LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2013 >> Kizashi Base, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 61 (Engine Cooling System) >> Repair Instructions >> Radiator Cooling Fan Assembly On-Vehicle Inspection >> Radiator Cooling Fan Operation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Radiator Cooling Fan Operation

WARNING: This page is about a different car, the 2010 Suzuki Kizashi. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect scan tool to DLC (1) with ignition mode of keyless push start system in "OFF".

    Special Tool 

    1. SUZUKI scan tool (SUZUKI-SDT) 
    Fig 1: Connecting Scan Tool To DLC
    G06528239Courtesy of SUZUKI OF AMERICA CORP.
  2. Push engine switch to change ignition mode to "ON" and clear DTC, see DTC CLEARANCE .
  3. Select the "Radiator Fan" function in "Active Test".
  4. Check radiator cooling fan operation at low, mid and high modes.

    If any abnormality is found, check cooling fan control system referring to RADIATOR COOLING FAN CONTROL SYSTEM CHECK .

    Radiator cooling fan operation 

    RADIATOR COOLING FAN OPERATION CHART

      Main fan motor Sub fan motor
    OFF OFF OFF
    Low mode Low speed Low speed
    Mid mode OFF High speed
    High mode High speed High speed