Forward-Impact Sensor Removal and Installation: Installation

Reference: FORWARD-IMPACT SENSOR INSPECTION 

1. Check that none of the following faulty conditions exists.
   • Bend, deformation or rust on apron side member outer panel.
   • Foreign material on sensor.
   • Direct arrow (1) on forward-impact sensor frontward.
     Fig 1: Identifying Arrow On Forward-Impact Sensor

     Courtesy of SUZUKI OF AMERICA CORP.
2. Align mounting pin (1) to mounting hole (2) of vehicle to install forward-impact sensor (3).
3. Tighten forward-impact sensor bolt to specified torque.

   Tightening torque 

   Forward impact-sensor bolt (a): 9 N.m (0.9 kg-m, 6.5 lbf-ft) 

4. Connect forward-impact sensor connector securely.
   Fig 2: Identifying Forward-Impact Sensor And Bolt

   Courtesy of SUZUKI OF AMERICA CORP.
5. Install front bumper. Refer to FRONT BUMPER REMOVAL AND INSTALLATION
6. Enable air bag system. Refer to ENABLING AIR BAG SYSTEM