LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2013 >> Kizashi Base, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 57 (Air Bag System) >> Diagnostic Information and Procedures >> DTC B1315: OCM Operating Temperature Out of Range >> DTC Troubleshooting
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC Troubleshooting

WARNING: This page is about a different car, the 2010 Suzuki Kizashi. However, it is still accessible from the selected car via links, so may be relevant.
DTC TROUBLESHOOTING CHART

Step Action YES NO
1  Was "Air Bag Diagnostic System Check" performed?  Go to Step 2. Go to AIR BAG DIAGNOSTIC SYSTEM CHECK .
2  OCM operation check 
  1. Leave vehicle for about an hour in outside temperature within 10 to 30°C (50 to 86°F) with all windows opened.
  2. Check that the surface temperature of the front passenger seat is within -20°C (4°F) to 65°C (149°F).
  3. Confirm that ignition mode of keyless push start system is in "OFF".
  4. Push engine switch to change ignition mode of keyless push start system to "ON".
  5. Check if DTC is detected.

Is DTC B1315 indicated? 		 Go to Step 3. It is in good condition. Room (seat cushion) temperature had been too high or low.
3  OCM power supply and ground circuits check 
  1. Check OCM power supply and ground circuits.

Is it in good condition? 		 Replace seat cushion built in OCM with sensor mat. Repair OCM power supply or ground circuits.
NOTE: Upon completion of inspection and repair work, perform the following items.
  • Reconnect all air bag system components and ensure all components are properly mounted.
  • Clear DTCs, referring to DTC CLEARANCE , if any DTC is detected.
  • Repeat AIR BAG DIAGNOSTIC SYSTEM CHECK  to confirm that the trouble has been solved.
scientia non olet · About LEMON Manuals