Tightening Torque Specifications
WARNING: This page is about a different car, the 2010 Suzuki Kizashi. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATION
| Fastening part | Tightening torque | ||
|---|---|---|---|
| N.m | kgf-m | lbf-ft | |
| Center support bolt | 45 | 4.6 | 33.5 |
| Propeller shaft front bolt | 26 | 2.7 | 19.5 |
| Propeller shaft rear bolt | 33 | 3.4 | 24.5 |
NOTE:
The specified tightening torque is described in the following.
PROPELLER SHAFT CONSTRUCTION
PROPELLER SHAFT CONSTRUCTION
Reference:
For the tightening torque of fastener not specified in this section, refer to FASTENERS INFORMATION .