Diagnostic Trouble Code (DTC) Memory, Erasing (Function 05)

NOTE: After DTC memory is erased, its contents are automatically output. If DTC memory cannot be erased, check DTC memory again and repair malfunction.

Requirements for erasing DTCs:
- Check DTC memory. See DIAGNOSTIC TROUBLE CODE (DTC) MEMORY, CHECKING (FUNCTION 02) .
- All malfunctions repaired
After successful DTC memory check, press buttons "0" and "5" to select function 05, "Erase DTC memory." Indicated on display:
- Rapid data transfer Q
- 05 - Erase DTC Memory
Press "Q" button to confirm input. Indicated on display:
- Rapid data transfer
- DTC Memory is erased!
Press right arrow button. Indicated on display:
- Rapid data transfer HELP
- Enter address word XX
NOTE: If "WARNING!, DTC memory was not checked" is displayed on the screen, test sequence is wrong. Follow test sequence exactly: first check DTC memory, repair malfunction(s) if necessary, then erase.
End Output. See END OUTPUT (FUNCTION 06) .