Fuel Injector Removal and Installation: Removal
WARNING: This page is about a different car, the 2010 Suzuki Kizashi. However, it is still accessible from the selected car via links, so may be relevant.
- Relieve fuel pressure, see Fuel Pressure Relief Procedure .
- Disconnect negative (-) cable from battery.
- Remove engine cover.
- Disconnect PCV valve hose, see CYLINDER HEAD COVER REMOVAL AND INSTALLATION .
- Disconnect ignition coil connectors and fuel injector connectors.
- Remove clamp of engine harness from fuel delivery pipe.
- Remove fuel pipe stopper (1) and disconnect fuel feed pipe (3) from fuel delivery pipe (2), see Fuel Leakage Check Procedure .
- Remove fuel delivery pipe (2).
- Remove fuel injector(s) (4).