Height, Measuring
- 44 - Wheels, Tires, Wheel Alignment
- Wheel Bolts, Tightening Specifications
- Wheel Alignment
- Notes
- Wheel Alignment, General Information
- Electronic Stabilization Program
- Vehicle Data Label
- Test Prerequisites
- Measurement Preparations
- Rim Run-Out Compensation
- Vehicle Alignment, Overview
- Wheel Alignment Specifications
- Front Axle Camber, Centering
- Rear Axle Camber, Adjusting
- Rear Axle Toe, Adjusting
- Front Axle Toe, Adjusting
- Vehicle, Raising
- Toe Constant S, Adjusting
- Spring Blocks, Installing
- Tire Pressure Monitoring, Generation 1, Servicing
- Tire Pressure Monitoring, Generation 2, Servicing
- Notes
- Tire Pressure Monitoring, Component Overview
- Tire Pressure Sensor and Metal Valve, Component Overview
- Tire Pressure Sensor, Removing and Installing
- Metal Valve, Removing and Installing
- Left Front Tire Pressure Monitoring Transmitter, Removing and Installing
- Right Front Tire Pressure Monitoring Transmitter, Removing and Installing
- Left Rear Tire Pressure Monitoring Transmitter, Removing and Installing
- Right Rear Tire Pressure Monitoring Transmitter, Removing and Installing
- Tire Pressure Monitoring Antenna, Removing and Installing
- Tire Pressure Monitoring Control Module, Removing and Installing
- Tires, Wheels with Tire Pressure Monitoring, Mounting
- Wheels and Tires
- Adaptive Cruise Control
- Adaptive Cruise Control, Calibration
- 48 - Steering
- Steering Column
- Steering Gear, Assembly Overview
- Power Steering, Servicing
- Power Steering Pump
- Notes
- Power Steering Pump, 8-Cylinder, Checking Supply Pressure
- Power Steering Pump, 8-Cylinder, Assembly Overview
- Power Steering Pump, 8-Cylinder, Removing and Installing
- Power Steering Pump, W12 Engine, Checking Supply Pressure
- Power Steering Pump, W12 Engine, Assembly Overview
- Power Steering Pump, W12 Engine, Removing and Installing
- Power Steering Fluid Level, Checking
- Steering System, Bleeding
- Steering System, Checking for Leaks
- Suspension, Wheels, Steering
- Wheel Alignment
- Suspension, Wheels, Steering
- 00 - General, Technical Data
- 40 - Front Suspension
- Front Suspension, Servicing
- Front Suspension Components, Assembly Overview
- Notes
- Air Spring Damper, Removing and Installing
- Air Spring Damper, Filling
- Mounting Bracket, Removing and Installing
- Upper Control Arm, Removing and Installing
- Upper Control Arm Bonded Rubber Bushing, Replacing
- Wheel Bearing Housing, Removing and Installing
- Wheel Bearing, Assembly Overview
- Wheel Bearing Unit, Removing and Installing
- Subframe, Lower Link and Stabilizer Bar, Assembly Overview
- Notes
- Subframe, Removing and Installing
- Subframe, Front Rubber Bonded Bushings, Replacing
- Subframe, Rear Rubber Bonded Bushing, Replacing
- Subframe, Rear Hydraulic Rubber Bonded Bushing, Replacing
- Stabilizer Bar, Removing and Installing
- Track Control Arm, Removing and Installing
- Guide Link, Removing and Installing
- Drive Axle, Overview
- I - Drive Axle with Triple Roller Joint AAR 2900, Assembly Overview
- II - Drive Axle with Peened Triple Roller Joint AAR 3300i, Assembly Overview
- 42 - Rear Suspension
- Rear Axle, Servicing
- I - Subframe, Assembly Overview
- II - Control Arm, Tie Rod and Air Spring Damper, Assembly Overview
- Notes
- Air Spring Damper, Removing and Installing
- Air Spring Damper, Filling
- Stabilizer Bar, Removing and Installing
- Upper Control Arm, Removing and Installing
- Tie Rod, Removing and Installing
- Stabilizer Bar to Lower Control Arm Connecting Links, Removing and Installing
- Tie Rod to Lower Control Arm Connecting Links, Removing and Installing
- Lower Control Arm, Removing and Installing
- III - Wheel Bearing, Assembly Overview
- IV - Drive Axle, Assembly Overview
- Drive Axle, Servicing
- 43 - Self Leveling Suspension
- Vehicle Lift Mode
- Self-Leveling Suspension, Servicing
- Notes
- Air Spring Damper and Self-Leveling Suspension, Fault Finding
