Front Seat Belt Removal and Installation: Installation
Reference: FRONT SEAT BELT INSPECTION
Install in reverse order of removal, noting the following.
- Seat belt anchor bolts should have an unified fine thread (7/16-20 UNF). Under no circumstances should any different sized or metric screw threads be used.
- Connect seat belt pretensioner connector (1) to retractor (seat belt pretensioner) securely as following steps.
- Make sure that lock button (2) is unlock position.
- Insert connector to retractor (seat belt pretensioner) until it stops with unlocked lock button (2).
- Lock connector securely by showing in lock button (2).
- Enable air bag system. Refer to ENABLING AIR BAG SYSTEM (Except advanced Air Bag) or ENABLING AIR BAG SYSTEM (Advanced Air Bag).