Brake Pedal Position Sensor Replacement

WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Brake Pedal Position Sensor Bolt & Electrical Connector

Courtesy of SUZUKI OF AMERICA CORP.

DIAGNOSIS PROCEDURE TABLE - BRAKE PEDAL POSITION SENSOR

Callout	Component Name
Preliminary Procedures Remove the left side instrument panel sound insulator. Refer to INSTRUMENT PANEL INSULATOR PANEL REPLACEMENT - LEFT SIDE . Remove the left side knee bolster. Refer to KNEE BOLSTER REPLACEMENT .
1	Brake Pedal Position Sensor Bolt Calibrate the position sensor. Refer to BRAKE PEDAL POSITION SENSOR CALIBRATION . Do not reuse the position sensor or bolt. Always use a new sensor and bolt.
2	Brake Pedal Position Sensor Assembly CAUTION: Refer to FASTENER NOTICE . Tip: Disconnect the electrical connector. Tightening torque 2.5 N.m (22 lb in)