- Self-Leveling Suspension, Components Locations
- Level Control System Control Module, Removing and Installing
- Front Level Control System Sensors, Removing and Installing
- Front Wheel Acceleration Sensors, Removing and Installing
- Front Body Acceleration Sensor, Removing and Installing
- Rear Level Control System Sensors, Removing and Installing
- Rear Wheel Acceleration Sensors, Removing and Installing
- Rear Body Acceleration Sensor, Removing and Installing
- Air Hose, Servicing
- Air Supply Unit with Solenoid Valve Block, Assembly Overview
- Air Supply Unit, Removing and Installing
- Solenoid Valve Block, Line Arrangement
- Solenoid Valve, Removing and Installing
- Self-Leveling Suspension, Basic Setting
- Ride Height, Measuring
- 44 - Wheels, Tires, Wheel Alignment
- Wheel Bolts, Tightening Specifications
- Wheel Alignment
- Notes
- Wheel Alignment, General Information
- Electronic Stabilization Program
- Vehicle Data Label
- Test Prerequisites
- Measurement Preparations
- Rim Run-Out Compensation
- Vehicle Alignment, Overview
- Wheel Alignment Specifications
- Front Axle Camber, Centering
- Rear Axle Camber, Adjusting
- Rear Axle Toe, Adjusting
- Front Axle Toe, Adjusting
- Vehicle, Raising
- Toe Constant S, Adjusting
- Spring Blocks, Installing
- Tire Pressure Monitoring, Generation 1, Servicing
- Tire Pressure Monitoring, Generation 2, Servicing
- Notes
- Tire Pressure Monitoring, Component Overview
- Tire Pressure Sensor and Metal Valve, Component Overview
- Tire Pressure Sensor, Removing and Installing
- Metal Valve, Removing and Installing
- Left Front Tire Pressure Monitoring Transmitter, Removing and Installing
- Right Front Tire Pressure Monitoring Transmitter, Removing and Installing
- Left Rear Tire Pressure Monitoring Transmitter, Removing and Installing
- Right Rear Tire Pressure Monitoring Transmitter, Removing and Installing
- Tire Pressure Monitoring Antenna, Removing and Installing
- Tire Pressure Monitoring Control Module, Removing and Installing
- Tires, Wheels with Tire Pressure Monitoring, Mounting
- Wheels and Tires
- Adaptive Cruise Control
- Adaptive Cruise Control, Calibration
- 48 - Steering
- Steering Column
- Steering Gear, Assembly Overview
- Power Steering, Servicing
- Power Steering Pump
- Notes
- Power Steering Pump, 8-Cylinder, Checking Supply Pressure
- Power Steering Pump, 8-Cylinder, Assembly Overview
- Power Steering Pump, 8-Cylinder, Removing and Installing
- Power Steering Pump, W12 Engine, Checking Supply Pressure
- Power Steering Pump, W12 Engine, Assembly Overview
- Power Steering Pump, W12 Engine, Removing and Installing
- Power Steering Fluid Level, Checking
- Steering System, Bleeding
- Steering System, Checking for Leaks
- Suspension, Wheels, Steering
- Wheels & Tire System
- Suspension, Wheels, Steering
- 00 - General, Technical Data
- 40 - Front Suspension
- Front Suspension, Servicing
- Front Suspension Components, Assembly Overview
- Notes
- Air Spring Damper, Removing and Installing
- Air Spring Damper, Filling
- Mounting Bracket, Removing and Installing
- Upper Control Arm, Removing and Installing
- Upper Control Arm Bonded Rubber Bushing, Replacing
- Wheel Bearing Housing, Removing and Installing
- Wheel Bearing, Assembly Overview
- Wheel Bearing Unit, Removing and Installing
- Subframe, Lower Link and Stabilizer Bar, Assembly Overview
- Notes
- Subframe, Removing and Installing
- Subframe, Front Rubber Bonded Bushings, Replacing
- Subframe, Rear Rubber Bonded Bushing, Replacing
- Subframe, Rear Hydraulic Rubber Bonded Bushing, Replacing
- Stabilizer Bar, Removing and Installing
- Track Control Arm, Removing and Installing
- Guide Link, Removing and Installing
- Drive Axle, Overview
- I - Drive Axle with Triple Roller Joint AAR 2900, Assembly Overview
- II - Drive Axle with Peened Triple Roller Joint AAR 3300i, Assembly Overview
- 42 - Rear Suspension
- Rear Axle, Servicing
