Windshield, removing and installing
NOTE:
The following list refers to Fig 1
.
- - Windshield
- Removing windshield. See WINDSHIELD, REMOVING .
- Installing windshield. See WINDSHIELD, INSTALLING .
- Curing times. See CURING TIME .
- - Ceramic layer
- - Sealing lip (component of pre-coat)
- - PUR adhesive sealant
- Cross section of bead: Width = 7 mm (0.28 in.), Height = 11 mm (0.43 in.) (including pre-coating, residual material on window glass and window flange)
- - Moulded headliner
- - Rear-view mirror mount
- PUR adhesive
- - Eccentric
- To adjust upper window gap
- - Dimension a = 4 mm (35 in. lb)
- - Water deflector
- Bonded to A-pillar
- Removing. See WATER DEFLECTOR, REMOVING .
- Installing. See WATER DEFLECTOR, INSTALLING .
- Curing time. See CURING TIME .
- Adhesive has been changed to PUR adhesive