Locking Cable, Removing And Installing: Installing

• Locking cable must not be kinked.
• Adjust locking cable after installing. Refer to Locking cable, adjusting  .

Fig 1: Guide Locking Cable Between Heater And Footwell Vent Behind Instrument Panel Support

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Guide locking cable between heater - 3  - and footwell vent - 1  - behind instrument panel support - 2  -.
• Move selector lever to "P" position.

Fig 2: Pull Locking Cable Out Of Cable Sleeve Slightly And Hook Into Locking Lever

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Pull locking cable out of cable sleeve slightly and hook into locking lever - arrow B  -.
• Hook support bracket for locking cable into selector bracket.
• Push locking cable into steering lock, refer to Pull out clip  .

When doing this, make sure flattened side of locking cable is pointing downwards.

Fig 3: Pushing On Clip Of Locking Cable

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Push on clip - 2  - of locking cable - 3  -.

Installation position: 

Push on clip from above. The angled ends of clip face steering lock

• Ensure that clip is properly engaged.
• Adjust locking cable, refer to Locking cable, adjusting  .
• Check operation of ignition key removal lock. Refer to Ignition key withdrawal lock, checking operation  .
• Install center console. Refer to 68 - INTERIOR EQUIPMENT .

• Install selector lever handle.
• Install left trim beneath instrument panel. Refer to 68 - INTERIOR EQUIPMENT .
• Install steering column trim. Refer to 70 - INTERIOR TRIM .
• Install handle for adjusting reach and height of steering column.

• Install steering wheel and airbag. Refer to 69 - PASSENGER PROTECTION - AIRBAGS, SEAT BELTS .
• Connect earth strap to battery.
• Enter radio code. Refer to 91 RADIO, TELEPHONE, NAVIGATION, TRIP COMPUTER .