- I - Subframe, Assembly Overview
- II - Control Arm, Tie Rod and Air Spring Damper, Assembly Overview
- Notes
- Air Spring Damper, Removing and Installing
- Air Spring Damper, Filling
- Stabilizer Bar, Removing and Installing
- Upper Control Arm, Removing and Installing
- Tie Rod, Removing and Installing
- Stabilizer Bar to Lower Control Arm Connecting Links, Removing and Installing
- Tie Rod to Lower Control Arm Connecting Links, Removing and Installing
- Lower Control Arm, Removing and Installing
- III - Wheel Bearing, Assembly Overview
- IV - Drive Axle, Assembly Overview
- Drive Axle, Servicing
- 43 - Self Leveling Suspension
- Vehicle Lift Mode
- Self-Leveling Suspension, Servicing
- Notes
- Air Spring Damper and Self-Leveling Suspension, Fault Finding
- Self-Leveling Suspension, Components Locations
- Level Control System Control Module, Removing and Installing
- Front Level Control System Sensors, Removing and Installing
- Front Wheel Acceleration Sensors, Removing and Installing
- Front Body Acceleration Sensor, Removing and Installing
- Rear Level Control System Sensors, Removing and Installing
- Rear Wheel Acceleration Sensors, Removing and Installing
- Rear Body Acceleration Sensor, Removing and Installing
- Air Hose, Servicing
- Air Supply Unit with Solenoid Valve Block, Assembly Overview
- Air Supply Unit, Removing and Installing
- Solenoid Valve Block, Line Arrangement
- Solenoid Valve, Removing and Installing
- Self-Leveling Suspension, Basic Setting
- Ride Height, Measuring
- 44 - Wheels, Tires, Wheel Alignment
- Wheel Bolts, Tightening Specifications
- Wheel Alignment
- Notes
- Wheel Alignment, General Information
- Electronic Stabilization Program
- Vehicle Data Label
- Test Prerequisites
- Measurement Preparations
- Rim Run-Out Compensation
- Vehicle Alignment, Overview
- Wheel Alignment Specifications
- Front Axle Camber, Centering
- Rear Axle Camber, Adjusting
- Rear Axle Toe, Adjusting
- Front Axle Toe, Adjusting
- Vehicle, Raising
- Toe Constant S, Adjusting
- Spring Blocks, Installing
- Tire Pressure Monitoring, Generation 1, Servicing
- Tire Pressure Monitoring, Generation 2, Servicing
- Notes
- Tire Pressure Monitoring, Component Overview
- Tire Pressure Sensor and Metal Valve, Component Overview
- Tire Pressure Sensor, Removing and Installing
- Metal Valve, Removing and Installing
- Left Front Tire Pressure Monitoring Transmitter, Removing and Installing
- Right Front Tire Pressure Monitoring Transmitter, Removing and Installing
- Left Rear Tire Pressure Monitoring Transmitter, Removing and Installing
- Right Rear Tire Pressure Monitoring Transmitter, Removing and Installing
- Tire Pressure Monitoring Antenna, Removing and Installing
- Tire Pressure Monitoring Control Module, Removing and Installing
- Tires, Wheels with Tire Pressure Monitoring, Mounting
- Wheels and Tires
- Adaptive Cruise Control
- Adaptive Cruise Control, Calibration
- 48 - Steering
- Steering Column
- Steering Gear, Assembly Overview
- Power Steering, Servicing
- Power Steering Pump
- Notes
- Power Steering Pump, 8-Cylinder, Checking Supply Pressure
- Power Steering Pump, 8-Cylinder, Assembly Overview
- Power Steering Pump, 8-Cylinder, Removing and Installing
- Power Steering Pump, W12 Engine, Checking Supply Pressure
- Power Steering Pump, W12 Engine, Assembly Overview
- Power Steering Pump, W12 Engine, Removing and Installing
- Power Steering Fluid Level, Checking
- Steering System, Bleeding
- Steering System, Checking for Leaks
- Wheel And Tire Guide - Current Models (General Information On Wheels/Tires (Passenger Vehicles) - New Beetle Cabriolet From Model Year 2003)
- 44 - Wheels, Tires, Wheel Alignment
- General information on wheels/tires (passenger vehicles)
- General information on wheels/tires (passenger vehicles)
- Official type designation
- General information
- Special models
- Speed ratings for tires
- Tires "80 series"
- Wheel bolts - tightening torques
