Tightening Torque Specifications
WARNING: This page is about a different car, the 2011 Suzuki SX4. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
For fastener with * (asterisk) below, be sure to tighten it according to specified procedure in "Repair Instructions".
TIGHTENING TORQUE SPECIFICATIONS
| Fastening part | Tightening torque | Note | ||
|---|---|---|---|---|
| N.m | kgf-m | lbf-ft | ||
| Center bearing support bolt* | 50 | 5.1 | 37.0 | (2WD-M/T model) |
| Center bearing support bolt* | 55 | 5.6 | 40.5 | (2WD-CVT model) |
NOTE:
The specified tightening torque is described in the following.
FRONT DRIVE SHAFT ASSEMBLY COMPONENT LOCATION
FRONT DRIVE SHAFT COMPONENTS
FRONT DRIVE SHAFT ASSEMBLY COMPONENT LOCATION
FRONT DRIVE SHAFT COMPONENTS
Reference:
For the tightening torque of fastener not specified in this section, refer to FASTENERS INFORMATION .