P Position Switch Inspection

WARNING: This page is about a different car, the 2010 Suzuki Kizashi. However, it is still accessible from the selected car via links, so may be relevant.

Remove console box, see CENTER CONSOLE BOX REMOVAL AND INSTALLATION .
Disconnect select lever connector.

Check for continuity between terminals "1" and "6" of select lever connector (1). If check result is not as specified, replace select lever assembly.

P position switch specification

ITEM SPECIFICATION

Condition	Specification
"P" range	Continuity
Other than "P" range	No continuity

Fig 1: Checking Continuity Between Terminals 1 And 6 Of Select Lever Connector

Courtesy of SUZUKI OF AMERICA CORP.