- Modified wheel bolts for Sharan from model year 2001
- Disc wheels (rim) - pitch circle diameter
- Indications on disc wheels
- Multipart composite wheels
- Light alloy wheels with replaceable decoration elements
- Additional wheel housing enlargement (FLAPS)
- Information about wheels/tires (passenger vehicles)
- Tire wear/service life
- Rolling noises due to tires
- Vibration from wheels/tires
- Causes for vibration
- Balancing
- Road test, performing before balancing
- Balancing wheels on the stationary balancing machine
- Vibration Control Tire Balancer VAS 6230P/2
- Finish balancer
- Radial run-out and lateral run-out of wheel and tire
- Radial- and lateral run-out on wheel/tire, checking using Tire Dial Gauge V.A.G 1435
- Checking radial run-out and lateral run-out of wheel
- Matched mounting
- Flat spots in tires from standing
- Vehicle pulls to one side
- Tire damage
- Information about tires/wheels
- Lettering on tire side wall
- Explanation of tire lettering
- Cracking
- The rubber valve
- Tire storage
- Tire aging
- Care and treatment of light alloy wheels
- Wheels, rotating
- Notes for changing or mounting wheels
- Notes on using emergency wheels
- Winter tires
- Winter tires with speed rating "V"
- Extra Load (XL) V winter tires
- Maximum speeds for V and Extra Load (XL) winter tires
- Reinforced/Extra Load (XL) tires
- Snow chains
- Fox, from model year 2006
- Polo as of model year 2002
- Polo Fun model year 2004 through model year 2005
- CrossPolo from model year 2006
- Polo BlueMotion, from model year 2007
- Polo GTI from model year 2006
- Polo GTI Cup Edition, from model year 2007
- Golf from model year 2004
- Golf GTI, from model year 2005
- Golf R32, from model year 2006
- Cross Golf, from model year 2007
- Golf Plus from model year 2005
- Jetta from model year 2006
- New Beetle from model year 1999
- New Beetle Cabriolet from model year 2003
- General information on wheels/tires (passenger vehicles)
- 44 - Wheels, Tires, Wheel Alignment
- Wheel And Tire Guide - Current Models (TOURAN From Model Year 2003 - Recommended Off-Road Tires)
- 44 - Wheels, Tires, Wheel Alignment
- Notes
- Touran from model year 2003
- Eos from model year 2006
- Passat sedan, Passat wagon from model year 2006
- Phaeton from model year 2003
- Sharan from model year 1996
- Sharan from model year 1996
- Sharan, Sharan syncro, Type 7M model year 1996 to model year 2000
- Sharan, Sharan Syncro, Type 7M, model year 1996 to model year 2000, wheel assignment
- Sharan, Sharan 4 Motion, Type 7M model year 2001
- Wheel assignment Sharan, Sharan 4 Motion, Type 7M model year 2001
- Sharan, Sharan 4 Motion, Type 7M model year 2002 to model year 2007
- Wheel assignment Sharan, Sharan 4 Motion, Type 7M model year 2002 to model year 2007
- Touareg from model year 2003
- Touareg from model year 2003
- Touareg, Type 7L model year 2003 to model year 2007
- Wheel assignment Touareg, Type 7L model year 2003 to model year 2007
- Wheel repair kit for VW vehicles
- Spare tires and emergency wheels for VW vehicles
- Recommended summer tires
- Recommended summer tires
- Summer tires Fox from model year 2006
- Summer tires Polo as of model year 2002
- Summer tires, Polo Fun model year 2004 through model year 2005
- Summer tires, CrossPolo from model year 2006
- Polo BlueMotion, from model year 2007, summer tires
- Polo GTI, from model year 2007, summer tires
- Polo GTI Cup Edition, from model year 2007, summer tires
- Summer tires New Beetle from model year 1999
- Summer tires New Beetle Cabriolet from model year 2003
- Summer tires Golf from model year 2004
- Summer tires Golf GTI from model year 2005
- Summer tires, Golf R32 from model year 2006
- CrossGolf, from model year 2007, summer tires
- Summer tires Golf Plus from model year 2005
- Summer tires Jetta from model year 2006
- Summer tires Touran from model year 2003
- Summer tires, Eos from model year 2006
