LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2013 >> Kizashi Base, Automatic CVT Trans >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> Air Bag System >> Repair Instructions >> Enabling Air Bag System
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Enabling Air Bag System

  1. Make sure that removed components are installed and/or disconnected connectors are connected properly.
  2. Check that ignition mode is "OFF".
  3. Connect negative (-) cable at battery and/or install "A/B" fuse to junction block. Refer to PRECAUTIONS ON DISPOSAL OF AIR BAG AND SEAT BELT PRETENSIONER 
  4. Push engine switch to change ignition mode to "ON".
  5. Check if "AIR BAG" warning light flashes for about 6 seconds and then comes off.
  6. Perform AIR BAG SYSTEM CONSTRUCTION  if defective.