Rear Seat Belt Replacement

WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Rear Seat Belt Retractor & Bolt

Courtesy of SUZUKI OF AMERICA CORP.

CALLOUT COMPONENT NAME

Callout	Component Name
Preliminary Procedures Remove the rear quarter lower trim panel. Refer to REAR QUARTER LOWER TRIM PANEL REPLACEMENT . Remove the rear quarter upper trim panel. Refer to LOCK PILLAR UPPER GARNISH MOLDING REPLACEMENT (LEFT SIDE) and LOCK PILLAR UPPER GARNISH MOLDING REPLACEMENT (RIGHT SIDE) .
1	Rear Seat Belt Retractor Bolt (Qty: 3) CAUTION: Refer to FASTENER NOTICE . Tip: Apply GM P/N 12345382 (Canadian P/N 10953489), Permatex® 24200 or equivalent on all seat belt fasteners prior to installation. Tightening torque 45 N.m (33 lb ft)
2	Rear Seat Belt Retractor Tip: Make sure alignment slots are aligned correctly on reinstallation.