- Summer tires Passat from model year 2006
- Summer tires Phaeton from model year 2003
- Summer tires Sharan from model year 1996
- Summer tires Touareg from model year 2003
- Recommended all season tires
- Recommended all season tires
- All season tires, Polo from model year 2002
- All-season tires New Beetle from model year 1999
- All-season tires New Beetle Cabriolet from model year 2003
- All-season tires Golf from model year 2004
- CrossGolf, from model year 2007, all-season tires
- All-season tires Golf Plus from model year 2005
- All-season tires Jetta from model year 2006
- All-season tires Touran from model year 2003
- All season tires, Eos from model year 2006
- All-season tires Passat from model year 2006
- All-season tires Phaeton from model year 2003
- All-season tires Touareg from model year 2003
- Recommended winter tires
- Recommended winter tires
- Winter tires Fox from model year 2006
- Winter tires Polo as of model year 2002
- Winter tires, Polo Fun model year 2004 through model year 2006
- Winter tires, CrossPolo from model year 2006
- Polo BlueMotion, from model year 2007, winter tires
- Polo GTI, from model year 2007, winter tires
- Polo GTI Cup Edition, from model year 2007, winter tires
- Winter tires New Beetle from model year 1999
- Winter tires New Beetle Cabriolet from model year 2003
- Winter tires Golf from model year 2004
- Winter tires Golf GTI from model year 2005
- Winter tires, Golf R32 from model year 2006
- CrossGolf, from model year 2007, winter tires
- Winter tires Golf Plus from model year 2005
- Winter tires Jetta from model year 2006
- Winter tires Touran from model year 2003
- Winter tires, Eos from model year 2006
- Winter tires Passat from model year 2006
- Winter tires Phaeton from model year 2003
- Winter tires Sharan from model year 1996
- Winter tires Touareg from model year 2003
- Recommended off-road tires
- 44 - Wheels, Tires, Wheel Alignment
- Suspension, Wheels, Steering
- Electronic Suspension
- Transmission
- Automatic Trans
- 5 SPD. Automatic Transmission 01L All Wheel Drive
- 00 General, Technical Data
- 32 Torque converter
- 37 Automatic Transmission - Controls, Housing
- VAS 5051, connecting
- Electrical/electronic components and installed locations
- Electrical/electronic components and installed locations
- Notes
- Component location of Transmission Control Module (TCM) -J217-
- Transmission Control Module (TCM) -J217-
- Data Link Connector (DLC)
- Multi-Function Transmission Range (TR) Switch -F125-
- Wiring harness with integrated Transmission Fluid Temperature Sensor -G93-
- Valve body
- Transmission Vehicle Speed Sensor (VSS) -G38- / Transmission Output Speed (RPM) Sensor G195
- Transmission Input Speed (RPM) Sensor G182
- Tiptronic Switch -F189-
- Shift lock solenoid -N110-
- Ignition Switch Key Lock Solenoid -N376-
- Steering wheel Tiptronic switch -E389-
- Transmission Range (TR) display -Y6-
- Electrical/electronic components and installed locations
- Selector lever mechanism, servicing
- Selector lever mechanism, servicing
- Selector lever handle, removing and installing
- Shift mechanism, removing and installing
- Shift mechanism, disassembling and assembling
- Selector lever, releasing when there is no electrical power
- Selector lever cable, checking and adjusting
- Selector lever cable, removing and installing
- Transmission, removing and installing (vehicles with 12-cylinder engine)
- ATF level, checking and topping off
- Schematic overview of power transfer, All Wheel Drive (AWD)
- ATF lines and ATF cooler
- 38 Automatic Transmission - Gears, Hydraulic controls
- 39F Final drive, Differential (front)
- 39R Final drive, Differential (rear)
- Driveshaft, removing and installing
- Final drive gear oil
- Driveshaft flange seal
- Drive flange seals, replacing (rear final drive installed)
- Radial play at driveshaft flange, determining
- Rear final drive, removing and installing
