Parking Brake Switch On-Vehicle Inspection

WARNING: This page is about a different car, the 2010 Suzuki Kizashi. However, it is still accessible from the selected car via links, so may be relevant.

Remove floor console box, see CENTER CONSOLE BOX REMOVAL AND INSTALLATION .
Disconnect parking brake switch connector from parking brake switch on parking brake lever.
Check parking brake switch for continuity between parking brake switch terminal and vehicle body. If faulty, replace parking brake switch.
Parking brake switch specification

Parking brake released: No continuity

Parking brake lever pulled up: Continuity exists

Fig 1: Checking Parking Brake Switch For Continuity Between Parking Brake Switch Terminal And Vehicle Body
Courtesy of SUZUKI OF AMERICA CORP.