Fuel Leakage Check Procedure

WARNING: This page is about a different car, the 2010 Suzuki Kizashi. However, it is still accessible from the selected car via links, so may be relevant.

After performing any service on fuel system, check that there is no fuel leakage as follows.

Apply fuel pressure to fuel feed line according to the following procedure.
1. a) Push engine switch to change ignition mode to "ON" and to operate fuel pump.
2. b) After 2 sec., push engine switch to change ignition mode to "OFF".
3. Repeat Step a) and b) three or four times.
Check that there is no fuel leakage from any part of fuel system.