- Rear final drive, disassembling and assembling
- Differential, disassembling and assembling
- Differential, disassembling and assembling
- Notes
- Clamp rear final drive in assembly fixture
- Driving small tapered roller bearing outer race out of housing
- Pressing small tapered roller bearing outer race into housing to stop
- Pulling off small tapered roller bearing inner race
- Pressing on small tapered roller bearing inner race
- Pulling off large tapered roller bearing inner race
- Pressing on large tapered roller bearing inner race
- Driving off tapered roller bearing outer race from cover
- Pressing tapered roller bearing outer race into cover
- Driving ring gear from housing
- Installing ring gear
- Installing small differential bevel gears
- Adjusting differential bevel gears
- Table of adjustment shims
- Differential, disassembling and assembling
- Differential, removing and installing
- Pinion shaft, servicing
- Pinion shaft, removing and installing, disassembling and assembling
- Notes
- Clamping rear final drive in assembly fixture
- Removing nut for pinion
- Pulling off flange
- Pulling out seal for driveshaft flange
- Pressing drive pinion off tapered roller bearing inner race
- Pulling off small tapered roller bearing outer race
- Driving out large outer race/tapered roller bearing
- Pressing off large tapered roller bearing inner race
- Pressing on large tapered roller bearing inner race
- Pulling in large tapered roller bearing outer race
- Pressing in small tapered roller bearing outer race
- Inserting small tapered roller bearing inner race
- Inserting O-ring
- Driving in seal for driveshaft flange
- Installing flange
- Tightening nut for pinion and adjusting friction torque
- Measuring friction torque
- Securing nut for pinion
- Pinion shaft, removing and installing, disassembling and assembling
- Ring gear and pinion, adjusting
- Servicing 5 SPD. Automatic Transmission 01L
- 00 General, Technical Data
- 32 Torque converter
- 37 Automatic Transmission - Controls, Housing
- Transmission, attaching to assembly stand
- Planetary gear, disassembling and assembling
- Clutch "F" with free-running hub. disassembling and assembling
- Tower "I", disassembling and assembling
- Clutch "C" with sun shaft, assembly overview
- Clutch "C" with sun shaft, disassembling and assembling
- Clutch "D" , assembly overview
- Clutch "E" - component overview
- Clutch "D/E" , disassembling and assembling
- Planetary drive, assembly overview
- Planetary drive, disassembling and assembling
- Assembling tower "I"
- Tower "II", disassembling and assembling
- Shift rod, removing and installing
- 39F Final drive, Differential (front)
- ATF pump, disassembling and assembling
- Oil tubes
- Transmission components, evaluating wear
- Evaluating wear by evaluating ATF color and impurities
- Clutch "F" with freewheel
- Clutch "C" with sun shaft
- Notes
- Checking coated and outer plate for wear
- Checking freedom of movement of valve ball in piston "C"
- Signs of wear at inner circumference of cylinder "C" caused by coated plate
- Signs of wear at outer circumference of cylinder "C" caused by coated plate
- Checking brass sleeves of sun shaft for wear
- Checking rectangular rings for wear
- Clutch "D"
- Clutch "E"
- Planetary drive
- Notes
- Checking outer splines of plate carrier "E" for notches caused by coated plate
- Checking needle bearing of shaft planetary carrier "I" for wear
- Checking contact surfaces, brass sleeve and needle bearing of shaft planetary carrier "II" for wear
- Checking contact surfaces, brass sleeve and needle bearing of shaft planetary carrier "III" for wear
- Clutch "A"
- Clutch "B"
- ATF pump
- 39R Final drive, Differential (rear)
- 5 SPD. Automatic Transmission 01L All Wheel Drive
- Transmission Control Systems
- 6.0L 12-CYL 4V Generic Scan Tool [BRP, Bap] - (20-Fuel Pump, Fuel Supply, Evaporative Emissions - 38-Automatic Transmission-Gears, Hydraulic Controls, Valve Body)
- 20 - Fuel Pump, Fuel Supply, Evaporative Emissions
- Fuel supply system, components
- Fuel supply system, components
- Working on fuel supply, safety precautions
- Rules of cleanliness
- Fuel tank with attachments and fuel filter - assembly overview
- Fuel delivery unit, sensor for fuel gauge and suction jet pump (right side), assembly overview
- Fuel delivery unit, sensor for fuel gauge and suction jet pump (left side), assembly overview
- Connection diagram for fuel lines and fuel tank components
- Empty fuel tank
- Fuel Pump (FP) unit, sender for fuel gauge and suction jet pump (right side), removing and installing
- Fuel Pump (FP) unit, sender for fuel gauge and suction jet pump (left side), removing and installing
- Fuel pumps, checking
- Notes
- Check function and voltage supply of fuel pumps
- Transfer Fuel Pump (FP) G23, test sequence
- Fuel Pump (FP) G6, test sequence
- Fuel Pump (FP), checking delivery quantity
- Flow quantity of Transfer Fuel Pump (FP) G23, checking
- Flow quantity of Fuel Pump (FP) G6, checking
- Current pick-up of Fuel Pumps (FP), checking
- Check-valves of Fuel Pumps (FP), checking
- Check-valve of Transfer Fuel Pump (FP) G23, checking
- Check-valve of Fuel Pump (FP) G6, checking
- EVAP canister system
- Electronic engine power control (EPC)
- Fuel supply system, components
- 24 - Multiport Fuel Injection (MFI)
- Fuel injection system, servicing
- Fuel injection system, servicing
- Fuel Injection system, general notes
- Safety precautions
- Rules of cleanliness
- Intake manifold, assembly overview (vehicles with engine code BAP)
- Upper section of intake manifold, assembly overview (vehicles with engine code BRP)
- Lower section of intake manifold, assembly overview (vehicles with engine code BRP)
- Fuel rail with fuel injectors - assembly overview
- Air filter - assembly overview
- Technical data
- Components of engine, checking
- Components of engine, checking
- Check oxygen sensor heater for oxygen sensors before catalytic converter
- Checking voltage supply and wiring to control module
- Ground (GND) activation of oxygen sensor heating, checking
- Oxygen sensor heater for oxygen sensors behind Three Way Catalytic Converter (TWC), checking
- Voltage supply and wiring to control module, checking
- Checking Ground (GND) activation of oxygen sensor heating
- Mass Air Flow (MAF) sensor, checking
- Voltage supply of Mass Air Flow (MAF) sensors, checking
- Checking signal and Ground wires of Mass Air Flow (MAF) Sensors
- Throttle valve control modules, checking
- Checking wires to Engine Control Module (ECM)
- Coolant temperature sensor, checking
- Intake Air Temperature (IAT) sensor, checking
- Engine Control Module (ECM), checking wires to
- Engine Coolant Temperature (ECT) Sensor (on Radiator), checking
- Thermostat for characteristic map controlled engine cooling
- Coolant FC (Fan Control) Control Modules, checking
- Engine Speed (RPM) sensor, checking
- Fuel injectors, checking
- Resistance values of fuel injectors, checking
- Voltage supply, checking
- Activation and voltage supply, checking
- Injection quantity and proper seal of fuel injectors, checking
- Injection quantity, checking
- Fuel pressure regulator and residual pressure, checking
- Intake system, checking for leaks (false air)
- Function tests
- Engine Control Modules (ECM)
- Additional signals, checking
- Fuel injection system, servicing
- 26 - Exhaust System, Emission Controls
- Exhaust system
- Exhaust system
- Exhaust System, general notes
- Exhaust manifold with primary catalytic converters and attachments cylinder bank 1, assembly overview
- Exhaust manifold with primary catalytic converters and attachments cylinder bank 2, assembly overview
- Primary catalytic converters with exhaust pipes, aligning
- Catalytic converter with muffler and attachments, assembly overview
- Three Way Catalytic Converters (TWC), checking
- Secondary air system
- Secondary air system
- Secondary Air Injection (AIR) system, general notes
- Secondary Air Injection (AIR) system, function
- Secondary Air Injection (AIR) system on body side - assembly overview
- Secondary Air Injection (AIR) system on engine side - assembly overview
- Secondary Air Injection (AIR) system, checking for proper seal
- Secondary Air Injection (AIR) pump motors, checking
- Secondary Air Injection (AIR) valves, checking (vehicles with engine code BAP)
- Engine Control Module (ECM), checking wires to
- Combination valves, checking (vehicles with engine code BAP)
- Exhaust system
- 28 - Ignition system
- Ignition, servicing
- Ignition, servicing
- Ignition System, general notes
- Safety precautions
- Rules of cleanliness
- Ignition - assembly overview
- Test Data, Spark Plugs
- Ignition coils with power output stage, removing and installing
- Ignition coils with power output stages, checking
- Engine Control Module (ECM), checking wires to
- Camshaft Position (CMP) sensor, checking
- Checking wires to Engine Control Module (ECM)
- Check knock sensors
- Check camshaft adjustment valves
- Ignition, servicing
- 38 - Automatic Transmission - Gears, Hydraulic Controls, Valve Body
- Electrical components for regulating transmission, checking
- Electrical components for regulating transmission, checking
- Safety precautions when working on transmission
- Rules of cleanliness
- Multi-Function Transmission Range (TR) Switch, replacing
- Multi-Function Transmission Range (TR) Switch, checking
- Sensor for transmission RPM, checking
- Transmission Output RPM, checking
- Transmission Fluid Temperature Sensor, checking
- Solenoid valves in valve body, checking
- Pressure regulator valves in valve body, checking
- Transmission Control Module (TCM)
- Electrical components for regulating transmission, checking
- 20 - Fuel Pump, Fuel Supply, Evaporative Emissions
- Servicing 5 SPD. Automatic Transmission 01L
- 00 General, Technical Data
- 32 Torque converter
- 37 Automatic Transmission - Controls, Housing
- Transmission, attaching to assembly stand
- Planetary gear, disassembling and assembling
- Clutch "F" with free-running hub. disassembling and assembling
- Tower "I", disassembling and assembling
- Clutch "C" with sun shaft, assembly overview
- Clutch "C" with sun shaft, disassembling and assembling
- Clutch "D" , assembly overview
- Clutch "E" - component overview
- Clutch "D/E" , disassembling and assembling
- Planetary drive, assembly overview
- Planetary drive, disassembling and assembling
- Assembling tower "I"
- Tower "II", disassembling and assembling
- Shift rod, removing and installing
- 39F Final drive, Differential (front)
- ATF pump, disassembling and assembling
- Oil tubes
- Transmission components, evaluating wear
- Evaluating wear by evaluating ATF color and impurities
- Clutch "F" with freewheel
- Clutch "C" with sun shaft
- Notes
- Checking coated and outer plate for wear
- Checking freedom of movement of valve ball in piston "C"
- Signs of wear at inner circumference of cylinder "C" caused by coated plate
- Signs of wear at outer circumference of cylinder "C" caused by coated plate
- Checking brass sleeves of sun shaft for wear
- Checking rectangular rings for wear
- Clutch "D"
- Clutch "E"
- Planetary drive
- Notes
- Checking outer splines of plate carrier "E" for notches caused by coated plate
- Checking needle bearing of shaft planetary carrier "I" for wear
- Checking contact surfaces, brass sleeve and needle bearing of shaft planetary carrier "II" for wear
- Checking contact surfaces, brass sleeve and needle bearing of shaft planetary carrier "III" for wear
- Clutch "A"
- Clutch "B"
- ATF pump
- 39R Final drive, Differential (rear)
- 6.0L 12-CYL 4V Generic Scan Tool [BRP, Bap] - (20-Fuel Pump, Fuel Supply, Evaporative Emissions - 38-Automatic Transmission-Gears, Hydraulic Controls, Valve Body)
- Automatic Trans
- External Pages